Dual-Rotation Speed Friction Stir Welding: Experimentation and Modeling

Implementing differential rotation speeds of pin and shoulder in the friction stir welding process is considered. Experimental investigations were carried out using a newly designed and fabricated apparatus for dual-rotation speed friction stir welding. Metallographic studies demonstrated that appropriate selection of separate pin and the shoulder rotation speeds not only results in defect-free joints, but also affects the weld zone by controlling the heat input delivered. An energy model for predicting maximum temperature was extended to the dual-rotation speed friction stir process. The model was verified using the previous experimental results reported in the literature.     

Wear assessment of plasma nitrided AISI H11 steel

Plasma nitriding is one of the effective methods for improvement of the hardness, wear and corrosion resistance of steels. In this research AISI H11 hot working tool steel was plasma nitrided in various gas mixtures for different times and temperatures. The morphology, size and composition of nitride nanoparticles formed on the surface of the specimens were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD). The wear behavior of plasma nitrided samples was studied by means of unlubricated pin-on-disc method under constant load of 80 N, sliding speed of 1 m/s, sliding distance of 2000 m at room temperature. The results showed plasma nitriding process improved the wear behavior of H11 steel. The increase in time and temperature of plasma nitriding decreased the hardness and increased the wear weigh loss of the specimens.     

Self-tuning control of systems with unknown time delay via extended polynomial identification

Much of the work reported on self-tuning control addresses the class of systems with known time delay. In this paper, the continuous time self-tuning control algorithm is extended to systems with unknown or varying time delay. The original polynomial identification is further modified in this paper to estimate both poles, zeros, and unknown time delay. An explicit self-tuner is then designed based on the estimated parameters. Experimental studies are used to evaluate the performance of this algorithm.     

Self-tuning PID controller using Newton-Raphson search method

A new algorithm for self tuning of proportional-integral-derivative (PID) controllers is proposed. A combined least-squares estimation and Newton-Raphson search technique is used to determine the ultimate gain and period of an unknown system for the purpose of automatic tuning of PID controllers based on Ziegler and Nichols (ZN) or refined Ziegler and Nichols (RZN) formulas. The proposed algorithm can be applied to systems with known time delay, as well as those with unknown dead time. Simulation studies are used to demonstrate the performance of this algorithm. The performance of this PID self tuner is also compared with a popular commercial auto-tuner for simulated systems and a laboratory-scale real plant     

A period of anaerobic exercise increases the accumulation of reactive carbonyl derivatives in the lungs of rats

Compartment syndrome is caused by an increase in intracompartmental pressure above the capillary level, preventing capillary flow. The acute onset of symptoms occurs after events such as fracture, soft tissue trauma, and revascularization and usually necessitates prompt fasciotomy to avoid loss of function or even necrosis of the enclosed muscle. Compartment syndromes in athletes are of a recurrent nature and are usually referred to as chronic. Nonoperative treatment is often successful. Although compartment syndromes can occur in several anatomic regions, the most commonly seen in athletes involve the leg. Chronic compartment syndromes of the upper extremity are rare, and only a few cases have been reported in the literature. The intracompartmental pressures causing chronic symptoms in these cases ranged between 22 mm Hg at rest and 40 mm Hg after 30 minutes of exercise. Under maximal contraction, a pressure of 58 mm Hg has been recorded. The object of this paper is to report a case of a tennis player where much higher flexor-pronator muscle intracompartmental pressures than those noted above were recorded. We compared the intracompartmental pressure data of this patient with intracompartmental pressures measured in six symptom-free volunteers.     

