Thermal,mechanical, and barrier properties of polyethylene/surlyn/organoclay nanocomposites blown films prepared by different mixing methods

(Low‐density polyethylene) (LDPE)/clay nanocomposites were prepared by melt blending in a twin‐screw extruder by using different mixing methods. Zinc‐neutralized carboxylate ionomer was used as a compatibilizer. Blown films of the nanocomposites were then prepared. The effect of mixing method on the clay dispersion and properties of the nanocomposites was evaluated by wide‐angle X‐ray diffraction analysis, mechanical properties, thermal properties, and barrier properties. The structure and properties of nanocomposites containing different amounts of nanoclay prepared by selected mixing techniques were also investigated. It was found that melt compounding of Surlyn/clay masterbatch with pure LDPE and Surlyn (two‐step‐a method) results in better dispersion and intercalation of the nanofillers than melt mixing of LDPE/Surlyn/clay masterbatch with pure LDPE and surlyn (two‐step‐b method) and direct mixing of LDPE with clay. The films containing ionomer have good barrier properties. A wide‐angle X‐ray diffraction pattern indicates that intercalation of polymer chains into the clay galleries decreases by increasing the clay content. Barrier properties and tensile modulus of the films were improved by increasing the clay content. In addition, tensile strength increased in the machine direction, but it decreased in the transverse direction by increasing the clay content. DSC results showed that increasing the clay content does not show significant change in the melting and crystallization temperatures. The results of thermogravimetric analysis showed that the thermal stability of the nanocomposites decreased by increasing the clay content more than 1 wt%. J. VINYL ADDIT. TECHNOL., 21:60–69, 2015. © 2014 Society of Plastics Engineers     

Studies on urethane‐modified alumina‐filled polyesteramide anticorrosive coatings cured at ambient temperature

Coatings prepared from polyesteramide resin synthesized from linseed oil, a renewable resource, have been found to show improved physicomechanical and anticorrosive characteristics. These properties are further improved when aluminum is incorporated in the polyesteramide resin. The coatings of this resin are generally obtained by baking at elevated temperatures. With a view toward the use of linseed oil, as a precursor for the synthesis of polyesteramide resins and to cure their coatings at ambient temperature, toluylene diisocyanate (TDI) was incorporated into polyesteramide and alumina‐filled polyesteramide in varying proportions to obtain urethane‐modified resins. The latter resins were found to cure at room temperature. The broad structural features of the urethane‐modified polyesteramide and alumina‐filled polyesteramide were confirmed by FTIR and ¹H–NMR spectroscopies. Scratch hardness; impact resistance; bending resistance; specular gloss; and resistance to acid, alkali, and organic solvents of the coatings of these resins were determined by standard methods. Physicomechanical and anticorrosive properties, specular gloss, and thermal stability of the urethane‐modified alumina‐filled polyesteramide coatings were found to be at higher levels among these resins. It was found that TDI could be incorporated in polyesteramide up to only 6 wt %, such that above this loading its properties started to deteriorate, whereas alumina‐filled polyesteramide could take up to 10 wt % TDI. Explanation is provided for the increase in scratch hardness and impact resistance above 6 and 10 wt % addition of TDI in polyesteramide and alumina‐filled polyesteramide, respectively, as well as for the decrease in flexibility and resistance to solvents, acid, and alkali of coatings of these resins above these limits of TDI addition. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 1855–1865, 2001     

Differences in the Relative Abundance of ProBDNF and Mature BDNF in A549 and H1299 Human Lung Cancer Cell Media

Brain-derived neurotrophic factor (BDNF), a member of the neurotrophin family, has been linked to several human malignancies and shown to promote tumorigenesis. The purpose of this study was to explore the relative abundance of pro-brain-derived neurotrophic factor (proBDNF) and mature BDNF (mBDNF) in A549 (p53 wild-type) and H1299 (p53-null) lung cancer cell media. Higher levels of proBDNF were detected in the media of A549 cells than in H1299 cell media. Using inhibitors, we found that the levels of proBDNF and mBDNF in the media are likely regulated by PI3K, AKT, and NFκB. However, the largest change in these levels resulted from MMP2/9 inhibition. Blocking p53 function in A549 cells resulted in increased mBDNF and decreased proBDNF, suggesting a role for p53 in regulating these levels. The ratio of proBDNF/mBDNF was not affected by MMP2 knockdown but increased in the media of both cell lines upon knockdown of MMP9. Downregulation of either MMP2 or MMP9 by siRNA showed that MMP9 siRNA treatment of either A549 or H1299 cells resulted in decreased cell viability and increased apoptosis, an effect diminished upon the same treatment with proBDNF immunodepleted media, suggesting that MMP9 regulates the cytotoxic effects induced by proBDNF in lung cancer cells.     

Dielectric,ferroelectric, and energy storage properties in dysprosium doped sodium bismuth titanate ceramics

In this work, Na_0.5(Bi_1-xDy_x)_0.5TiO₃ (0?≤?x?≤?15%) ceramics were prepared via solid state reaction method and were characterized. A stable and pure perovskite phase was revealed by X-ray diffraction analysis for all compositions and a symmetry change from rhombohedral to orthorhombic phase was detected beyond 10% of Dy substitution. The incorporation of Dy³⁺ into Sodium Bismuth Titanate (Na_0.5Bi_0.5TiO₃) matrix allows a substantial decrease of the coercive field, an increase in the resistivity, and leads to a high stability of the dielectric permittivity (??/?_(150?°C) ≤?±?15%) over a wide temperature range. Furthermore, this system was found to exhibit improved energy storage properties at high temperatures with a maximum energy density of 1.2?J/cm³ obtained for 2%Dy composition at 200?°C. The obtained results are very promising for energy storage capacitors operating at high temperatures.     

