Flying Ad-hoc Network (FANET) is a new class of Mobile Ad-hoc Network in which the nodes move in three-dimensional (3-D) ways in the air simultaneously. These nodes are known as Unmanned Aerial Vehicles (UAVs) that are operated live remotely or by the pre-defined mechanism which involves no human personnel. Due to the high mobility of nodes and dynamic topology, link stability is a research challenge in FANET. From this viewpoint, recent research has focused on link stability with the highest threshold value by maximizing Packet Delivery Ratio and minimizing End-to-End Delay. In this paper, a hybrid scheme named Delay and Link Stability Aware (DLSA) routing scheme has been proposed with the contrast of Distributed Priority Tree-based Routing and Link Stability Estimation-based Routing FANET’s existing routing schemes. Unlike existing schemes, the proposed scheme possesses the features of collaborative data forwarding and link stability. The simulation results have shown the improved performance of the proposed DLSA routing protocol in contrast to the selected existing ones DPTR and LEPR in terms of E2ED, PDR, Network Lifetime, and Transmission Loss. The Average E2ED in milliseconds of DLSA was measured 0.457 while DPTR was 1.492 and LEPR was 1.006. Similarly, the Average PDR in %age of DLSA measured 3.106 while DPTR was 2.303 and LEPR was 0.682. The average Network Lifetime of DLSA measured 62.141 while DPTR was 23.026 and LEPR was 27.298. At finally, the Average Transmission Loss in dBm of DLSA measured 0.975 while DPTR was 1.053 and LEPR was 1.227.
Designing a spectrally efficient wireless channel requires a comprehensive understanding of its time and frequency varying characteristics, making it a stochastic medium of communication. These characteristics become more challenging to cater at the receiving terminal in a multipath transmission. This is because of the fading effect and Doppler shift of the transmitted frequency, specifically in cellular mobile radio systems and vehicle to vehicle communications. This paper presents the modeling, simulation, and then characterization of a cellular mobile radio multipath channel over its time and frequency varying fading gain. For this purpose, a discrete-time Finite Impulse Response (FIR) type filter of such a channel is designed, modeled, and simulated using time and frequency varying characteristics of the received signal. The simulated channel response is further analyzed in terms of coherence bandwidth, coherence time, delay spread, Doppler spread, and symbol time.
The electrical and photoresponse properties of Al/p-Si/organic layer/Al diode were investigated. Organic layer containing novel 2,2-bis[spiro(7,8-dioxy- 4-methylcoumarin)]-4,4,6,6-bis[spiro(2’,2”-dioxy-1’,1”- biphenylyl)]cyclotriphosphazene compound was coated by drop casting method on p-Si having ohmic contact. The structural characterization of novel cyclotriphosphazene compound was confirmed by using 1H, 13C and 31P-NMR, elemental analysis and FT-IR spectroscopic techniques. The diode exhibits a photoconducting and photodiode behavior under solar light illumination. The electrical parameters such as ideality factor, barrier height and series resistance of the diode were determined from I-V characteristics. It is seen that the photocurrent of the diode under illumination is higher than dark current. Also, the frequency dependence of capacitance (C) and conductance (G) was explained on the basis of interface states. It is evaluated that the hybrid photodiode can be used as a photosensor in organic photodetector applications. 相似文献
The Seebeck effect is used in thermoelectric generators (TEGs) to supply electronic circuits by converting the waste thermal into electrical energy. This generated electrical power is directly proportional to the temperature difference between the TEG module’s hot and cold sides. Depending on the applications, TEGs can be used either under constant temperature gradient between heat reservoirs or constant heat flow conditions. Moreover, the generated electrical power of a TEG depends not only on these operating conditions, but also on the contact thermal resistance. The influence of the contact thermal resistance on the generated electrical power have already been extensively reported in the literature. However, as reported in Park et al. (Energy Convers Manag 86:233, 2014) and Montecucco and Knox (IEEE Trans Power Electron 30:828, 2015), while designing TEG-powered circuit and systems, a TEG module is mostly modeled with a Thévenin equivalent circuit whose resistance is constant and voltage proportional to the temperature gradient applied to the TEG’s terminals. This widely used simplified electrical TEG model is inaccurate and not suitable under constant heat flow conditions or when the contact thermal resistance is considered. Moreover, it does not provide realistic behaviour corresponding to the physical phenomena taking place in a TEG. Therefore, from the circuit designer’s point of view, faithful and fully electrical TEG models under different operating conditions are needed. Such models are mainly necessary to design and evaluate the power conditioning electronic stages and the maximum power point tracking algorithms of a TEG power supply. In this study, these fully electrical models with the contact thermal resistance taken into account are presented and the analytical expressions of the Thévenin equivalent circuit parameters are provided. 相似文献
