Circuit techniques for large CSEA SRAMs

The CMOS-storage emitter-access (CSEA) memory cell offers faster access than the MOS cells used in conventional BiCMOS SRAMs but using it in large memory arrays poses several problems. Novel BiCMOS circuit approaches to address the problems of decoding power, electronic noise, level translation, and write disturbance are described. Results on a 64-kb CSEA SRAM using these techniques are reported. The device, fabricated in an 0.8-μm BiCMOS technology, achieves read access and write pulse time of less than 4 ns while dissipating 1.7 W at a case temperature of 70°C     

RbCl:Li color center laser with laser diode pumping

CW operation of a RbCl:Li-F_A(II) laser has been obtained under pumping by a red laser diode. Pump power at threshold is 90 mW. Single frequency operation of the color center laser has been achieved. The intensity noise generated by two pump sources (laser diode and Kr-ion laser) is compared     

Creep in polyethylene and hydroxyapatite reinforced polyethylene composites

Isochronous stress-strain relationships and long term creep performance for unfilled and hydroxyapatite filled polyethylene composites have been studied. The tests were carried out in a buffered (pH=7.5) Ringer's solution at 37°C. It was observed that the inclusion of hydroxyapatite does not remove the non-linear viscoelasticity of polyethylene. The creep resistance is found to increase with increase in volume fraction of hydroxyapatite. The creep failure of composites at long times can occur due to debonding of the interface.     

Influence of the Temperature of a Body on Its Weight

The physical preconditions are considered for the temperature of a body to influence the force of gravity experienced by it. The results are given of experiments on weighing metal rods heated by ultrasound which confirm a dependence of the weight of the rods on their temperature.     

Effect of exponentially graded base doping on the performance ofGaAs/AlGaAs heterojunction bipolar transistors

The authors have fabricated n-p-n GaAs/AlGaAs heterojunction bipolar transistors (HBTs) with base doping graded exponentially from 5×10¹⁹ cm^-3 at the emitter edge to 5×10¹⁸ cm^-3 at the collector edge. The built-in field due to the exponentially graded doping profile significantly reduces base transit time, despite bandgap narrowing associated with high base doping. Compared to devices with the same base thickness and uniform base doping of 1×10¹⁹ cm^-3 , the cutoff frequency is increased from 22 to 31 GHz and maximum frequency of oscillation is increased from 40 to 58 GHz. Exponentially graded base doping also results ill consistently higher common-emitter current gain than uniform base doping, even though the Gummel number is twice as high and the base resistance is reduced by 40%     

A radix-8 wafer scale FFT processor

Wafer Scale Integration promises radical improvements in the performance of digital signal processing systems. This paper describes the design of a radix-8 systolic (pipeline) fast Fourier transform processor for implementation with wafer scale integration. By the use of the radix-8 FFT butterfly wafer that is currently under development, continuous data rates of 160 MSPS are anticipated for FFTs of up to 4096 points with 16-bit fixed point data.     

Reversible or irreversible modification of [3H]PAF binding on rabbit platelet membranes differentiates various PAF receptor antagonists

[³H]Platelet-activating factor (PAF) binding to rabbit platelet membranes was examined before and after 20 min preincubation at 25°C in the presence of PAF, lysoPAF, or of five different PAF receptor antagonists (L 652731, BN 52021, WEB 2086, BN 52111 and BN 52115). When platelet membranes were not washed after preincubation with PAF or PAF antagonists, no significant specific binding of [³H]PAF was observed, which suggests full occupancy of the binding sites. When membranes were extensively washed, full recovery of specific [³H]PAF binding was attained with L 652731 and partial recoveries (60%, 55% and 30%) were reached with BN52021, WEB 2086 and PAF, respectively; no recovery was seen with the dioxolanes BN 52111 and BN 52115. Scatchard analysis of the binding data indicated that no significant change in the dissociation constant (K_d) and maximum number of binding sites (B_max) occurred after preincubation of platelet membrane with L 652731, whereas a reduction of B_max was observed when PAF and BN 52021 were measured. When platelet membranes were preincubated with WEB 2086, B_max and K_d significantly increased. The data suggest differing binding properties for PAF and the PAF antagonists. Some of the PAF antagonists may tightly bind to the PAF receptor site(s) and/or irreversibly modify or downregulate PAF recognition sites. Our results also suggest that the interaction of PAF receptor antagonists with PAF receptor can be divided into at least two components, namely a reversible component and an irreversible one. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Two-electrode DFB laser filter used as a wide tunable narrow-bandFM receiver: tuning analysis, characteristics and experimental FSK-WDMsystem

Characteristics of a two-electrode DFB laser filter are studied both theoretically and experimentally. Using a matrix analysis of spontaneous emission, a continuous tuning range of 6.7 Å is achieved by changing both net field gains of the two electrodes. A total discontinuous tuning range of over 10 nm comprising alternating mode jumps and continuous tuning range of 4 Å are measured experimentally. The laser filter presents a FWHM bandwidth of 5 GHz which depends on the optical input power. In addition, it is demonstrated that a DFB laser filter can act as a frequency discriminator/photodetector, i.e., a narrow-band FM receiver, with a uniform bandwidth of 1.5 GHz. Using the two-electrode DFB laser for both transmitter and receiver, a two-channel FSK-WDM transmission system utilizing the discontinuous tuning range is reported. The advantage of such a device is the simplicity as compared to the heterodyne technique     

Multiple drafts and legal liability: a hazard for professionalwriters

The overall legal significance of multiple drafts of professional communications is discussed. In particular, some of the legal principles that govern the status of written documents, such as the applicable rules of court are reviewed, and the types of litigation in which previous drafts can figure prominently are examined. The possibility of multiple draft liability in light of the current emphasis on writing as a process, with writers encouraged to turn off the editorial sides of their brains during the early stages of composing, is considered     

Development of temperature-heating rate diagrams for the pyrolytic removal of binder used for powder injection moulding

A polypropylene-based binder system was used to injection mould test bars containing 65 vol% aluminium powder. Specimens, 3 and 6 mm thick, made from these bars were used for pyrolytic binder removal experiments in static air and nitrogen. The development of a carefully defined experimental procedure for the determination of the heating rate at which binder removal can be carried out at a given temperature without the creation of macro defects is fully described. The use of isothermal heat treatments during pyrolysis are also considered and results are presented as temperature-heating rate diagrams for each atmosphere and thickness investigated. These diagrams show a lower and an upper boundary. Defect formation occurs if the temperature-heating rate relationship lies between the boundaries. Near optimum binder removal schedules deduced from each diagram have been experimentally verified.