Electrochemical investigations of pitting corrosion behaviour of type UNS S31603 stainless steel in thiosulfate-chloride environment

The pitting corrosion behaviour of type UNS S31603 stainless steel (316L SS) in 0.01, 0.05 and 0.1 M thiosulfate ion (S₂O₃ ^2–) in the absence and presence of various concentrations of chloride ion (Cl^–) was studied using the cyclic potentiodynamic polarization method. The influence of major factors which affect pitting corrosion such as pH and temperature, were also investigated. It was found that both the pitting potential (E _pit) and the repassivation potential (E _rp) decreased with increase in Cl^– concentration and solution temperature and a more pronounced difference in E _pit values for various concentrations of S₂O₃ ^2– in 1.0 M Cl^– was obtained at lower temperatures. The effect of pH on E _pit, E _corr and E _rp values for different concentrations of S₂O₃ ^2– in the presence of 1.0 M Cl^– was also determined.     

Thermally exfoliated graphene oxide reinforced fluorinated pentablock poly(l‐lactide‐co‐ε‐caprolactone) electrospun scaffolds: Insight into antimicrobial activity and biodegradation

Three‐dimensional fluorinated pentablock poly(l ‐lactide‐co‐ε‐caprolactone)‐based scaffolds were successfully produced by the incorporation of thermally exfoliated graphene oxide (TEGO) as an antimicrobial agent with an electrospinning technique. In a ring‐opening polymerization, the fluorinated groups in the middle of polymer backbone were attached with a perfluorinated reactive stabilizer having oxygen‐carrying ability. The fiber diameter and its morphologies were optimized through changes in TEGO amount, voltage, polymer concentration, and solvent type to obtain an ideal scaffold structure. Instead of the widely used graphene oxide synthesized by Hummer's method, TEGO sheets having a low amount of oxygen produced by thermal expansion were integrated into the fiber structure to investigate the effect of the oxygen functional groups of TEGO sheets on the degradation and antimicrobial activity of the scaffolds. There was no antimicrobial activity in TEGO‐reinforced scaffolds in the in vitro tests in contrast to the literature. This study confirmed that a low number of oxygen functional groups on the surface of TEGO restricted the antimicrobial activity of the fabricated composite scaffolds. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43490.     

Albumin-based biomaterial for lung tissue engineering applications

The role of albumin-based biomaterials in tissue engineering (TE) cannot be overemphasized. The authors review the role of albumin in lungs scaffold grafting, which promotes cell seeding. Albumin grafted on decellularized lungs scaffold is presented as a great support material for cell-tissue interaction as well as for ease in attachment, growth, and differentiation when seeded with different types of cells. Albumin scaffold fabrication from different sources is a promising approach that may facilitate medical treatments from bench-to-bed, although the role of this scaffold in lungs surfactant proteins regeneration and binding needs to be fully elucidated.     

Experimental investigation of solid particles flow in a conical spouted bed using radioactive particle tracking

Solid particles flow in a conical spouted bed is characterized by radioactive particle tracking. The influence of operating conditions on key parameters of this flow is evaluated and discussed: the morphology of the solid bed is not strongly influenced by the forces exerted by the gas on the solid particles, but rather by geometrical considerations; the particles spend approximately 8% of their time in the spout in all experiments; it is the force exerted on the solid particles by the gas that directly controls the volumetric flow rate between adjacent regions, and not the amount of particles in the bed; as U/U_ms increases, the volume of solid particles in the annulus decreases, the volume of solid particles in the fountain increases and the volume of solid particles in the spout remains constant. Correlations to predict key flow parameters as functions of operating conditions are also established and discussed. © 2015 American Institute of Chemical Engineers AIChE J, 62: 26–37, 2016     

Development of a fluidized bed thermogravimetric analyzer

A new fluidized bed thermogravimetric analyzer (FB‐TGA) was developed that introduces two major particularities: the pseudo variation of the weight of the reactor and the special strategy for gas flow rate adjustment according to temperature. A momentum balance was performed on the reactor and the pseudo variation of the reactor weight was evaluated by measuring the pressure drop through the gas distributor and filter. The real weight loss of the reactor was obtained by subtracting the pseudo variation of the weight from the total weight loss measured by the load cell. In addition, a special program for the gas flow rate as a function of temperature was developed and used; so the minimum fluidization regime is maintained throughout all of the experiments. The validation test of the FB‐TGA was carried out on calcium hydroxide decomposition, and the results were compared with those obtained from the conventional TGA. Diffusion control was suppressed by the application of the FB‐TGA, which was confirmed by the x‐ray diffraction analysis on the treated samples. © 2014 American Institute of Chemical Engineers AIChE J, 61: 84–89, 2015     

Nanomechanical and tribological behavior of hydroxyapatite reinforced ultrahigh molecular weight polyethylene nanocomposites for biomedical applications

A hydroxyapatite (HA) particulate reinforced ultrahigh molecular weight polyethylene (UHMWPE) nanocomposite is fabricated by internal mixer at 180°C and using of paraffin oil as a processing aid to overcome the high viscosity of melted UHMWPE. The reinforcing effects of nano‐HA are investigated on nanomechanical properties of HA/UHMWPE nanocomposites by nanoindentation and nanoscratching methods. Results show that the nanocomposite with 50 wt % nano‐HA exhibits a Young's modulus and hardness of 362.5% and 200% higher, and a friction coefficient of 38.86% lower than that of pure UHMWPE, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42052.