Prediction of mill load in hot strip mill rolling

It has been ascertained whether or not the model capable of predicting the stress-strain relation of plain carbon steels, previously proposed, is applicable to the estimation of mill loads in the finishing process (consisting of six mill stands) of a hot strip mill. An appreciably good agreement with the predicted and measured mill load values has been obtained in the earlier passes where the strip microstructure is regarded to have completed static recrystallization, and the predicted mill loads in the later passes have been far less than the measured load owing to the effect of the strain accumulated in the previous rolling process. Then, a simple model to predict the accumulated strain has been constructed and introduced into the calculation of mill loads. As a result, the predicted mill loads have been fairly improved over the whole passes in the finishing process.     

Isolation and amino acid sequences of two Kunitz-type protease inhibitors from the sea anemone Anthopleura aff. xanthogrammica

We have isolated a novel retina-specific gene, retinal fascin, encoding a new member of actin-bundling protein gene family, from a bovine retina cDNA library. The cDNA encodes a 492 amino acid protein which shows 36-57% amino acid identity with three vertebrate fascins, echinoid fascin and Drosophila singed gene. Northern blot analysis revealed that retinal fascin mRNA was exclusively expressed in the eye and not seen in other tissues examined. In situ hybridization analysis indicated that retinal fascin mRNA signals were found only in the inner segment of the photoreceptor layer and outer nuclear layer, indicating that retinal fascin was specifically expressed in photoreceptor cells. As fascins are actin-bundling proteins important for constructing several intracellular structures, retinal fascin might play a pivotal role in photoreceptor cell-specific events, such as disk morphogenesis.     

Rapid manufacturing of metal components by laser forming

This overview will focus on the direct fabrication of metal components by using laser-forming techniques in a layer-by-layer fashion. The main driving force of rapid prototyping (RP) or layer manufacturing techniques changed from fabrication of prototypes to rapid tooling (RT) and rapid manufacturing (RM). Nowadays, the direct fabrication of functional or structural end-use products made by layer manufacturing methods, i.e. RM, is the main trend. The present paper reports on the various research efforts deployed in the past decade or so towards the manufacture of metal components by different laser processing methods (e.g. selective laser sintering, selective laser melting and 3-D laser cladding) and different commercial machines (e.g. Sinterstation, EOSINT, TrumaForm, MCP, LUMEX 25, Lasform). The materials and applications suitable to RM of metal parts by these techniques are also discussed.     

Internal oxidation of Fe-Al alloys in the α-phase region

The internal oxidation behavior of Fe-0.069, 0.158, and 0.274 wt% Al alloys was investigated in the -phase region. The internal oxidation experiments have been made over the temperature range from 1023 to 1123 K using a mixture of iron and its oxide powders. A parabolic rate law holds in the present alloys, where the rate constant, K_p, depends upon the oxidation temperature as well as the aluminum content. The internal oxidation of Fe-Al alloys is, therefore, controlled by a diffusion process of oxygen in the alloy. The oxide formed in the oxidation layer is the stoichiometric FeAl₂O₄ (hercynite). The aluminum concentration, N _Al ^Io , in the oxidation layer was calculated by taking account of counterdiffusion of aluminum. Furthermore, the oxygen concentration, N _O ^S , at the specimen surface was evaluated on the basis of thermodynamics. Using these estimated values of K_p, N _Al ^IO , and N _O ^S , the diffusion coefficient of oxygen, D _O ^IO , in the oxidation layer, where the oxide particles were dispersed, was also calculated. D _O ^IO increases as the volume fraction of the oxide, f^IO, increases. The diffusion coefficient of oxygen, D_O, in -iron was determined by extrapolating D _O ^IO to f^IO=0.     

Encrypted Thermal Printing with Regionalization Transformation

Artificially structured thermal metamaterials provide an unprecedented possibility of molding heat flow that is drastically distinct from the conventional heat diffusion in naturally conductive materials. The Laplacian nature of heat conduction makes the transformation thermotics, as a design principle for thermal metadevices, compatible with transformation optics. Various functional thermal devices, such as thermal cloaks, concentrators, and rotators, have been successfully demonstrated. How far can it possible go beyond just realizing a heat‐distribution function in a thermal metadevice? Herein, the concept of encrypted thermal printing is proposed and experimentally validated, which could conceal encrypted information under natural light and present static or dynamic messages in an infrared image. Regionalization transformation is developed for structuring thermal metamaterial‐strokes as infrared signatures, enabling letters of the alphabet to be written, paintings to be drawn, movies to be made, and information to be displayed. This strategy successfully demonstrates an extreme level of manipulation of heat flow for encryption, illusions, and messaging.     