Optimization of fused fuzzy systems via genetic algorithms

In this paper, the problem of optimization of fused fuzzy systems via genetic algorithms is addressed. The proposed architecture separates a large fuzzy rule optimization problem into a series of more manageable and smaller problems through rule-table transformation. The algorithm is applied to the cart-pole system to demonstrate its characteristics     

Decreased antidiuretic response in diabetes insipidus during prolonged treatment with carbamazepine presumably due to enzym-induction

Carbamazepine (CA)-induced antidiuresis and fluorescence in urinary cortisol assay was compared during short-term and prolonged treatment in 3 patients with pituitary diabetes insipidus. The fluorescence induced by excreted CA-metabolite(s) (probably CA-10-11 epoxide and its derivatives) was used for the rough clinical estimation of the rate of metabolic elimination of the drug. A marked decrease was observed both in the antidiuretic response induced by CA and excretion of CA metabolite(s) during prolonged treatment - with a fixed dose of CA. These findings suggest that diminishing antidiuretic effectiveness might be due to auto-induction of CA. Auto-induction of CA may explain the delay in improvement of renal concentrating operation in patients with DI during long-term treatment with fixed doses of CA. Another clinical consequence of this mechanism may be the prevention of the development of water intoxication in neuro-psychiatric patients undergoing chronic treatment with CA.     

Aureole nanofibers by electrospinning of PAMAM‐PEO solution

Poly(amido amine) (PAMAM) dendrimer‐polyethylene oxide (PEO) nanofibers as dendrimeric‐polymeric composite nanofibers were prepared via electrospinning of PEO solution containing PAMAM dendrimer. The resultant fibers were characterized by means of transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The morphology and thermal properties of PEO nanofibers with and without PAMAM dendrimer were compared and the effect of PAMAM concentration on morphology and thermal properties of the resultant fibers was studied. The fibers had a size range of about 400–1300 nanometer in diameter with aureole morphology in most regions. The phase change temperature, phase transition heat, and the crystallinity of the produced composite fibers were determined by DSC analyses. TGA was also used to confirm the presence of PAMAM and to determine the amount of it within the fibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Pressureless sintering and mechanical properties of SiO2–Al2O3–MgO–K2O–TiO2–F (CaO–Na2O) machinable glass–ceramics

To develop a high strength machinable glass–ceramic through pressureless sintering, the glassy compositions were obtained by mixing a mica-based frit and a frit in the SiO₂–CaO–Na₂O system. According to XRD results, the glass compositions mainly crystallized into phlogopite and diopside after sintering. The optimum sintered glass–ceramic with desirable mechanical properties, machinability and sinterability was achieved by addition of 30 wt.% SiO₂–CaO–Na₂O glass powder to 70 wt.% mica glass composition. SEM results confirmed presence of needle-like diopside crystals which played a reinforcement role to the platelet phlogopite and glassy matrix combination. The measurements showed bending strength and fracture toughness enhanced up to 144.6 ± 17.6 MPa and 1.7 ± 0.2 MPa m^1/2, respectively.     

Seismic geomorphology and stratigraphic trap analyses of the Lower Cretaceous siliciclastic reservoir in the Kopeh Dagh-Amu Darya Basin

Lower Cretaceous Shurijeh–Shatlyk Formations host some of the main reservoirs in the Kopeh Dagh-Amu Darya Basin.Exploration in this area so far has focused on the development of structural traps, but recognition of stratigraphic traps in this area is of increasing importance. Integration of 3D seismic data with borehole data from thirteen wells and five outcrop sections was used to identify potential reservoir intervals and survey the hydrocarbon trap types in the East Kopeh Dagh Foldbelt(NE Iran). Analyses of horizontal slices indicated that the lower Shurijeh was deposited in a braided fluvial system.Generally, three types of channel were identified in the lower Shurijeh Formation: type 1, which is low-sinuosity channels interpreted to be filled with non-reservoir fine-grained facies; type 2, which is a moderately sinuous sand-filled channel with good prospectively; and type 3, which is narrow, high sinuosity channel filled with fine-grained sediments. Results indicate that upper Shurijeh–Shatlyk Formations were deposited in fluvial to delta and shallow marine environments. The identified delta forms the second reservoir zone in the Khangiran Field. Study of the stratigraphic aspects of the Shurijeh succession indicates that both lower and upper Shurijeh reservoirs are stratigraphic reservoir traps that improved during folding.