Influence of dietary iron deficiency on acute metal intoxication

The frequent difficulties encountered in the diagnosis of pediatric sarcomas, caused by the lack of observable differentiation at the light microscopic level, has led to the routine use of immunohistochemistry in pediatric surgical pathology. To a large degree the advent of this staining technique has led to the correct assessment of many perplexing lesions that previously would have been given inconclusive diagnoses. However, with increased usage and testing, it has become apparent that there are few, if any, "magic bullets" in immunohistochemistry for pediatric pathologists. Thus, it behooves diagnosticians to be careful in the usage of this technique, to be aware of possible discrepancies in its results, and to remember the ancillary nature of its application. The following article will review selected markers commonly used in pediatric surgical pathology, from both previous reports and the author's perspective, and will briefly consider several new phenotypic markers which have potential utility with childhood sarcomas.     

Creatine kinase isoenzymes in serum from cord blood and the blood of healthy full-term infants during the first three postnatal days

Isoenzymes of creatine kinase (ATP:creatine phosphotransferase; EC 2.7.3.2; CK) were measured by electrophoresis in serum from cord blood and skin-puncture blood taken from 45 healthy full-term infants during the first three postnatal days. Mean total CK activities (in U/L at 30 degrees C) were 185 in cord samples, 536 in samples taken between 5--8 h postnatally, 494 between 24--33 h, and 288 in the 72-100 h samples. Values for all three isoenzymes increased to a peak over this period, with the highest values generally being found in the samples taken 5--33 h after birth; the subsequent decline was most rapid for CK-BB. Serum CK isoenzymes in cord samples and those taken at 72--100 h in the 11 babies delivered by cesarian section did not differ significantly from those of babies delivered vaginally. However the postnatal increases in total CK, CK-MM, and CK-MB (but not in CK-BB) were significantly greater in those patients born by vaginal delivery. The reasons for the increases in CK isoenzymes after birth are not clear, but our results and reported studies on the ontogeny of CK suggest that CK-MB cannot be regarded as a "cardiac-specific" isoenzyme in the neonatal period.     

p53 codon 72 polymorphism in Taiwanese lung cancer patients: association with lung cancer susceptibility and prognosis

Previous studies have indicated that milrinone, a specific type III phosphodiesterase inhibitor, may be able to induce chloride secretion in cystic fibrosis (CF) tissues. We have now assessed the effect of this agent in vivo on the nasal epithelium of CF mutant mice and also in the nose and lungs of human subjects with CF. Wild-type mice showed a small hyperpolarization of the nasal potential difference (PD) in response to milrinone (100 microM, 1.6 +/- 0.6 mV, n = 8, P < 0.05). In contrast, CF mice carrying either the most common human mutation of the gene for the CF transmembrane regulator (CFTR), DeltaF508 (protein mislocalized), or the G551D mutation (protein normally localized) failed to demonstrate this response. Milrinone perfused alone had no significant effect on the baseline nasal PD of human subjects without CF (14.7 +/- 4.0 mV preperfusion; 15.3 +/- 4.6 mV postperfusion), but significantly (P < 0.05) augmented the hyperpolarization induced by a subsequently perfused low-chloride solution (with milrinone, 36.8 +/- 3.0 mV, n = 6; without milrinone, 18.1 +/- 2.2 mV, n = 19). In contrast, in human subjects with CF (n = 6), milrinone alone significantly (P < 0. 05) altered the nasal baseline PD (52.2 +/- 3.3 mV preperfusion; 57. 4 +/- 4.2 mV, postperfusion) but not the subsequent responses to the low-chloride solution (with milrinone, 1.1 +/- 2.2 mV, n = 4; without milrinone, 0.6 +/- 0.5 mV, n = 28) or to isoproterenol (100 microM). In a separate study in subjects (n = 6) with the DeltaF508 mutation, nasal coadministration of milrinone with isoproterenol produced no effect in the presence of amiloride and a low-chloride solution (-0.8 +/- 0.5 mV). This was also the case in the nasal epithelium of CF subjects (n = 4) carrying at least one G551D allele (-0.3 +/- 0.8 mV). Similarly, milrinone did not hyperpolarize the PD of either the tracheal (n = 6) or segmental (n = 6) airways of CF subjects (DeltaF508) when applied topically in vivo in the presence of amiloride, isoproterenol, or adenosine triphosphate (all 100 microM) in a low-chloride solution. These data do not support the use of milrinone to induce chloride secretion in CF airways in vivo.     

Effects of entrainment and agglomeration of particles on combustion of nano-aluminum and water mixtures

The combustion of nano-aluminum and water mixtures is studied theoretically for a particle size of 80 nm and over a pressure range of 1–10 MPa. Emphasis is placed on the effects of entrainment and agglomeration of particles on the burning rate and its dependence on pressure. The flame thickness increases by a factor of ∼10, when particle entrainment is considered. This lowers the conductive heat flux at the ignition front, thereby reducing the burning rate. The pressure dependence of the burning rate is attributed to the changes in the burning time and velocity of particles with pressure. In the diffusion limit, the pressure exponent increases from 0 to 0.5, when the entrainment index increases from 0 to 1.0. A similar trend is observed in the kinetics-controlled regime, although the corresponding value exceeds the diffusion counterpart by 0.5. The kinetics-controlled model significantly over-predicts the burning rate and its pressure exponent, depending on the entrainment index. The present analysis suggests that nano-particles formed closely-packed agglomerates of diameter 3–5 μm, which may burn under diffusion-controlled conditions at high pressures.     

