Antioxidant and anticholinesterase activity of essential oils and ethanol extracts of <Emphasis Type="Italic">Thymus algeriensis</Emphasis> and <Emphasis Type="Italic">Teucrium polium</Emphasis> from Algeria

This study aimed to investigate the cholinesterase (ChE) inhibitory and antioxidant activities of essential oil (EO) and ethanolic extract (EE) of two Lamiaceae medicinal plants from Algeria: Thymus algeriensis Boiss. & Reut. and Teucrieum polium subsp capitatum. The chemical composition of EOs analyzed by GC and GC–MS revealed the presence of carvacrol (43.2%), p-cymene (18.7%) and γ-terpinene (14.8%) as major compounds in T. algeriensis, while germacrene D (25.0%), bicyclogermacrene (10.4%), β-pinene (11.3%) and spathulenol (5.8%) were the most important components in T. polium oil. The best inhibitory activity on acetylcholinesterase (AChE) was exhibited by the EO of T. algeriensis. On the other hand, T. polium oil was more efficient against butyrylcholinesterase (BChE) than against AChE, whereas EEs showed weak or no inhibitory effect, particularly against AChE. Antioxidant activity was evaluated by β-carotene bleaching, ferric and cupric reducing powers and inhibition of ABTS^?+, DPPH^? and superoxide radicals. EOs showed different antioxidant trends depending on the assay used while ethanol extracts had high activity with all tests.     

Study of woven fabric shear behaviour

The paper presents the shear frame test with a new method of gripping the fabric sample to describe the shear behaviour of fabrics used in the garment industry under high shear strain conditions (maximum shear angles of 20°). This shear frame test was also used to compare between hysteresis curves given by the Kawabata evaluation system (KES) test, the bias extension test and the shear frame test for 10 woven fabrics. The linear viscoelastic theory was used to analyse the shear relaxation behaviour of the woven fabrics. In addition, in this study, the kernel function of the generalised Maxwell model has been used to describe the viscoelastic properties of the fabrics.     

Pressure control in a PEM fuel cell via second order sliding mode

Pressure difference inside the Polymer Electrolyte Membrane Fuel Cells (PEMFC) arises due to load variations, during which the pressure difference between anode and cathode rises. Practically, this problem can be avoided by equalizing anode and cathode pressures, to protect the fuel cell from permanent damage. This paper focuses on pressure regulation in the anode and cathode sides of the PEMFC. The control objective is achieved using second order sliding mode multi-input multi-output (MIMO) controller based on “Twisting algorithm”. Parametric uncertainty is formally presented and included in a nonlinear dynamic fuel cell model. The resultant nonlinear controller is robust and is proved to guarantee performance around any equilibrium point and under parametric uncertainty. Simulation results show that the proposed controller has a good transient response under load variations.     

Energy management of a hybrid photovoltaic system

This work describes a new control strategy for active energy flow in a hybrid photovoltaic (PV) system. The method introduces an online energy management by a hierarchical fuzzy controller between energy sources that consist of a photovoltaic panel (PVP), the battery and the load. The fuzzy logic controller has been developed for power splitting between PVP and battery, and it makes decision to choose the switching chain rules and corresponding controller. Simulation test results illustrate improvement in the operation's efficiency of online state of the switches and the battery's state of charge (SOC) has been maintained at a reasonable level. Copyright © 2010 John Wiley & Sons, Ltd.     

Effect of mineralogical composition and kerogen content on oil shale natural floatability

Mineralogical composition is one of the important factors that affect the performance of separation processes. In the current study, two oil shale samples, from El-Nakhil and El-Bieda localities, differ in their mineralogical composition, were subjected to flotation tests. Chemical analysis, differential thermal analysis (DTA), thermo-gravimetric analysis (TGA), and microscopic examination are among the used characterization techniques. In addition, their responses for upgrading by flotation were conducted as a function of pH, solid-liquid ratio, stirring speed and different particle sizes. The characterization results indicated that the kerogen content in El-Nakhil sample was 30% while in El-Beida sample was 10%. On the other hand, the flotation results indicated that El-Bieda responses better than that of El-Nakhil in terms of the difference in kerogen % between the original sample and the concentrated ones. The difference in flotation results of two samples can be explained by the difference in kerogen morphology as well as its interaction with surrounding matrix. In El-Bieda the kerogen has a laminated structure but in El-Nakhil it appears as laminated liptinitic component, in addition to the higher carbonate content in El-Nakhil sample in comparison to higher clay content in El-Bieda sample.     