Do people with social anxiety feel anxious about interacting with a robot?

AI & SOCIETY - To investigate whether people with social anxiety have less actual and “anticipatory” anxiety when interacting with a robot compared to interacting with a person, we...     

Fluorescent imaging of endothelial glycocalyx layer with wheat germ agglutinin using intravital microscopy

Endothelial glycocalyx (GCX) is located on the apical surface of vascular endothelial cells and is composed of a negatively‐charged network of proteoglycans and glycoproteins. The GCX plays an important role in maintaining the integrity of vascular walls and preventing leakage of plasma. Therefore, degradation of the GCX is believed to lead to pathological leakage of plasma. Because the GCX is a very thin layer, its ultrastructural image has been demonstrated on electron microscope. To explore the function of the GCX, it should be visualized by a microscope in vivo. Thus, we developed in vivo visualization technique of the GCX under fluorescence microscopy using a mouse dorsal skinfold chamber (DSC) model. To label and visualize the GCX, we used fluorescein isothiocyanate (FITC)‐labeled lectin, which has a high specificity for sugar moieties. We examined the affinity of the different lectins to epivascular regions under an intravital fluorescent microscope. Among seven different lectins we examined, FITC labeled Triticum vulgaris (wheat germ) agglutinin (WGA) delineated the GCX most clearly. Binding of WGA to the GCX was inhibited by chitin hydrolysate, which contained WGA‐binding polysaccharide chains. Furthermore, the septic condition attenuated this structure, suggesting structural degradation of endothelial GCX layer. In conclusion, FITC‐labeled WGA lectin enabled visualization of endothelial GCX under in vivo fluorescence microscopy. Microsc. Res. Tech. 79:31–37, 2016. © 2015 Wiley Periodicals, Inc.     

Numerical study on dynamic behavior of slope models including weak layers from deformation to failure using material point method

This paper describes numerical studies on the dynamic behavior of experimental slope models, including various inclined weak layers. These studies were conducted by simulation of shaking table tests using the material point method (MPM), which allows seamless treatment of various considerations, from elastic behavior to discontinuous collapse behavior of slopes, on the basis of an elasto-plastic constitutive law. The simulation results showed that the failure modes, progressive deformation and downward sliding of the numerical slope models, which were similar to that observed in the shaking table tests, can be obtained using the numerical method. In addition, sensitivity analyses of the numerical models used in this study were performed to determine the effects of mesh size, number of particles per cell (PPC) and damping constants on the simulation results. The results of these analyses indicated the use of fine meshes and high damping constants seems to produce sensible results and reduce numerical noises, respectively.     

α-Amylase immobilization capacities of mesoporous silicas with different morphologies and surface properties

α-Amylase was encapsulated in several mesoporous materials (folded sheet mesoporous silica (FSM), cubic mesoporous silica (KIT-6), and two-dimensional hexagonal mesoporous silica (SBA-15)) that differed morphologically in terms of particle shape, pore size, and pore structure. The encapsulation capacity and thermal stability of encapsulated α-amylase were examined. The amount of α-amylase encapsulated increased with increasing pore size in the following order: SBA-15 < KIT-6 < FSM. Nitrogen adsorption experiments were performed before and after α-amylase encapsulation in mesoporous silicas with pore sizes larger than the size of α-amylase, confirming that α-amylase was encapsulated in the pores. Among mesoporous silicas with similar pore sizes, FSM was found to have the highest capacity for α-amylase encapsulation both per weight and per surface area of silica. Furthermore, α-amylase encapsulated in FSM demonstrated high thermal stability at 90 °C relative to the thermal stability of free α-amylase or free α-amylase encapsulated in other mesoporous silicas. Zeta potential measurements showed that the FSM surface had an isoelectric point that was lower than that of other mesoporous silicas, and hydrophilicity measurements showed that its surface was more hydrophilic. The surface properties of FSM contributed to the high thermal stability of the α-amylase encapsulated within the pores.