Ultraviolet light inactivation of protozoa in drinking water: a Bayesian meta-analysis

To assess the dose of UV light needed to achieve specified levels of Giardia spp. cysts and Cryptosporidium spp. oocysts inactivation in drinking water, a Bayesian meta-analysis is used to analyze experimental data from several studies. Of the 20 studies identified by an extensive data collection effort, 14 (five reported experiments on Giardia and nine on Cryptosporidium) were selected for analysis based on a set of criteria. A substantial amount of the log inactivation data are reported as greater than a given inactivation level (i.e., censored data). The Bayesian hierarchical modeling approach used in this study not only properly addresses the common concerns in a meta-analysis but also provides a robust method for incorporating censored data. Different statistical models will result in different estimates of the UV doses needed to achieve a specific inactivation level. The Bayesian approach allows us to present the uncertainty in terms of risk, which is better suited for supporting US EPA in developing regulations.     

Trace element analysis of Cretan wines and wine products

The object of this research is to investigate the ways and the degree of contamination of Cretan grapes from the area of Chania and their alcoholic products, with the elements aluminium, arsenic, cadmium, copper, chromium, iron, lead, manganese, nickel and zinc. Fifteen samples of grapes were collected and used for the production of experimental wines from rinsed and unrinsed grapes. A microwave furnace was used for the digestion and dissolution of the experimental wines, the precipitates that originated in these wines, as well as the wines of the corresponding producers. The analyses of all mentioned samples as well as 34 local alcoholic distillates were performed using total reflection X-ray fluorescence and graphite furnace atomic absorption spectrometry. The concentrations for all the elements that were determined were almost in all cases, well below the maximum permissible levels by the Greek and the European Union legislation.     

The coagulation of a kaolinite suspension with aluminium sulphate

A study has been made of the coagulation of a 50 mg l⁻¹ aqueous suspension of kaolinite for a range of aluminium sulphate and hydrogen ion concentrations. The rate of flocculation was determined from jar tests after stirring for 1 h. The data permitted a stability limit diagram to be drawn from which some indication of the coagulation mechanisms of the system could be ascertained.     

Laboruntersuchungen zur Freisetzung von Unat aus einem Gestein unter oxischen naturnahen Bedingungen

Kurzfassung Im Labor wurden verschiedene Größen (pH-Wert, HCO ₃ —Gehalt, Präsenz von Fe(OH) ₃ ) untersucht, von denen angenommen werden konnte, dass sie die umweltrelevante Freisetzung von Uran aus Gesteinen (z. B. Haufwerken, Halden, Tailings) im neutralen und schwach basischen pH-Bereich (6 bis 9) beeinflussen. Hierzu wurde der Austrag von U _nat aus einem schwach vererzten Urangestein (2,31 %) in Batchversuchen untersucht. Diese Versuche wurden mit 8, 10 oder 40 g/l Gestein und Leitungs- bzw. Mineralwasser durchgeführt. Zum Vergleich wurden parallele Standversuche in deionisiertem Wasser, 0,1 M Na ₂ CO ₃ und 0,1 M H ₂ SO ₄ durchgeführt. Die Ergebnisse zeigen eine Begünstigung der Uranfreisetzung in Anwesenheit von Carbonat (gelöst oder in situ durch Dolomitauflösung entstanden), während die Rolle des Pyrits auf die Freisetzung deutlich komplexer ist. Das Erreichen eines Gleichgewichtszustands kann unter Umständen durch sorptive Einflüsse verzögert werden.

---

Investigations for the release of U_nat from ore bearing rock under natural near oxic conditions

Abstract The effects of carbonate concentration and the presence of iron hydroxide phases on uranium release into the environment were investigated under oxic conditions and in the pH range from 6 to 9. For this purpose not-shaken batch experiments were conducted with a constant amount (8, 10 or 40 g/l) of a uranium bearing rock and different types of water (deionised, tap and mineral water). For comparison parallel experiments were conducted with 0.1 M Na ₂ CO ₃ and 0.1 M H ₂ SO ₄ . The use of dolomite confirmed the favourable role of carbonate bearing minerals for U transport while the presence of pyrite on Uranium mobilisation was shown to be considerably more complex. This study shows that the approach of equilibrium conditions can be strongly delayed by sorption processes.

     

Soil salinity of urban turf areas irrigated with saline water: I. Spatial variability

