Long-term follow-up of a randomized post-induction therapy trial in acute myelogenous leukemia (a Southeastern Cancer Study Group trial)

A phase III clinical trial was designed to determine if more intensive induction and consolidation therapy for acute myeloblastic leukemia increases the remission rate and prolongs survival. A minor objective was to determine if the use of non-cross resistant drugs was more effective than the same drugs used for induction. Patients with untreated leukemia between the ages of 15 and 50 were given daunorubicin 45 mg/m2 for the first 3 days of a 10-day continuous infusion of cytosine arabinoside, initially at a dose of 2000 mg/m2 but reduced to 100 mg/m2 because of toxicity. Those under 36 achieving a complete remission and with an histocompatible donor were assigned to a transplant arm. The rest were randomized to receive one of three consolidation arms: A, cytosine arabinoside, 200 mg/m2 daily for 7 days and daunorubicin 45 mg/m2 daily for 3 days for three courses; B, one course as in Arm A followed by amsacrine, 120 mg/m2 daily for 5 days followed by a 5-day continuous infusion of azacytidine, 150 mg/m2/day; C, thioguanine and cytosine arabinoside, 100 mg/m2 every 12 h and daunorubicin 10 mg/m2 daily for 5 days for three courses followed by four maintenance courses of cytosine arabinoside, 100 mg/m2 daily for 5 days and daunorubicin, 45 mg/m2 for 2 days every 13 weeks. From 1981 to 1986, 398 eligible patients were enrolled and 219 achieved a complete remission. The initial induction dose of cytosine arabinoside was reduced after five of 29 patients exhibited fatal gastrointestinal toxicity. Only 11 patients were assigned to the transplant arm. There were no significant differences in the consolidation arms. The 5 year disease-free survivals were 38, 31 and 27% in arms A, B, and C respectively. Intensive consolidation therapy with the same or different drugs used in induction was as effective as lower dose consolidation followed by maintenance therapy.     

Deformation and fracture of glass bead/ CTBN-rubber/epoxy composites

Carboxyl-terminated butadiene-acrylonitrile-rubber decreases modulus and yield stress of the studied epoxy but increases fracture toughness. The addition of glass bead compensates for the loss in modulus but has little effect on yield stress. However, it significantly contributes to the fracture toughness by providing additional mechanisms for toughening of both the unmodified and rubber-modified epoxy. For the toughened epoxies studied, fracture surfaces gave only limited information on fracture mechanisms since significant energy absorption also occurs in the material below the fracture surface. Suggestions for suitable material compositions for fiber composite matrices are given.     

Biodegradation of monoaromatic hydrocarbons in aquifer columns amended with hydrogen peroxide and nitrate

The ability of indigenous microorganisms to degrade benzene, toluene, ethylbenzene and xylenes (BTEX) in laboratory scale flow-through aquifer columns was tested separately with hydrogen peroxide (110 mg/l) and nitrate (330 mg/l as NO₃⁻) amendments to air-saturated influent nutrient solution. The continuous removal of individual components from all columns relative to the sterile controls provided evidence for biodegradation. In the presence of hydrogen peroxide, the indigeneous microorganisms degraded benzene and toluene (> 95%), meta- plus para-xylene (80%) and ortho-xylene (70%). Nitrate addition resulted in 90% removal of toluene and 25% removal of ortho-xylene. However, benzene, ethylbenzene, meta- and para-xylene concentrations were not significantly reduced after 42 days of operation. Following this experiment, low dissolved oxygen (< 1 mg/l) conditions were initiated with the nitrate-amended column influent in order to mimic contaminated groundwater conditions distal from a nutrient injection well. Toluene continued to be effectively degraded (> 90%), and more than 25% of the benzene, 40% of the ethylbenzene, 50% of the meta- plus para-xylenes and 60% of the ortho-xylene were removed after several months of operation.     

Optical fiber solitons, their properties and uses

The history and mathematical formulation of solutions are briefly reviewed. Solitons of the nonlinear Schrodinger equation are studied in greater detail because they describe nonlinear pulse propagation on dispersive optical fibers. The proposal by A. Hasegawa and the experiments of L.F. Mollenauer on long distance soliton propagation for use in repeaterless transoceanic fiber transmission cables are described. In 1986, limitations on the distance that can be spanned by a repeaterless link for a given bit rate were shown to exist. It has been shown recently that by proper design these limitations can be overcome, so that newer transoceanic cable designs are likely to utilize solitons. The special properties of solitons make them particularly suited for all optical switching and logic operations. Some recent experiments with such switches are described     