Study of friction welding characteristics of Al/SiC composite and application of grey-based TOPSIS

The present work investigates the possibility of producing friction welded joints with an advanced material like Al/SiC (aluminum–silicon carbide) composite. The study also discloses the multi response optimization in the process of continuous drive friction welding using a hybrid algorithm of grey-based TOPSIS (technique for order of performance by similarity to ideal solution). The friction welding parameters (frictional pressure, upset pressure, burn off length and rotational speed) were optimized considering the multiple performance characteristics such as proof stress, tensile strength, and microhardness. Taguchi’s L₂₇ orthogonal array was used for conducting the welding trials. The confirmation test was conducted at the optimal setting, to sort out the effectiveness of the proposed hybrid algorithm. The macro photographs of the joints and optical micrographs of the weld zone were studied. The scanning electron microscope images of the fractured surface were also examined to identify the failure mode of joints. The significant improvements in the performance characteristics prove the effectiveness of the grey-based TOPSIS method in experimental welding optimization.     

Effect of packing density on flame propagation of nickel-coated aluminum particles

The combustion-wave propagation of nickel-coated aluminum particles is studied theoretically for packing densities in the range of 10–100% of the theoretical maximum density. Emphasis is placed on the effect of packing density on the burning properties. The energy conservation equation is solved numerically and the burning rate is determined by tracking the position of the flame front. Atomic diffusion coefficients and reaction rate of isolated nickel-coated aluminum particles are input parameters to the model. The burning behaviors and combustion wave structures are dictated by the heat transfer from the flame zone to the unburned region. Five different models for the effective thermal conductivity of the mixture are employed. The impact of radiation heat transfer is also assessed. As a specific example, the case with a particle size of 79 μm is considered in detail. The burning rate remains nearly constant (<1 cm/s) up to a packing density of 60%, and then increases sharply toward the maximum value of 11.55 cm/s at a density of 100%. The Maxwell–Eucken–Bruggeman model of thermal conductivity offers the most accurate predictions of the burning rate for all loading densities.     

A provably secure and efficient two‐party password‐based explicit authenticated key exchange protocol resistance to password guessing attacks

Password‐based two‐party authenticated key exchange (2PAKE) protocol enables two or more entities, who only share a low‐entropy password between them, to authenticate each other and establish a high‐entropy secret session key. Recently, Zheng et al. proposed a password‐based 2PAKE protocol based on bilinear pairings and claimed that their protocol is secure against the known security attacks. However, in this paper, we indicate that the protocol of Zheng et al. is insecure against the off‐line password guessing attack, which is a serious threat to such protocols. Consequently, we show that an attacker who obtained the users' password by applying the off‐line password guessing attack can easily obtain the secret session key. In addition, the protocol of Zheng et al. does not provide the forward secrecy of the session key. As a remedy, we also improve the protocol of Zheng et al. and prove the security of our enhanced protocol in the random oracle model. The simulation result shows that the execution time of our 2PAKE protocol is less compared with other existing protocols. Copyright © 2015 John Wiley & Sons, Ltd.     

Restoration of saline greenhouse soil and its effect on crop’s growth through in situ field-scale electrokinetic technology

An in situ electrokinetic (EK) system was designed and applied to highly saline greenhouse soil with a view to investigating the effects of the EK process on growing crops. In situ EK tests in field scale were conducted on the salt accumulated lands in the greenhouse where cabbages and lettuces were being cultivated. A voltage gradient of 0.25–0.6 V cm^?1 was applied for 50 days in the cultivated lands. The changes in the process, viz. current, voltage, and soil temperatures, were monitored. After the EK process, the initial electrical conductivity (EC, 6.0 dS m^?1) of the soil was reduced to about 1.7 dS m^?1 homogeneously below the recommended value (2.5 dS m^?1). The growth rate of cabbages and lettuces under EK treatment was about twice higher than those in the untreated area. The present study revealed that the EK process encourages the growth of the crops considerably and also removes the salts in the soil efficiently during the growth of the crops.     

Inducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses

Soon after it was discovered that intense laser pulses of nanosecond duration from a ruby laser could anneal the lattice of silicon, it was established that this so-called pulsed laser annealing is a thermal process. Although the radiation energy is transferred to the electrons, the electrons transfer their energy to the lattice on the timescale of the excitation. The electrons and the lattice remain in equilibrium and the laser simply 'heats' the solid to the melting temperature within the duration of the laser pulse. For ultrashort laser pulses in the femtosecond regime, however, thermal processes (which take several picoseconds) and equilibrium thermodynamics cannot account for the experimental data. On excitation with femtosecond laser pulses, the electrons and the lattice are driven far out of equilibrium and disordering of the lattice can occur because the interatomic forces are modified due to the excitation of a large (10% or more) fraction of the valence electrons to the conduction band. This review focuses on the nature of the non-thermal transitions in semiconductors under femtosecond laser excitation.