With increasing use of saline water for irrigating urban landscapes, soil salinization is becoming a concern. This study examined spatial variation in soil salinity over the length of selected fairways at five golf courses, and of large turf areas at two public parks located in west Texas and southern New Mexico. Salinity of water used for irrigation ranged from 680 to 2700 mg L⁻¹, and the sites consisted mostly of Aridisols (upland soils) or Entisols (alluvial soils). Soil salinity distribution at sites consisting of deep Aridisols was spatially independent with the coefficient of variability (CV) ranging from 24 to 42%. The sites consisting of shallow Aridisols over a calcic horizon had erratic and random soil salinity distributions with an average CV of 37%. Since soil salinity distributions in Aridisols and Alfisols appeared to be spatially independent within the distance of fairways, soil sampling adequacy can be determined by the conventional probability statistics. However, salinity distributions at Entisols sites were spatially dependant to a length of 100 m or more. In addition, the clayey Entisols used for public parks had high levels of salt accumulation (>10 dS m⁻¹ in the saturation extract) with the CV exceeding 60%. When salinity readings were stratified by soil type distribution, the CV was reduced to 28% on the average. The number of samples required to obtain the mean salinity over a typical length of fairways (250–300 m) within a deviate range of 20% averaged 6 in deep sandy Aridisols and Alfisols, and 13 each in other cases, provided that sampling of Entisols is made based on soil type distributions. These sampling requirements are greater than those for field soil moisture or saturation water contents. The spacing to collect the required number of samples over the prevailing length of fairways was between 23 and 38 m. Soil sampling for salinity appraisal is most problematic in Entisols, but can be made simple if a detailed soil map is available. In Aridisols containing a calcic horizon, it is probable to have saline spots over poorly permeable caliche.     

A contribution to the study of some greek marbles

The use of marble in Architecture began on the 7th century B.C. and continued to be used without stop untill today. Greece and especially the East Macedonia region is an extremely privileged area on marble deposits both in quantities and qualities and colours. In the present work the main physical and engineering properties of some varieties of greek marbles are given and a comparison with the international standards is made. The experimental material (marbles) was from East Macedonia, Argolida-Arcadia and Magnessia, three of the biggest marble deposit areas in Greece. From the results obtained, it is concluded that the marbles examined satisfy all the international standard codes and thus they can be used as building stones and decoration materials.     

Reliability of corrosion-damaged steel structures using interval probability theory

Engineering decisions concerning the performance of existing structures must be made in the presence of uncertainties. The remaining capacity of corroded steel structures provides a good example of different aspects of uncertainty. These include: an unknown or partially known extent of damage; a variability in loading and an uncertain reserve of structural capacity depending on the mode of failure. The theory of structural reliability has been developed to provide a method of analysis for structural safety. In this paper, methods are proposed to compute the component reliability of corrosion-damaged steel members. The application of a recently developed theory called interval probability theory for system reliability is illustrated using the data obtained from actual samples of corroded beams.     

Gravity driven counterflow through an open door in a sealed room

Flow measurements using tracer gas techniques were made on the exterior doorway of a test house for indoor-outdoor temperature differences of 0.5–45 K. The time for door opening and closing was constant at 3.75 s, and fully open hold time varied from 0.5 s to 120 s. Predictions of a variable density steady flow model were in good agreement with the measurements when adjustments were made for the time-varying size of the opening and for the effect of cross-stream mixing between the incoming and outgoing air streams. The flow rate is shown to be governed by an effective density very close to the average of inflow and outflow densities, and the control condition at the doorway is fixed by the jet-like behavior of the inflow stream. Dependence of cross-stream mixing on interfacial stability caused the orifice and coefficient to increase from 0.4 to 0.6 as temperature difference increased. This varying orifice coefficient is well represented by the combination of a discharge coefficient for streamline contraction combined with a mixing coefficient which accounts for mixing between the inflow and outflow.     

Stress-Strain State of Weak Saturated Clay Beds of Embankments

Results are presented for laboratory and field tests of weak saturated soils serving as beds for embankments in Ho Chi Min City and various regions of the Mekong River Delta (Vietnam). A method is outlined for quantitative evaluation of the stress-strain state (SSS) of the weak saturated clayey beds (plane problem). A method is described for quantitative evaluation of the deformation and stability of weak beds in the initial, intermediate, and stabilized stages of the formation and transformation of the SSS. __________ Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 5, pp. 2–6, September–October, 2005.     

Lead contamination in tap water of households with children in Lower Saxony, Germany

Lead has numerous acute and chronic adverse effects on human beings. This is especially true for infants and children. The main path of lead ingestion in children can be different according to housing and living situation. The intake of lead through drinking water is commonly due to metal corrosion. The users plumbing can be an important factor. In recent years, many lead pipes in Germany have been replaced by pipes made of an alternative material. The aim of this study is to assess the present state of drinking water contamination and the resulting exposure of infants to lead. For this purpose mothers of new-born babies were offered a free examination of their drinking water. After a written declaration of consent had been obtained and after the infant in question had reached an age of 3 months, a stagnation sample of cold tap-water after overnight stagnation together with a random daytime sample was obtained from the family. The collected samples were analysed by atomic absorption spectrometry for their lead concentration. In total, 1485 samples from households were collected. Of the 1434 stagnation samples, 3.1% had lead concentrations greater than 0.01 mg/l (recommended limit of the WHO) and 0.6% had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The values for the 1474 random daytime samples were 2.1% above 0.01 mg/l and 0.2% greater than 0.04 mg/l, respectively. By region, the areas Bovenden, Friedland, Duderstadt, Northeim and Rosdorf were particularly affected. The highest measured concentrations of lead in the stagnation samples were 0.11 mg/l and 0.15 mg/l in the random daytime samples, respectively.