Wide spectrum single quantum well superluminescent diodes at 0.8 mu m with bent optical waveguide

An AlGaAs quantum well superluminescent diodes (SLDs) with 68 nm spectral width at 5 mW output power have been developed. With 4 mu m mesa stripe angled at 7 degrees with respect to the output facet, the spectral ripple was less than 10% for uncoated devices.<>     

Service of mullite-corundum refractories in the center portion of the roof of high-power electric arc furnaces

Conclusions Type MKS domestic mullite-corundum parts to Technical Standard 14-8-140-75 have been introduced for the center portion of the water cooled roof of high-power arc steel melting furnaces at Belorussian Metallurgical Plant. The length of the roof campaign reached 180–220 heats without intermediate repairs, which is 25% longer than the life of imported refractories.The design of the center portion of the roof without a hole for charging of loose materials provides with the forms and dimensions of the parts used a symmetric lining and uniform distribution in it of the thermomechanical loads, which provides uniform wear of the lining and eliminates deformation of it during service of furnaces.On the basis of investigation of samples of the imported and domestic mullite-corundum roof parts after service it was established that wear of the lining occurs by fusion as the result of interaction of the refractories with the melting dust at 1660–1710°C.Different relative rates of chemical transformation and fusion of the mineral phases of the refractories were revealed. Mullite interacts with the melting reactants and fuses most intensely. In connection with this its content in mullite-corundum roof parts must not exceed 15–20%.Translated from Ogneupory, No. 1, pp. 56–60, January, 1987.     

Variant of Oxidative Utilization of Hydrogen Sulfide-Containing Gases

Direct oxidation into sulfur in a pseudo-fluidized bed of spherical catalyst is a selective method of treating hydrogen sulfide-containing gases (HSCG) [1]. In contrast to the Claus method, it can be used for treating gases with a wide range of hydrogen sulfide contents [2]. Acid (as in Claus units) and hydrocarbon-containing (casing-heated petroleum, natural, refinery) gases can be treated with this method [3].     

A system of phase synchronization of a spin-transfer nano-oscillator

We have studied the dynamics of a filterless phase-synchronization system (PSS) of a spin-transfer nano-oscillator (STNO) generating microwave oscillations in a broad range of frequencies under the effect of direct current and external magnetic field. Bifurcations in the system caused by a change in the frequency detuning of synchronized oscillations are considered. Bands of phase locking and synchronism are determined. The existence of a phase-locking band in the filterless PSS of STNOs basically distinguishes these oscillators from other types of microwave generators.     

Safe corrosion inhibitor for treating cooling water on heat power engineering plants

Heat power engineering (HPE) consumes significant volumes of water. There are, therefore, problems associated with corrosion, biological fouling, salt deposits, and sludge formation on functional surfaces of heat power equipment. One of the effective ways to solve these problems is the use of inhibitory protection. The development of new Russian import-substituting environmentally friendly inhibitors is very relevant. This work describes experimental results on the OPC-800 inhibitor (TU 2415-092-00206 457-2013), which was produced at Karpov Chemical Plant and designed to remove mineral deposits, scale, and biological fouling from the surfaces of water-rotation node systems on HPE objects. This reagent is successfully used as an effective corrosion inhibitor in the water recycling systems of Tatarstan petrochemical enterprises. To save fresh make-up water, the circulating system is operated in a no-blow mode, which is characterized by high evaporation and salt content coefficients. It was experimentally found that corrosion rate upon treatment of recycled water with the OPC-800 inhibitor is 0.08–0.10 mm/year. HPE mainly uses inhibitors based on oxyethylidene diphosphonic (OEDPA) and nitrilotrimethylphosphonic (NTMPA) acids. The comparative characteristic of inhibition efficiency for OPC-800 and OEDF-Zn-U2 is given. The results obtained indicate that OPC-800 can be used as an inhibitor for treatment of cooling water in HPE plants. In this case, it is necessary to take into account the features of water rotation of a thermal power plant.