Modeling and analysis of vias in multilayered integrated circuits

A method for modeling and analyzing vias the multilayered integrated circuits is presented. The model is based on microwave network theory. The whole via structure is divided into cascaded subnetworks, including a vertical via passing through different layers and transitions from the microstrip line and/or striplines to the vertical via. The parameters of each subnetwork are obtained from electromagnetic field analysis. Numerical results in the frequency domain and the time domain are presented. Validation of the model has been carried out by both measurements and finite-difference-time-domain (FDTD) modeling. The results show good agreement with the measurements in the frequency range for which the components of the experimental model are within specification. The time domain simulation results also agree well with the FDTD results     

Comment and discussion on digital processing of PD pulses

Some of the more salient aspects of the digital processing technology of PD signals are examined. Most of the efforts in this field are concentrated on the application of digital analyzers for pulse height analysis, pattern recognition and identification of the physical phenomena. It is demonstrated that errors in the signal processing unit can lead to dominant mistakes in the interpretation of the test results     

A comparison of two conformal methods for FDTD modeling

Two conformal finite-difference time-domain (FDTD) methods are considered, the contour path (CPFDTD) method of Jurgens et al. (see IEEE Trans. Antennas Propagat., vol.40, p.357, 1992) and the overlapping grid (OGFDTD) method of Yee et al. (see IEEE Trans. Antennas Propagat., vol.40, p.1068, 1992). Both TE and TM scattering from a two-dimensional (2-D), perfectly conducting circular cylinder are used to test the accuracy of the methods for curved surfaces. Also, TE and TM scattering from a 2-D, perfectly-conducting rotated square cylinder are used to test the accuracy for corners and edges. It is shown that the conformal method proposed by Yee et al. provide significant improvement in accuracy over the original FDTD algorithm for most of the geometries studied. However, implementation becomes more difficult as the geometries become more complex. The conformal method proposed by Jurgens et al. provide significant improvement in accuracy as well for most of the geometries studied. However, improvement does not occur for the TM case when the square cylinder is not aligned properly with the grid. Implementation of the CPFDTD method is relatively straightforward. For the majority of the cases studied, the OGFDTD method is more accurate than the CPFDTD method     

Sequence capture-PCR improves detection of mycobacterial DNA in clinical specimens

The rapid identification of mycobacterial DNA in clinical samples by PCR can be useful in the diagnosis of tuberculous infections, but several large studies have found that the sensitivity of this approach is not better than that of culture. In order to improve the sensitivity of detection of mycobacterial DNA in clinical specimens from patients with paucibacillary forms of tuberculosis, we have developed a procedure permitting the specific capture of mycobacterial DNA in crude samples prior to amplification, thereby concentrating the target sequences and removing irrelevant DNA and other potential inhibitors of the amplification reaction (sequence capture-PCR). By using this approach to capture and amplify two different sequences specific for organisms of the Mycobacterium tuberculosis complex (IS6110 and the direct repeat region), it was possible to detect as little as one genome of mycobacterial DNA in samples containing up to 750 micrograms of total DNA, representing a 10- to 100-fold increase in sensitivity compared with that obtained by purifying total DNA prior to amplification. Detection of the IS6110 sequence in pleural fluid samples from patients with tuberculous pleurisy by sequence capture-PCR gave positive results in 13 of 17 cases, including 3 of 3 culture-positive samples and 10 of 14 culture-negative samples. In contrast, when total DNA was purified from these samples by adsorption to a silica matrix prior to amplification, only the three culture-positive samples were positive by PCR. The sensitivity of detection of the direct repeat sequence in these samples by sequence capture-PCR was similar to that of IS6110 and, in addition, permitted immediate typing of the strains from some patients. We conclude that sequence capture-PCR improves the sensitivity of detection of mycobacterial DNA in paucibacillary samples. This approach should be useful in detecting rare target sequences from organisms implicated in other pathologic processes.     

Direct and indirect assessment of skeletal muscle blood flow in patients with congestive heart failure

Techniques which are currently used to measure skeletal muscle blood flow (SMBF) in patients with congestive heart failure (CHF) are neither convenient nor accurate. They have led to discrepant results in patients with congestive heart failure and are, in part, responsible for the ongoing debate regarding the factors which limit the rise in body oxygen consumption during exercise in these patients. However, direct measurement of SMBF may not be needed during exercise in patients with severe CHF. Their skeletal muscles maximally extract oxygen. Consequently, increase in oxygen consumption by the skeletal muscles is only mediated by a concomitant increase in SMBF. In patients with severe CHF, peak body oxygen consumption attained during maximal exercise closely depends on the rise in SMBF, and thus provides an indirect measurement of SMBF.