Experimental investigation of liquid–liquid flow in an inclined pipe using dimensionless numbers

Two-phase flow is a common phenomenon in the energy industry, where flow patterns significantly affect heat transfer and pressure drop in different systems. However, there is no unique or comparable flow map because of its dependency on dimensional parameters. Therefore, an analysis using dimensionless numbers makes the results comprehensive. To do so, a series of liquid–liquid flow experiments (1296 experiments) were conducted in a transparent pipe at the different velocities of the phases. The flow patterns were captured using a high-speed camera. The experiments were performed at eight different inclinations within the range of −20 to +20 degrees. Six flow patterns are observed at different inclinations; stratified flow with mixing at the interface (STMI), dispersion of water in oil (Dw/o), dispersion of oil in water (Do/w), dual continuous (DC), slug, and wavy stratified (WST), where the first five flow patterns are presented in the upward flow and the two last flow patterns disappear in some of the downward flow. The pattern of boundaries for each flow pattern in the upward flow shows dependency on inclination, while in the downward flow condition, a rather general format can be applied to most of the patterns. The analysis illustrates that gravity and buoyancy forces are the dominating forces in the system compared to other forces, such as viscous, inertia, and interfacial tension, which are due to the inclination of the pipe.     

Radiation crosslinked polyvinyl alcohol/polyvinyl pyrrolidone/acrylic acid hydrogels: swelling,crosslinking and dye adsorption study

Iranian Polymer Journal - Hydrogels were produced from mixtures of polyvinyl alcohol (PVA), polyvinyl pyrrolidone (PVP), and acrylic acid (AAc) using γ-radiation at doses of 3, 7, and...     

Photostabilization of ascorbic acid with citric acid, tartaric acid and boric acid in cream formulations

This study involves the evaluation of the effect of certain stabilizers, that is, citric acid (CT), tartaric acid (TA) and boric acid (BA) on the degradation of ascorbic acid (AH(2) ) in oil-in-water cream formulations exposed to the UV light and stored in the dark. The apparent first-order rate constants (0.34-0.95 × 10(-3) min(-1) in light, 0.38-1.24 × 10(-2) day(-1) in dark) for the degradation reactions in the presence of the stabilizers have been determined. These rate constants have been used to derive the second-order rate constants (0.26-1.45 × 10(-2) M(-1) min(-1) in light, 3.75-8.50 × 10(-3) M(-1) day(-1) in dark) for the interaction of AH(2) and the individual stabilizers. These stabilizers are effective in causing the inhibition of the rate of degradation of AH(2) both in the light and in the dark. The inhibitory effect of the stabilizers is in the order of CT > TA > BA. The rate of degradation of AH(2) in the presence of these stabilizers in the light is about 120 times higher than that in the dark. This could be explained on the basis of the deactivation of AH(2) -excited triplet state by CT and TA and by the inhibition of AH(2) degradation through complex formation with BA. AH(2) leads to the formation of dehydroascorbic acid (A) by chemical and photooxidation in cream formulations.     

Water Activity and Temperature Effects on Fungal Growth and Ochratoxin A Production by Ochratoxigenic Aspergillus carbonarius Isolated from Tunisian Grapes

ABSTRACT: This study investigated the effects of temperature (15 to 37 °C) and water activity (0.90 to 0.99) on the growth and production of ochratoxin A (OTA) by Aspergillus carbonarius cultured on synthetic nutrient medium (SNM) after 5 and 10 d of incubation. Total of 8 ochratoxigenic A. carbonarius, isolated from vineyards located in different regions of Tunisia, were used. Growth data were modeled by the flexible model of Baranyi and growth rates at each set of conditions were obtained. For both growth and OTA production, optimal water activity was 0.99; however, optimal temperature varied. The optimal temperature for growth was 30 °C. At 37 °C, the growth rate decreased significantly (P < 0.05). Maximum toxin production occurred at temperatures in the range of 15 to 25 °C with the optimum one depending on the isolate tested. Significant amounts of OTA were produced after only 5 d of incubation. Our results showed that A. carbonarius isolated from Tunisian grapes behave as those from European and Australian grapes, as reported in the literature, although some differences in trends for growth and OTA production were observed.     

Synthesis of Ion Imprinted Polymers by Copolymerization of Zn(II) and Al(III)8-hydroxy Quinolone Complexes with Divinylbenzene and Methacryclic Acid

In this research work, Zinc(II) and Aluminum(III)-IIP's were synthesized by optimizing the amount of methacrylic acid as monomer, divinylbenzene as cross-linker. The IIP's were functionalized with 8-hydroxy quinolone complexes of the two metal ions under thermal conditions by copolymerization with monomer and cross-linker. The IIP's and Non-IIP's were characterized using FT-IR, TGA, and SEM analysis. A quite remarkable difference in the size was observed of the polymers (Zn(II) 1.0 µm and Al(III) 0.1 µm). A stronger affinity was observed with IIP in comparison with Non-IIP at pH 3.1 and 4.5 for Zn(II) and Al(III) ions on their respective polymers.     

Nonlinear analysis and reliability of metallic truss structures

The present study goes into the search for the safety domain of civil engineering structures. The objective is to show how a reliability-evaluation brought by a mechanical sizing can be obtained. For that purpose, it is necessary to have a mechanical model and a reliability model representing correctly the behavior of this type of structure.It is a question on one hand, to propose a formulation for the nonlinear calculation (mechanical nonlinearity) of the spatial structures in trusses, and on the other hand, to propose or to adapt a formulation and a modeling of the reliability. The principle of Hasofer-Lind can be applied, in first approach, for the reliability index estimation, scenarios and the probability of failure.The made check concerned metallic in truss structures. Finally, some structures are calculated using the method adapted by Hasofer-Lind to validate the probability approach of the reliability analysis.     

Effect of Heat-Generating Solid Body on Mixed Convection Flow in a Ventilated Cavity

The mixed convection flow and heat transfer characteristics inside a square ventilated cavity with a heat-generating solid circular body located at the center have been investigated numerically. The inlet opening is at the bottom of the left wall, while the outlet one is at the top of the right wall, and all the walls of the cavity are considered to be adiabatic. A Galerkin weighted residual finite element method is used to solve the governing equations of mass, momentum, and energy. The behavior of the fluid in the ranges of dimensionless cylinder diameter from 0.1 to 0.6 of the heat generating body, thermal conductivity ratio range from 0.2 to 50 between solid and fluid, and heat generating parameter range from 1 to 5 is described in detail. The medium considered is air with a Prandtl number of 0.71. It is found that the flow and temperature field is strongly dependent on the already-mentioned parameters for the ranges considered. The variation of the mean Nusselt number, the dimensionless average drag force, and the average temperature of the fluid versus Richardson number are presented for these parameters.