Effect of Bi2O3 Addition on the Sintering Temperature and Microwave Dielectric Properties of Zn2SiO4 Ceramics

Bi₂O₃ was added to a nominal composition of Zn_1.8SiO_3.8 (ZS) ceramics to decrease their sintering temperature. When the Bi₂O₃ content was <8.0 mol%, a porous microstructure with Bi₄(SiO₄)₃ and SiO₂ second phases was developed in the specimen sintered at 885°C. However, when the Bi₂O₃ content exceeded 8.0 mol%, a liquid phase, which formed during sintering at temperatures below 900°C, assisted the densification of the ZS ceramics. Good microwave dielectric properties of Q × f =12,600 GHz, ɛ_r=7.6, and τ_f=−22 ppm/°C were obtained from the specimen with 8.0 mol% Bi₂O₃ sintered at 885°C for 2 h.     

Formation and Microwave Dielectric Properties of the Mg2V2O7 Ceramics

The formation process and microwave dielectric properties of the Mg₂V₂O₇ ceramics were investigated. The MgV₂O₆ phase that was formed at around 450°C interacted with remnant MgO above 590°C to form a homogeneous monoclinic Mg₂V₂O₇ phase. Finally, this monoclinic Mg₂V₂O₇ phase was changed to a triclinic Mg₂V₂O₇ phase for the specimen fired at 800°C. Sintering at 950°C for more than 5 h produced high-density triclinic Mg₂V₂O₇ ceramics. In particular, the Mg₂V₂O₇ ceramics sintered at 950°C for 10 h exhibited the good microwave dielectric properties of ɛ_r=10.5, Q × f =58 275 GHz, and τ_f=−26.9 ppm/°C.     

Microstructure and dielectric properties of compositionally graded Ba1-xSrxTiO3 multilayer tunable capacitors

Li₂O/B₂O₃-added Ba_1-xSr_xTiO₃ (B_1-xS_xT) ceramics, where 0.2 ≤ x ≤ 0.35, were well densified at 920 °C with pure perovskite structure. The dielectric constant, tunability, and figure of merit (FOM) of B_1-xS_xT ceramics increased with x because of the decreasing Curie temperature (T_C). The specimen with x = 0.35, whose T_C was close to room temperature, exhibited a large tunability of 27.4 % and FOM of 110 at 10 kV/cm. A compositionally graded multilayer (CGML), which was sintered at 920 °C, was fabricated using B_1-xS_xT thick films to produce a temperature-stable tunable capacitor, and it evinced a dense microstructure and a continuous interface between the B_1-xS_xT thick film and the Ag electrode. This CGML capacitor showed a large tunability (51 %) and FOM (150) at 20 kV/cm. It also exhibited stable tunability (17–28 % at 10 kV/cm) at temperatures between 30–90 °C. Therefore, the B_1-xS_xT CGML capacitor is a suitable candidate for temperature-stable tunable capacitors.     

Bi-templated grain growth maximizing the effects of texture on piezoelectricity

Templated grain growth is beneficial for piezoelectric materials, the properties of which become the best in their single crystalline form. Nevertheless, a textured ceramic prepared by a templated grain growth technique often fails in exhibiting as good properties as expected in single crystals even with a high degree of orientation factor. Here, we propose a new strategy for maximizing texturing effect by suppressing the growth of untextured matrix grains. The textured ceramics made by our method, so-called bi-templated grain growth, are featured by ultrahigh piezoelectric properties (d₃₃ = ～1,031 pC/N, d?g = ～59,000, k_p = ～0.76). A special emphasis is on the achieved electric-field-induced strain of 0.13 % at 1 kV/mm, which is as high as that of single crystals. This work demonstrates that not only the degree of texture but also the coarsening of untextured matrix grains should be well-controlled to best exploit the templated grain growth technique.     

Effect of gas mixing ratio on etch behaviors of Ba2Ti9O20 (BTO) and Pt thin films in Cl2/Ar inductively coupled plasma

An investigation of the Ba₂Ti₉O₂₀ (BTO) and Pt thin films etch mechanism in the Cl₂/Ar inductively coupled plasma was carried out. It was found that an increase in Ar mixing ratio at fixed gas pressure and input power causes a fast decrease in the BTO etch rate (26.9-1.2 nm/min for 0-100% Ar) while the Pt etch rate increases slightly from 17.4-23.0 nm/min. Langmuir probe diagnostics and zero-dimensional plasma modeling provided the data on plasma parameters, steady-state composition and fluxes of active species on the etched surface. From the model-based analysis of etch kinetics, it was shown that the behavior of the BTO etch rate corresponds to the reaction-rate-limited etch regime, where the etch rate is limited neither by physical sputtering of the main material nor by the ion-stimulated desorption of low-volatile reaction products. The etch process of Pt appears in the transitional regime and is controlled by the neutral and ion fluxes together.     

Informed consent: how much information is enough?

BACKGROUND: Recent judicial decisions involving informed consent have led to some medical practitioners altering the way they obtain consent. The aim of this study was to determine the degree to which patients understood the risks associated with a surgical procedure after giving routine consent and whether providing additional detailed verbal and/or written information improved their understanding. It was further determined whether the provision of more extensive information altered patients' anxiety levels. METHODS: Patients undergoing femoral popliteal bypass or carotid surgery were randomized to obtain either routine consent only or routine consent with verbal or written or verbal and written consent. Patients undertook a pre-operative risk and complication questionnaire, a pre- and postoperative anxiety and depression evaluation and a follow-up questionnaire 6 weeks after discharge. RESULTS: Thirty-two patients were included in the trial. The comprehension questionnaire resulted in a correct percentage response of 48% for the routine information only, 59% with added verbal information, 59% with added written information and 55% with added written and verbal information. Twenty-five per cent of patients stated that they had a poor understanding of the risks and complications of the procedure. CONCLUSIONS: Additional written or verbal information did not improve a patient's understanding of risks and complications of the procedure. It also did not improve patients' perceived understanding of the operation or its complications. Patients' anxiety levels were unaltered by the increase in the information they were given. The information provided to patients should be simple, easy to understand and list any possible major complications to enable the patient to determine whether to undergo or decline a procedure.     

Classical/nonclassical hybrid cannabinoids: southern aliphatic chain-functionalized C-6beta methyl, ethyl, and propyl analogues

The stereoelectronic requirements for interaction of the southern aliphatic hydroxyl of cannabimimetic pharmacophores with the CB1 and CB2 receptors are explored. The stereoselective syntheses of three series of classical/nonclassical hybrid cannabinoids are described. These compounds were designed to investigate the importance of the southern aliphatic hydroxyl (SAH) pharmacophore for cannabimimetic activity. Variation in the chain length of the SAH moiety in these 6beta-(hydroxyalkyl)dihydrobenzopyran analogues, from 6beta-hydroxymethyl to 6beta-(omega-hydroxyethyl) and 6beta-(omega-hydroxypropyl), and the effects of replacing the hydroxyl functionality by hydride and iodide are reported. Our results indicate that the SAH pharmacophore has less pronounced effects than the C-3 aliphatic chain on cannabinoid activity. Furthermore, it appears that this southern molecular component is capable of interacting with two different subsites on the receptor and that the nature of this interaction is determined by the terminal substituent on the C-6beta alkyl group. One of the subsites can accommodate the relatively polar SAH pharmacophore, while the second subsite interacts with more hydrophobic C-6beta substituents and can accommodate large spherical pharmacophores separated by three methylene carbons from the tricyclic cannabinoid template.