Multipulse operation of a high average power, good beam qualityzig-zag dye laser

A laser pumped zig-zag dye laser operating at 568 nm with a pulse length ~2 μs has been sealed to high power using a MOPA configuration. Pulse energies in excess of 7 J with beam quality <2 XDL have been achieved under repetitively pulsed, 10 Hz operation. RMS jitter was measured as 0.12 of a 1 XDL spot. The device has operated with over 70 W output for runs up to 5 s. Substantially longer run times and output powers are possible. This device represents an advance in dye laser capabilities. Improvement in pointing accuracy of better than an order of magnitude have been demonstrated. In addition, an improvement in beam quality by about an order of magnitude has been achieved compared to other dye lasers operating in this power range     

Accurate determination of magnetic field gradients from four pointvector measurements. I. Use of natural constraints on vector dataobtained from a single spinning spacecraft

Cluster introduces a new generation of spacecraft that will measure the spatial gradients of the magnetic field in the Earth's magnetosphere. As gradients require knowledge of differences, small errors resulting from an inadequate knowledge of the orientations, zero levels and the scale factors of the magnetometer sensors affect the calculation of field gradients disproportionately and must be removed with high accuracy. We show that twelve calibration parameters are required for each of the spacecraft (for a total of 48 for the four spacecraft) to correctly infer the measured magnetic fields at each of the spacecraft. By application of a Fourier transform technique, some of the parameters can be recovered. We show that errors in eight of the twelve calibration parameters generate coherent monochromatic signals at the first and the second harmonics of the spin frequency in the despun data. We relate the real and the imaginary parts of the monochromatic signals to the eight calibration parameters. We then present a least squares scheme that improves the eight calibration parameters by iteration until the power of the coherent signal superimposed above the broad-band background is minimized     

The Effect of Organic Ligands on the Rate of Loss of Phenylmercuric Nitrate into Rubber Closures and Plastic Containers

The effect of the presence of various organic compounds containing a variety of functional groups on the rate of loss of phenylmericuric (PM) nitrate into plastic containers and rubber closures has been investigated. The presence of organic compounds profoundly influenced the loss of the phenylmercuric nitrate, that loss being dependent upon their chemical structure and concentration. This effect explains the unpredictability of the loss of PM nitrate into polymer matrices from pharmaceutical products.     

Cutoff frequencies and noise power law model of spectral density:adaptation of the multivariance method for irregularly spaced timingdata using the lowest-mode estimator approach

The concept of structure functions, which is an extension of the variance approach, is useful to determine the variance (the structure function) which is optimized for a type of noise and for an order of drift. The multivariance method was developed to use different variances over the same signal. It is then possible to select a set of variances in which each variance is optimized to the determination of one parameter (of one noise level, drift, or cutoff frequency). Recently, we adapted this method to irregularly spaced timing data. In this connection, we replaced the structure functions by another method of spectral density estimation: the lowest-mode estimator, introduced by J.E. Deeter and P.E. Boynton (1982, 1984) for the analysis of pulsar timing data. Different lowest-mode estimators can be constructed according to two priorities: the order of drifts that must be removed and the type of noise for which the sensitivity must be maximum. Thus, a multivariance system is developed using a set of different estimators. The details of this method are described, and the results for different signals are discussed in this paper     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

Subspace-based signal analysis using singular value decomposition

A unified approach is presented to the related problems of recovering signal parameters from noisy observations and identifying linear system model parameters from observed input/output signals, both using singular value decomposition (SVD) techniques. Both known and new SVD-based identification methods are classified in a subspace-oriented scheme. The SVD of a matrix constructed from the observed signal data provides the key step in a robust discrimination between desired signals and disturbing signals in terms of signal and noise subspaces. The methods that are presented are distinguished by the way in which the subspaces are determined and how the signal or system model parameters are extracted from these subspaces. Typical examples, such as the direction-of-arrival problem and system identification from input/output measurements, are elaborated upon, and some extensions to time-varying systems are given     

Structural characterization of the cyanelle peptidoglycan of Cyanophora paradoxa by 252Cf plasma desorption mass spectrometry and fast atom bombardment/tandem mass spectrometry

A strategy for the structural characterization of the four major NaBH4-reduced peptidoglycan monomers derived from muramidase-digested peptidoglycan from the cyanelles of the flagellate Cyanophora paradoxa Korschikoff is described. Initial molecular weight determination of these glycopeptides was performed by positive and negative ion plasma desorption mass spectrometry. Due to the presence of two pairs of disaccharide tripeptide and disaccharide tetrapeptide monomers differing in mass by 112 units, respectively, an as yet unknown peptidoglycan modification either at the carbohydrate or at the peptide moiety was assumed. beta-Elimination of the disaccharide unit from the unreduced peptidoglycan monomers yielded the corresponding (modified) N1-lactyltripeptides and -tetrapeptides, respectively. These peptides, N-terminally blocked with lactic acid, unambiguously showed the modification to be located on the peptide moiety. By positive ion fast atom bombardment/hybrid tandem mass spectrometry of the reduced peptidoglycan monomers as well as of the corresponding deglycosylated monomers (= N1-lactylpeptides) the modification was determined to be linked to the glutamic acid moiety. Based on combined data from plasma desorption mass spectrometry, tandem mass spectrometry, accurate mass measurement and amino acid analysis of the acid hydrolysate after derivatization with o-phthaldialdehyde by high-performance liquid chromatography we could establish the structure of the modification as N-acetylputrescine. Finally, the confirmation of the linkage of the glutamic acid to diaminopimelic acid via the gamma-COOH was based on the presence of a-type peptide backbone fragment ions in the positive ion plasma desorption mass spectra of the modified N1-lactylpeptides.     

Activating mutations of the Gs alpha-gene in nonfunctioning pituitary tumors

The majority of pituitary tumors are of monoclonal origin; however, the molecular basis for their formation is poorly understood. Somatic mutations in the alpha-subunit of the GTP-binding protein, Gs alpha (gsp oncogene) have been found in about one third of GH-secreting tumors. Mutations in another alpha-subunit of a GTP-binding protein, Gi2 alpha (gip mutations) have been described in other endocrine tumors. In this study, we examined 21 nonfunctioning pituitary tumors and 4 macroprolactinomas for gsp mutations and 27 nonfunctioning tumors and 4 macroprolactinomas for gip mutations. Using the polymerase chain reaction and denaturing gradient gel electrophoresis, 2 nonfunctioning pituitary tumors displayed migration abnormalities when the Gs alpha-gene was analyzed. Sequence analysis of these abnormally migrating polymerase chain reaction products revealed two previously known gsp mutations: arginine at codon 201 altered to cysteine, and glutamine at codon 227 changed to leucine. No gip mutations could be demonstrated. These findings emphasize the monoclonal origin of nonfunctioning pituitary tumors and suggest that cAMP may play a role in tumorigenesis of nonfunctioning pituitary tumors.