Processing and fracture behaviour of hot pressed silicon carbide whisker reinforced alumina

The improvement of mechanical properties of silicon carbide whisker reinforced alumina has been investigated with emphasis on the effects of the whisker type and content, the hot pressing temperature and the influence of an interfacial film between the whisker and the matrix. The introduction of silicon carbide whiskers significantly improves the fracture toughness, flexural strength and creep resistance of polycrystalline alumina.

However, these properties are strongly dependent on the size and morphology of whiskers. Large diameter whiskers generate extensive micro-cracking which leads to a decrease in flexural strength. Also, the presence of carbon-coated SiC whiskers substantially increases the high temperature strain rate by promoting cavitation. A grain boundary glassy phase introduced by the carbon coating was also detected.     

Note: Temperature derivative of the refractive index of binary mixtures measured by using a new thermodiffusion cell

A thermodiffusion cell is developed for performing Soret experiments on binary mixtures at high pressure and in the presence of a porous medium. The cell is validated by performing experiments at atmospheric pressure. The experiments are performed by applying different temperature gradients to binary mixtures in order to determine their thermal contrast factor. These measurements provide a first demonstration of the good reproducibility of this kind of measurements upon calibration.     

Visual tracking for the recovery of multiple interacting plant root systems from X-ray $$\upmu $$CT images

We propose a visual object tracking framework for the extraction of multiple interacting plant root systems from three-dimensional X-ray micro computed tomography images of plants grown in soil. Our method is based on a level set framework guided by a greyscale intensity distribution model to identify object boundaries in image cross-sections. Root objects are followed through the data volume, while updating the tracker’s appearance models to adapt to changing intensity values. In the presence of multiple root systems, multiple trackers can be used, but need to distinguish target objects from one another in order to correctly associate roots with their originating plants. Since root objects are expected to exhibit similar greyscale intensity distributions, shape information is used to constrain the evolving level set interfaces in order to lock trackers to their correct targets. The proposed method is tested on root systems of wheat plants grown in soil.     

INTAMAP: The design and implementation of an interoperable automated interpolation web service

INTAMAP is a Web Processing Service for the automatic spatial interpolation of measured point data. Requirements were (i) using open standards for spatial data such as developed in the context of the Open Geospatial Consortium (OGC), (ii) using a suitable environment for statistical modelling and computation, and (iii) producing an integrated, open source solution. The system couples an open-source Web Processing Service (developed by 52°North), accepting data in the form of standardised XML documents (conforming to the OGC Observations and Measurements standard) with a computing back-end realised in the R statistical environment. The probability distribution of interpolation errors is encoded with UncertML, a markup language designed to encode uncertain data. Automatic interpolation needs to be useful for a wide range of applications and the algorithms have been designed to cope with anisotropy, extreme values, and data with known error distributions. Besides a fully automatic mode, the system can be used with different levels of user control over the interpolation process.     

Reconstructing (h,v)-convex 2-dimensional patterns of objects from approximate horizontal and vertical projections

The problem of reconstructing a pattern of an object from its approximate discrete orthogonal projections in a 2-dimensional grid, may have no solution because the inaccuracy in the measurements of the projections may generate an inconsistent problem. To attempt to overcome this difficulty, one seeks to reconstruct a pattern with projection values having possibly some bounded differences with the given projection values and minimizing the sum of the absolute differences.

This paper addresses the problem of reconstructing a pattern with a difference at most equal to +1 or −1 between each of its projection values and the corresponding given projection value. We deal with the case of patterns which have to be horizontally and vertically convex and the case of patterns which have to be moreover connected, the so-called convex polyominoes. We show that in both cases, the problem of reconstructing a pattern can be transformed into a Satisfiability (SAT) Problem. This is done in order to take advantage of the recent advances in the design of solvers for the SAT Problem. We show, experimentally, that by adding two important features to CSAT (an efficient SAT solver), optimal patterns can be found if there exist feasible ones. These two features are: first, a method that extracts in linear time an optimal pattern from a set of feasible patterns grouped in a generic pattern (obtaining a generic pattern may be exponential in the worst case) and second, a method that computes actively a lower bound of the sum of absolute differences that can be obtained from a partially defined pattern. This allows to prune the search tree if this lower bound exceeds the best sum of absolute differences found so far.     

Analysis of fluid lubrication mechanisms in metal forming at mesoscopic scale

The lubricant entrapment and escape phenomena in metal forming are studied experimentally as well as numerically. Experiments are carried out in strip reduction of aluminium sheet applying a transparent die to study the fluid flow between mesoscopic cavities. The numerical analysis involves two computation steps. The first one is a fully coupled fluid-structure Finite Element computation, where pockets in the surface are plastically deformed leading to the pressurization of the entrapped fluid. The second step computes the fluid exchange between cavities through the plateaus of asperity contacts with the plane tool, one cavity at a time.     

Influence of Unmodified and β-Glycerophosphate Cross-Linked Chitosan on Anti-Candida Activity of Clotrimazole in Semi-Solid Delivery Systems

The combination of an antifungal agent and drug carrier with adjunctive antimicrobial properties represents novel strategy of complex therapy in pharmaceutical technology. The goal of this study was to investigate the unmodified and ion cross-linked chitosan’s influence on anti-Candida activity of clotrimazole used as a model drug in hydrogels. It was particularly crucial to explore whether the chitosans’ structure modification by β-glycerophosphate altered its antifungal properties. Antifungal studies (performed by plate diffusion method according to CLSI reference protocol) revealed that hydrogels obtained with chitosan/β-glycerophosphate displayed lower anti-Candida effect, probably as a result of weakened polycationic properties of chitosan in the presence of ion cross-linker. Designed chitosan hydrogels with clotrimazole were found to be more efficient against tested Candida strains and showed more favorable drug release profile compared to commercially available product. These observations indicate that novel chitosan formulations may be considered as promising semi-solid delivery system of clotrimazole.     

Spatiotemporal evolution of the El Biar landslide (Algiers): new field observation data constrained by ground-penetrating radar investigations

Bulletin of Engineering Geology and the Environment - A better understanding of the spatiotemporal evolution of landslides in urban zones is a key factor in assessing the risk of future slides...