Identification of factors that accelerate hydrogen production by Clostridium butyricum RAK25832 using casamino acids as a nitrogen source

The ability of Clostridium butyricum RAK25832 to use casamino acids as a nitrogen source was investigated. Strain RAK25832 showed the capacity to utilize different types of carbon sources. With glucose as a carbon source (10 g/L), the preferred final concentration of casamino acids was 26.67 g/L, with a cumulative hydrogen production, production rate, and yield of 2505 mL H₂/L, 160 mL/h, and 1.81 mol H₂/mol glucose, respectively. Eighteen metal elements were screened to identify the most important metals for biohydrogen production, and four elements were optimized. The optimal medium composition was MgCl₂·6H₂O (0.1 g/L), K₂HPO₄·3H₂O (6.67 g/L), NaHCO₃ (2.6 g/L), and FeCl₂·4H₂O (0.002 g/L). Vitamin supplementation of the medium showed no significant effect on hydrogen production. Under the optimized conditions, cumulative hydrogen production reached 3074 mL H₂/L. This is the first study to demonstrate the use of casamino acids as a nitrogen source by C. butyricum.     

Symposium review: The importance of the ruminal epithelial barrier for a healthy and productive cow

The stratified squamous ruminal epithelium is the main site for absorption of key nutrients (e.g., short-chain fatty acids; SCFA) and electrolytes (e.g., sodium and magnesium). The absorptive function has to be highly selective to prevent simultaneous entry of microbes and toxins from the rumen into the blood. As such, epithelial absorption is primarily transcellular, whereas the paracellular pathway appears rather tightly sealed. A network of tight junction (claudin-1, claudin-4, and occludin) and tight junction-associated proteins (e.g., zonula occludens) accomplishes the latter. When microbial fermentation activity is high such as with highly fermentable diets, rumen epithelial functions are often challenged by acidity, high osmolarity, toxins (e.g., endotoxin and histamine), and immune mediators (inflammatory mediators and cytokines) released during local and systemic inflammation. Epithelial damage by low pH in combination with high luminal SCFA concentrations is not immediately reversible and may initially aggravate upon return to physiological pH. In contrast, barrier opening upon hyperosmolarity is acutely transient. The initial insults set by luminal acidity and SCFA and the increasing concentrations of microbial-associated molecular patterns such as lipopolysaccharides are key factors that trigger inflammation not only in the rumen but also in the hindgut (cecum and colon), which reach out to the liver and other organs, causing systemic inflammation. Low feed intake during parturition, transportation, heat stress, or disease is the second most relevant challenge for the ruminal epithelial barrier. The barrier opening is usually only transient and quickly restored upon refeeding. Due to a rapid, dose-dependent, and prolonged decrease in absorption capacity for SCFA, however, any feed restriction increases the odds for postrestriction subacute ruminal acidosis. Inflammation due to acidosis can be alleviated by supplemental thiamine, yeasts, and plant bioactive (phytogenic) compounds. Butyrate is used in weaning calves to support ruminal barrier development; however, excess butyrate may promote hyperkeratosis, parakeratosis, and epithelial injury in the fully developed rumen of adult cows. Further research is needed to enhance the understanding of the various factors that counteract barrier impairment and help barrier restoration during acidogenic feeding, especially when concurring with unavoidable periods of feed restriction.     

Silver nanoparticle films by flowing gas atmospheric pulsed laser deposition and application to surface-enhanced Raman spectroscopy

For the fast uptake into industrial applications, the further development of robust methods of nanomaterials, which are inexpensive and simultaneously technologically feasible, is one of the major key factors. A newly introduced atmospheric pulsed laser deposition method, based on a flowing gas approach, was used for plasmonic metal nanoparticle (NP) film of silver. Contrary to vacuum, in this method, the ambient air restricts expansion of the ablation plume within 1 to 3 mm above the target surface. These sets constrain on the formation of NP film close to the ablation spot. For deposition on a widely spaced surface, ablation material was entrained in a flow of argon, supplied at ~32 ms⁻¹, and effectively delivered to the substrate at ~20 ms⁻¹. The films produced were crystalline and particulate in nature, showing spectral plasmonic feature of surface plasmon resonance in the visible region. The film was directly tested in surface-enhanced Raman spectroscopy for chemical detection of crystal violet; the film with large particulates and aggregated crystallites was well-performed, showing enhanced Raman signals and detection sensitivity. Certainly, flowing gas atmospheric pulsed laser deposition seems a fast alternative to vacuum-pulsed laser deposition but needs further investigations to bring it in the industry for applications in sensor, catalysis, solar cell, and coating technology.     

Theoretical investigation of plasma dynamical behavior and halo current analysis

In this paper, a novel system has been developed for plasma disruption conditions followed by downward vertical displacement. During the disruption, size and orientation of plasma decreases, which gives the halo current circulated around each contacting point in radial as well as in poloidal directions. Therefore, a new mathematical model has been developed, which gives the interaction forces of halo current, vertical, and radial plasma dynamical behavior (linear and nonlinear). This theoretical approach showed that the tokamak plasma has two connecting points in order to distinguish between the stable and unstable position. This model can particularly give the magnetic field change points and changing of flux, which are more convenient in order to discuss the static and tilting position of plasma behavior. Numerical techniques have been calculated in terms of plasma dynamical behavior, that is, Electromagnetic/plasma, Vertical Displacement Event (VDE) stages, and initial interaction between the forces under specific time interval. The objective of the research is to developed theoretical and computational model in order to investigate the dynamical behavior of plasma under disruption conditions. This is the novel method, and no work has been reported so far. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.