Thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine on the basis of a new isentropic exponent

The thermodynamic analysis and parametric study of an intercooled–reheat closed-cycle gas turbine is presented in this paper, on the basis of a new (harmonic mean) isentropic exponent. An analytical expression is derived for the optimum pressure ratio and maximum non-dimensional net work output. It is found that the optimum pressure ratio and the maximum non-dimensional net work are high when the ratio of extreme temperatures of cycle (i.e. T _max and T _min) and isentropic efficiencies of compressor and turbine (i.e. η_c and η_t) are high. The theoretical results are also compared with the practical conditions of power plant.     

Heat transfer from an immersed vertical tube to a gas fluidized bed

Fluidization and heat transfer experiments have been conducted in gas fluidized beds of two different sizes, viz., 305 × 305 mm² and 305 × 152.5 mm² and with particles of silica sands ($\text{d}\text{?}{}_{\mathrm{p}}\text{= 167, 488, 504, and 745 μ}\text{m}$), glass beads (d_p = 427 μm) and millet seeds (d_p = 2064 μm) with immersed smooth vertical heated tubes of diameter 12.7, 28.6, and 50.8 mm. Important conclusions are drawn concerning the dependence of heat transfer coefficient on fluidization velocity, bed particle diameter, tube diameter and nature of bed fluidization. The heat transfer data are employed to assess the available literature correlations for heat transfer coefficient and for its maximum value.     

A novel photogalvanic cell using anthraquinone-2-sulfonate

A photoelectrochemical cell based on the photochemistry of anthraquinone-2-sulfonate (D) has been set up. In the presence of formate at pH 11.0, D on illumination produces D^? or D^2?. In the absence of oxygen, at the platinum electrode the anodic reaction is D^? → D + e, or D^2? → D + 2e, and at the dark electrode the cathodic reaction is O₂ + 2H₂O + 4e → 4OH^?. The open circuit potential of the cell is 500 mV. The short circuit current is 180 μA. The cell has been recycled at least eight times. The efficiency increases with platinized platinum electrode in the dark chamber. The steady current under illumination is 65 μA with the same open circuit voltage of 500 mV. The short circuit current is 250 μA. With a CdS electrode in the illuminated chamber the efficiency is even better. The open circuit voltage is 560 mV. After charging by illumination for 8 h a steady current of 120 μA can be drawn from the cell, with illumination off, for 40 h. The short circuit current is 450 μA. The maximum power output is 4.2 × 10^?6W The cell can be recycled at least four times without any loss in efficiency. Grey deposition on the CdS electrode possibly indicates electrode decomposition.     

Passive solar heating of a non-airconditioned building with movable insulation over the roof pond

This paper presents a simple mathematical model for solar space heating in a non-airconditioned building with movable insulation over the roof pond. The building room considered is of rectangular shape (6 m × 5 m × 4 m) based on the ground. The effects of heat conduction to the ground, heat transfers to furnishings and heat losses due to air ventilation/infiltration have been taken into account in the general heat transfer analysis. The day-to-night change of insulation over the roof pond has been represented by a rectangular step function variation of the heat transfer coefficient at the pond's surface. An increase of 3 to 4°C in the room air temperature is achieved by means of movable insulation over the roof pond on a mild winter's day (17th February, 1982) in New Delhi.     

Thermoelectric cold-chain chests for storing/transporting vaccines in remote regions

The cold chain is one of the key elements of the preventive health-care delivery system. Vaccines have to be carried long distances, stored in remote places and during this period the temperature has to be maintained within certain specified values. Realizing the needs of such requirements, the Department of Science & Technology, New Delhi (Govt. of India) assigned a project to the R&D Division of MECON, Ranchi for development of Thermoelectric Cold-Chain Chest operated by 12 V DC vehicular battery. The resulting portable thermoelectric (i.e. Peltier effect) Cold-Chain Chest (TCC) operated successfully even in an ambient environment of 45 °C, mainly for preserving and transporting life-saving medicines for urban as well as rural areas.     

Premixed hydrogen-air combustion system for fuel cell systems

The advance of efficient hydrogen-air combustion systems has increasingly become of interest in the framework of the development of fuel cell systems, especially for the automotive sector. Therefore, compact modulating systems are required, with the additional demand of low emissions, to be integrated in a fuel cell system. A modulating combustion system based on combustion within inert porous media and an integrated heat exchanger has been developed and investigated. The system is able to handle premixed combustion of lean H₂/air mixtures at a surface load range of 1075 kW/m²-2150 kW/m², and a global equivalence ratio of ?=0.5. The special hydrogen-air mixing concept eliminates the risk of flame flashback and enables operation with very low NO_x emissions.     

Vascularization for cooling and mechanical strength

In this paper we explore the use of vascular design that provides cooling and mechanical strength at the same time. We illustrate the concept with a circular plate vascularized with embedded channels. The cooling fluid enters to the plate from the center or from the rim, and leaves after it cools the plate down to an allowable temperature level. The vascular cooling channels also affect the mechanical strength of the plate. We simulated numerically the thermofluid and mechanical behavior for three different structures; radial, dendrites with one pairing level and dendrites with two pairing levels. We found that for a given set of conditions (applied pressure difference, coolant inlet position, and number of the cooling channels) there is one configuration that is best; however, there is no single configuration that is best for all conditions.     

Onset of Darcy‐Brinkman Convection in a Binary Viscoelastic Fluid‐Saturated Porous Layer with Internal Heat Source

The onset of Darcy‐Brinkman convection in a binary viscoelastic fluid‐saturated sparsely packed porous layer with an internal heat source is studied using both linear and nonlinear stability analyses. The Oldroyd‐B model is employed to describe the rheological behavior of binary fluid. An extended form of the Darcy‐Oldroyd law incorporating Brinkman's correction and time derivative is used to describe the flow through a porous layer. The onset criterion for stationary, oscillatory, and finite amplitude convection is derived analytically. There is a competition between the processes of thermal diffusion, solute diffusion, and viscoelasticity that causes the convection to set in through an oscillatory mode rather than a stationary mode. The effect of internal Rayleigh number, relaxation and retardation parameters, solute Rayleigh number, Darcy number, Darcy‐Prandtl number, and Lewis number on the stability of a system is investigated and is shown graphically. The nonlinear theory based on the truncated representation of the Fourier series method is used to find heat and mass transfer. The transient behavior of the Nusselt and Sherwood numbers is obtained using numerical methods. Some known results are recovered for the particular cases of the present study. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res, 42(8): 676–703, 2013; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21056