Assessing material qualities and efficiency limits of III–V on silicon solar cells using external radiative efficiency

The paper presents a quantitative approach to the investigation and comparison of the material qualities of III–V on silicon (III–V/Si) solar cells by using external radiative efficiencies. We use this analysis to predict the limiting efficiencies and evaluate the criteria of material quality in order to achieve high‐efficiency III–V/Si solar cells. This result yields several implications for the design of high‐efficiency III–V/Si solar cells. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of supplied gas humidity change on PEFC transient power generation

Polymer electrolyte fuel cells (PEFCs, PEMFCs) are gaining increasingly more attention as clean and efficient energy‐conversion devices. Vapor and liquid transport has a strong impact on the power generation characteristics and efficiency of PEFCs, and so proper water management is needed for efficiency and durability. However, water transport factors are not well understood, particularly during unsteady operation—often the case in vehicles and distributed stationary power generators. In this study, to understand and generalize the effects of local water transport on PEFC performance, transient mass transport characteristics inside a PEFC were investigated experimentally and numerically. For this purpose, we developed an unsteady two‐dimensional numerical model based on mass‐ and charge‐conservation equations in the channel, gas diffusion layer (GDL), and membrane electrode assembly (MEA). As necessary parameters for model development, we measured the water content of the MEA, the membrane resistivity, the activation overvoltage, overall mass transfer coefficient, and so on. The membrane resistivity greatly increases as the relative humidity decreases. The activation overvoltage is also affected by the relative humidity, and not only by the current density and oxygen activity. Current load and voltage changes are frequently used as PEFC transient inputs, but lead to very complicated and intractable phenomena such as changes in the amount of generated water and electro‐osmosis, state of the electrical double layer, and so on. Hence, stepwise changes in the relative humidity of the supplied gas were adopted in this study. The experimental and numerical transient responses were in good agreement under most operating conditions, and the reliability of our measurement methods for the water transport properties and our numerical model were confirmed. Here we discuss the dominant factor in the transient responses, and conclude that the transport resistance at the PEM–GDL interface is the largest and most dominant factor in a relatively dry state under unsteady operating conditions. © 2011 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.20371     

Mechanical stress effect on oxygen ion mobility in 8 mol% yttria-stabilized zirconia electrolyte

In the present study, the effect of mechanical tensile stress on oxygen mobility in 8 mol% yttria-stabilized zirconia (8YSZ) was investigated. The experimental results show that the ionic conductivity increases with stress and saturates. The maximum improvement in the conductivity was about 18% observed at 973 K. The simulation results show that the diffusion coefficient increases with stress and decreases with excessive stress. The maximum improvement was about 40% observed at 973 K. The improvement was larger at lower temperatures in both the experiment and the simulation. The strain caused by the stress is considered to have caused the gradient in the potential energies of the neighbouring oxygen sites, especially around the yttrium ions, which probably facilitated the migration of the oxygen ions.     

A genetic algorithm for the optimal sequential partitioning problem

The optimal sequential problem is defined as the problem of finding the minimum cost partition of the nodes of a directed acyclic graph into subsets of a given size, subject to the constraint that the precedence relationships among the elements are satisfied. A heuristic algorithm based on tabu search has been proposed for this problem [2]. However, there is a tendency for the solutions obtained by tabu search to become trapped in bad local optima in parallel graphs with random edge costs. In this paper we present a genetic algorithm for the optimal sequential partitioning problem. We develop an effective two‐point partial order crossover satisfying sequential conditions, which preserve better blocks that have a larger sum of edge costs. In this crossover we introduce the roulette selection method to escape local optima. We also assess the effectiveness of the algorithm. The results show that this proposed algorithm outperforms any other algorithm using tabu search in terms of solution quality. © 2001 Scripta Technica, Electr Eng Jpn, 135(4): 43–51, 2001     

Preparation of Cu2ZnSnS4 thin films by sulfurizing electroplated precursors

Cu₂ZnSnS₄ (CZTS) thin films were prepared by sulfurizing precursors deposited by electroplating. The precursors (Cu/Sn/Zn stacked layers) were deposited by electroplating sequentially onto Mo-coated glass substrates. Aqueous solutions containing copper sulfate for Cu plating, tin sulfate for Sn plating and zinc sulfate for Zn plating were used as the electrolytes. The precursors were sulfurized by annealing with sulfur at temperatures of 300, 400, 500 and 600 °C in an N₂ gas atmosphere. The X-ray diffraction peaks attributable to CZTS were detected in thin films sulfurized at temperatures above 400 °C. A photovoltaic cell using a CZTS thin film produced by sulfurizing an electroplated Sn-rich precursor at 600 °C exhibited an open-circuit voltage of 262 mV, a short-circuit current of 9.85 mA/cm² and an efficiency of 0.98%.     

