Effect of Ni Addition on the Morphology and Microstructure of Both Conventional Cast and Melt-Spun of Al–Si–Fe–Nb (at wt%) Alloy

Metals and Materials International - In this project the morphology and microstructure of both conventional cast and melt spun of Al–20Si–9Fe–1.2Nb and...     

Lean Construction: From Theory to Implementation

This article compares the techniques developed for lean construction with those developed for lean manufacturing. Lean manufacturing and lean construction techniques share many common elements despite the obvious differences in their assembly environments and processes. Manufacturing plants and construction sites are different in many ways that might explain why lean production theories and practices do not fully fit the construction industry. Though many lean construction tools and elements are still in an embryonic state, lean construction techniques are gaining popularity because they can affect the bottom line of projects. Additionally, this paper presents a study of a construction project in which specific lean construction elements were tested. Each technique was evaluated in terms of its impact on the performance of the project. Based on the findings of the study, a new “lean assessment tool” is proposed to quantify the results of lean implementations. The assessment tool evaluates six lean construction elements: last planner, increased visualization, huddle meetings, first-run studies, five S’s, and fail safe for quality. This paper provides a simple and comprehensive approach that is transferable to any construction project.     

Growth and characterization of gold catalyzed SiGe nanowires and alternative metal-catalyzed Si nanowires

The growth of semiconductor (SC) nanowires (NW) by CVD using Au-catalyzed VLS process has been widely studied over the past few years. Among others SC, it is possible to grow pure Si or SiGe NW thanks to these techniques. Nevertheless, Au could deteriorate the electric properties of SC and the use of other metal catalysts will be mandatory if NW are to be designed for innovating electronic. First, this article's focus will be on SiGe NW's growth using Au catalyst. The authors managed to grow SiGe NW between 350 and 400°C. Ge concentration (x) in Si1-xGex NW has been successfully varied by modifying the gas flow ratio: R = GeH4/(SiH4 + GeH4). Characterization (by Raman spectroscopy and XRD) revealed concentrations varying from 0.2 to 0.46 on NW grown at 375°C, with R varying from 0.05 to 0.15. Second, the results of Si NW growths by CVD using alternatives catalysts such as platinum-, palladium- and nickel-silicides are presented. This study, carried out on a LPCVD furnace, aimed at defining Si NW growth conditions when using such catalysts. Since the growth temperatures investigated are lower than the eutectic temperatures of these Si-metal alloys, VSS growth is expected and observed. Different temperatures and HCl flow rates have been tested with the aim of minimizing 2D growth which induces an important tapering of the NW. Finally, mechanical characterization of single NW has been carried out using an AFM method developed at the LTM. It consists in measuring the deflection of an AFM tip while performing approach-retract curves at various positions along the length of a cantilevered NW. This approach allows the measurement of as-grown single NW's Young modulus and spring constant, and alleviates uncertainties inherent in single point measurement.     

Reprint of: Oxidative dehydrogenation of cyclohexane and cyclohexene over supported gold, –palladium catalysts

Supported gold, palladium and gold–palladium catalysts have been used to oxidatively dehydrogenate cyclohexane and cyclohexenes to their aromatic counterpart. The supported metal nanoparticles decreased the activation temperature of the dehydrogenation reaction. We found that the order of reactivity was Pd ≥ Au–Pd > Au supported on TiO₂. Attempts were made to lower the reaction temperature whilst retaining high selectivity. The space-time yield of benzene from cyclohexane at 473 K was determined to be 53.7 mol/kg_cat/h rising to 87.3 mol/kg_cat/h at 673 K for the Pd catalyst. Increasing the temperature in this case improved conversion at a detriment to the benzene selectivity. Oxidative dehydrogenation of cyclohexene over AuPd/TiO₂ or Pd/TiO₂ catalysts was found to be very effective (conversion >99% at 423 K). These results indicate that the first step in the reaction sequence of cyclohexane to cyclohexene is the slowest step. These initial results suggest that in a fixed-bed reactor the oxidative dehydrogenation in the presence of oxygen, palladium and gold–palladium catalysts are readily able to surpass current literature examples and with further modification should yield even higher performance.     