The ability of sawdust (treated and untreated) waste, a waste material derived from the commercial processing of cedrus deodar wood for furniture production, to remove/preconcentrate Cd(II) ions from aqueous solution was determined. Sorption was found to be rapid (approximately 97% within 8 min). The binding of metal ions was found to be pH dependent, optimal sorption accruing at around pH 4-8. Potentiometric titrations of sawdust revealed two distinct pK(a) values, the first having the value similar to carboxylic groups (3.3-4.8) and second comparable with that of amines (8.53-10.2) with the densities 1.99 x 10(-4) and 7.94 x 10(-5), respectively. Retained Cd(II) ions were eluted with 5 ml of 0.1 mol l(-1) HCl. Detection limit of 0.016 microg ml(-1) was achieved with enrichment factors of 120. Recovery was quantitative using sample volume of 600 ml. The Langmuir and D-R isotherm equations were used to describe partitioning behavior for the system at different temperatures. Kinetic and thermodynamic behavior of sawdust for Cd(II) ions removal was also studied. 相似文献
The present investigation is on examination of the natural convection and entropy generation considering the heatlines visualization of nanofluid I-shaped enclosure with two corrugated walls considering inner rectangular heater of three different heights. The influence of Brownian motion along with thermophoresis had been implemented using Inhomogeneous two-phase model of nanofluid. The governing equations were solved numerically using COMSOL software. Influence of Rayleigh number , Buoyancy ratio number , Lewis number , heater length . The results indicate that the influence of Lewis number on heat transfer bettering is stronger at high Rayleigh number while its impact is negligible at a lower value of Rayleigh number (conduction mode). In addition, the total entropy generation gets its highest value at Lewis number . Bejan number, fluid flow strength and heat rate increase as the rectangular heater height increases. Also, higher heat transfer augmentation is taken when the heater height is while increasing the heater height to leads to more total entropy generation. The impact of heater height on total entropy generation is highly affected by Rayleigh number as increasing the heater height from into , total entropy generation increases by at while it increases by at . 相似文献
Breast cancer is one of the most important causes of cancer related morbidity and mortality in the world. Along with genetic, environmental factors also play a multifaceted role in the development of disease. Breast contains several bacterial species performing specialized functions. Probiotics, as functional food, play pivotal role against breast cancer development in vivo and in vitro. Current review summarized all the available data related to diet, probiotics, and their association with breast cancer risk along with underlying mechanisms. Presently, it was believed that many of the commercially available probiotic products were safe to use and had some beneficial health effects for the host. Probiotics had a potential to act against breast cancer progression evidenced by many animal model and cell-based experiments. Some probiotics strains may be useful as an adjuvant therapy for breast cancer prevention or treatment, by modulating immune response or breast microbial community. However, large-scale clinical trials and intense research are mandatory to explore probiotics-related metabolic and molecular mechanisms in breast cancer. 相似文献
Metabolic mixtures are often analyzed via NMR spectroscopy as it provides a metabolic profile without sample alteration in a noninvasive manner. These mixtures however tend to be very complex and demonstrate considerable spectral overlap resulting in assignments that are sometimes ambiguous given the range of current NMR methods available. De novo molecular identification in these mixtures is generally accomplished using chemical shift information and J-coupling based experiments to determine spin connectivity information, but these techniques fall short when a molecule of interest contains nonrelaying centers. A method is presented here that enhances intramolecular spatial interactions via supercooled water and uses the resulting spatial correlations to edit mixtures. This is accomplished by utilizing nuclear Overhauser effect spectroscopy (NOESY) at subzero temperatures in capillaries to enhance NOE and provide more complete spin systems. This technique is applied to a standard mixture of three known molecules in D(2)O with overlapping resonances and is further demonstrated to assign molecules in a worm tissue extract. The current method proves to be a powerful complement to existing methods such as total correlation spectroscopy (TOCSY) to expand the range of molecules that can be assigned in situ without physical separation of mixtures. 相似文献
We present temperature-dependent ionic transport through an array of nanopores (cylindrical and conical) and a single conical nanopore functionalized with amine-terminated poly(N-isopropylacrylamide) [PNIPAAM-NH(2)] brushes. For this purpose, nanopores are fabricated in heavy ion irradiated polyethylene terephthlate (PET) membranes by a controlled chemical track-etching technique, which leads to the generation of carboxyl (COOH) groups on the pore surface. End-functionalized polymer chains are immobilized onto the inner pore walls via a 'grafting-to' approach through the covalent linkage of surface COOH moieties with the terminal amine groups of the PNIPAAM molecules by using carbodiimide coupling chemistry. The success of the chemical modification reaction is corroborated by measuring the permeation flux of charged analytes across the multipore membranes in an aqueous solution, and for the case of single conical pore by measuring the current-voltage (I-V) characteristics, which are dictated by the electrostatic interaction of the charged pore surface with the mobile ions in an electrolyte solution. The effective nanopore diameter is tuned by manipulating the environmental temperature due to the swelling/shrinking behaviour of polymer brushes attached to the inner nanopore walls, leading to a decrease/increase in the ionic transport across the membrane. This process should permit the thermal gating and controlled release of ionic drug molecules through the nanopores modified with thermoresponsive polymer chains across the membrane. 相似文献