Fabrication of high‐strength steel fibre reinforced metal matrix composites by explosive bonding and their tensile properties

Summary

Steel fibre reinforced metal matrix composites (FRM) consisting of high‐strength ductile steel wire and aluminium or titanium foil were fabricated by explosive bonding. The strength properties were evaluated by tensile tests. The optimum explosive loading (explosive mass/driver plate mass) increases with the volume fraction of fibre. For the aluminium matrix composites, the micrographs obtained show sound bonding between the adjoining foils and non‐bonding between the foil and steel wire. The tensile strength of the aluminium matrix composites is 80% of the value predicted by the rule of mixtures. For the titanium matrix composites, the micrographs obtained show both bonded and unbonded regions between the adjoining foils or between the foil and steel wire. The tensile strength of the titanium matrix composites agrees with the value predicted by the rule of mixtures.     

A case of cavernous dural arteriovenous fistula resulting in intracerebral extravasation during transvenous embolization

Cortical venous drainage has been described as one of the major risk factors for dural arteriovenous fistula, which may induce venous hypertension leading to venous ischemia or intracerebral hemorrhage. However, it is rather rare to observe cortical venous drainage manifesting in this way in the cavernous sinus region. We report a case of a 55-year-old gentleman with a right cavernous dural arteriovenous fistula, presenting with conjunctival chemosis, exophthalmus and ocular hypertension on the affected side. Magnetic resonance imaging showed a small intracerebral hemorrhage in the right frontal lobe. Cerebral angiography revealed a dural arteriovenous fistula in the right cavernous sinus draining into the right olfactory vein via the uncal vein, as well as into the superior and inferior ophthalmic veins. This unusual cortical venous reflux was thought to be consistent with the intracerebral hemorrhage found on the magnetic resonance imaging. The patient underwent transvenous embolization for the dural arteriovenous fistula using an inferior petrosal catheterization into the uncal vein was difficult, and the cortical venous reflux through the vein seemed to be slight. However, extravasation of the contrast material occurred in the right frontal lobe after obliteration of the ophthalmic veins during the procedure. The cause of the extravasation was suspected to be the same olfactory vein that had been involved in the previous intracerebral hemorrhage. The obliteration of the dural fistula was continued rapidly, and the fistula disappeared after the embolization. Neurologically, the patient had no noticeable troubles, except for a mild headache. The pretreatment symptoms were alleviated within several days, and the patient was discharged in a week. We emphasize the following points from this rare case in order to facilitate a safer procedure during transvenous embolization for cavernous dural arteriovenous fistula. It is important to obliterate the cortical venous drainage as early as possible, even if the reflux is small or the catheterization is difficult. Repeated, careful sinography is useful for the evaluation of the drainage pattern at certain stages during the transvenous embolization procedure.     

Control of serial sampling systems

In industrial multivariable plants, it is often the case that the plant outputs are detected not simultaneously but serially. The problem of estimating the state vector of the plant based on the data obtained from such a detection scheme is considered, and a special type of observer (referred to as a serial-sampling type) which renews its internal state whenever new data are obtained is proposed. The constructability of a serial-sampling observer and the stability of the closed-loop system which includes such an observer are theoretically studied     

Immunochemical approaches to AGE-structures: characterization of anti-AGE antibodies

An extractionless method for determining aflatoxin M1 (AFM1), a major metabolite of aflatoxin B1 (AFB1), in human urine was developed. The biological fluid is injected directly into the chromatographic system after simple dilution and centrifugation. A pre-column, packed with a cation-exchange phase and coupled on-line to a column-switching liquid chromatography (LC) system, is used for sample pre-treatment and concentration. The analytes are non-selectively desorbed with the LC eluent and cleaned by means of a column-switching procedure. Pre-treatment and analysis were performed within 40 min. Average AFMI recovery reached 97% in the 10-100 ng/l range of urine. The detection limit of AFM1 in urine and milk was 2.5 ng/l for 1 ml of injected sample. A comparison with an immunoaffinity column clean-up and LC method was performed. The method was applied to determine AFM1 in the urine of AFB1 gavaged rats, and in the urine of both potentially exposed and supposedly unexposed workers. The method was also extended to milk.     

Japanese programs on novel concepts in PV

Japanese R&;D activities in photovoltaics (PV) and our R&;D activities with III-V compound multijunction (MJ) solar cells are presented. We have realized high-efficiency InGaP/InGaAs triple-junction solar cells with an efficiency of 36.5–37% (AM1.5G, 200 suns) and concentrator triple-junction solar cell modules with an outdoor efficiency of 27% as a result of designing a grid structure, developing low optical loss Fresnel lens and homogenizers, and designing low thermal conductivity modules. Our challenge now is to develop low-cost and high output power concentrator MJ solar cell modules with an output power of 400 W/m² for terrestrial applications.