Characterization and electrical conductivity of poly(ethylene glycol)/polyacrylonitrile/multiwalled carbon nanotube composites

Poly(Lactic acid) (PLA)‐layered silicate nanocomposite films were prepared by solvent casting method. The films were irradiated with Co⁶⁰ radiation facility at dose of 30 kGy. The effect of γ irradiation on mechanical properties of the neat PLA and nanocomposites was evaluated by data obtained from tensile testing measurements. The tensile strength of the irradiated PLA films increased with addition of 1 wt % triallyl cyanurate indicating crosslink formation. Significant ductile behavior was observed in the PLA nanocomposites containing 4 pph of nanoclay. Incorporation of nanoclay particles in the PLA matrix stimulated crystal growth as it was studied by differential scanning calorimetry. The morphology of the nanocomposites characterized by transmission electron microscopy and X‐ray diffraction revealed an exfoliated morphology in the PLA nanocomposite films containing 4 pph of nanoclay. Only very small changes were observed in the chemical structure of the irradiated samples as it was investigated by Fourier transform infrared spectroscopy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Study and characterization of porous copper oxide produced by electrochemical anodization for radiometric heat absorber

The aim of this work is to optimize the different parameters for realization of an absorbing cavity to measure the incident absolute laser energy. Electrochemical oxidation is the background process that allowed the copper blackening. A study of the blackened surface quality was undertaken using atomic force microscopy (AFM) analysis and ultraviolet-visible-infrared spectrophotometry using a Shimadzu spectrophotometer. A two-dimensional and three-dimensional visualization by AFM of the formed oxide coating showed that the copper surfaces became porous after electrochemical etching with different roughness. This aspect is becoming more and more important with decreasing current density anodization. In a 2 mol L ^-1 of NaOH solution, at a temperature of 90°C, and using a 16 mA cm² constant density current, the copper oxide formed has a reflectivity of around 3% in the spectral range between 300 and 1,800 nm. Using the ‘mirage effect’ technique, the obtained Cu₂O diffusivity and thermal conductivity are respectively equal to (11.5 ± 0.5) 10 to 7 m² s^-1 and (370 ± 20) Wm^-1 K^-1. This allows us to consider that our Cu₂O coating is a good thermal conductor. The results of the optical and thermal studies dictate the choice of the cavity design. The absorbing cavity is a hollow cylinder machined to its base at an angle of 30°. If the included angle of the plane is 30° and the interior surface gives specular reflection, an incoming ray parallel to the axis will undergo five reflections before exit. So the absorption of the surface becomes closely near 0.999999.     

Inactivation of pathogenic Klebsiella pneumoniae by CuO/TiO2 nanofibers: A multifunctional nanomaterial via one-step electrospinning

The fabrication and characterization of one-dimensional CuO/TiO₂ nanofibers with high photocatalytic and antibacterial activities are presented. The CuO/TiO₂ nanofibers were prepared by electrospinning of colloid composed of titanium isopropoxide, poly(vinylpyrroliodine) (PVP) and copper nanoparticles and calcination at 700 °C in air for 1 h. The antibacterial activity was tested using Klebsiella pneumoniae as model organism by calculation of the minimum inhibitory concentration (MIC). The obtained CuO/TiO₂ nanofibers showed prominent photocatalytic activity under visible light to degrade reactive black5 and reactive orange16 dyes in aqueous solutions and effectively catalyze K. pneumoniae inactivation. The decomposition process of the cell wall and cell membrane was directly observed by TEM analysis after the exposure of the K. pneumoniae to the nanofibers. Interestingly, the introduced photocatalyst can be reused with the same photocatalytic activity. Overall, the combination of CuO and TiO₂ can be synergistic and resulted in CuO/TiO₂ composite nanofibers having superior photocatalytic and antimicrobial potential to impede K. pneumoniae growth which causes bacterium to die ultimately.     

Synthesis and characterization of radiation cross-linked PVP hydrogels and investigation of its potential as an antileishmanial drug carrier

Polymer Bulletin - The aim of this study was to elaborate a suitable hydrogel to be used as drug carrier for antileishmanial treatment. Therefore, a PVP hydrogel was synthesized using gamma...     

Microstructure and mechanical properties of Al2O3/ZrO2 composites by two-step sintering

Composites of Al₂O₃/ZrO₂ (containing 25, 50, and 75 vol% ZrO₂) were prepared by mixing Al₂O₃ and ZrO₂ suspensions. The microstructural control via two-step sintering (TSS) was the main objective of this work. For this purpose, different sintering curves were constructed, aiming to achieve the best temperature combination for the sintering steps that provides higher density and finer microstructure. The results were compared with single-step sintering (SSS). Furthermore, microhardness and fracture toughness were measured for the best TSS specimens under each composition. The results showed that the high densities were obtained, and the reduction of grain size was greater than 40% for two-step sintered specimens, compared to SSS ones. Consequently, microhardness values increased. However, fracture toughness values remained unchanged.