The effect of polypropylene maleic anhydride on polypropylene/(recycled acrylonitrile butadiene rubber)/(sugarcane bagasse) composite

The effect of polypropylene maleic anhydride (PPMAH) on the tensile properties and morphology of polypropylene (PP)/(recycled acrylonitrile butadiene rubber) (NBRr)/(sugarcane bagasse) (SCB) composites has been studied. Six different composites (100/0/10, 80/20/10, 70/30/10, 60/40/10, 50/50/10, and 40/60/10), with fixed 5 wt% of PPMAH compatibilizer and without PPMAH addition, were carried out. The composites were prepared through melt‐mixing technique at 180^oC for 9 min using a rotor speed of 15 rpm. The specimens were analyzed for mechanical properties and examined with scanning electron microscopy. The tensile strength was found to decrease with increasing filler content. However, tensile strength and Young's modulus of the PPMAH compatibilized composites were found to increase, while the elongation at break showed the opposite trend as compared with the control composites. The morphology results support the tensile properties and indicated a better interaction between the SCB filler and PP/NBRr matrices with the presence of PPMAH as a compatibilizer. This is due to the esterification bonding between the SCB filler and PP matrix in the presence of PP/NBRr matrices. J. VINYL ADDIT. TECHNOL., 23:228–233, 2017. © 2015 Society of Plastics Engineers     

Superhydrophilic Transparent Titania Films by Supersonic Aerosol Deposition

Photocatalytic and hydrophilic TiO₂ thin‐film applications include water purification, cancer therapy, solar energy conversion, self‐cleaning devices, and antifogging windows. We demonstrate superhydrophilicity of aerosol‐deposition (AD) TiO₂ films on a glass substrate without use of a carrier solvent, thereby removing the possibility of impurity contamination. AD films exhibit high visible light transmittance (greater than 80%) and superhydrophilicity (0° contact angle) with even minimal UV‐light irradiation exposure. This AD method represents a significant step toward the realization of economically viable, functional thin films for the aforementioned applications.     

Colloidal Processing of Zirconium Diboride Ultra‐High Temperature Ceramics

Colloidal processing of the Ultra‐High Temperature Ceramic (UHTC) zirconium diboride (ZrB₂) to develop near?net‐shaping techniques has been investigated. The use of the colloidal processing technique produces higher particle packing that ultimately enables achieving greater densification at lower temperatures and pressures, even pressureless sintering. ZrB₂ suspension formulations have been optimized in terms of rheological behavior. Suspensions were shaped into green bodies (63% relative density) using slip casting. The densification was carried out at 1900°C, 2000°C, and 2100°C, using both hot pressing at 40 MPa and pressureless sintering. The colloidally processed materials were compared with materials prepared by a conventional dry processing route (cold pressed at 50 MPa) and subjected to the same densification procedures. Sintered densities for samples produced by the colloidal route are higher than produced by the dry route (up to 99.5% relative density by hot pressing), even when pressureless sintering is performed (more than 90% relative density). The promising results are considered as a starting point for the fabrication of complex‐shaped components that can be densified at lower sintering temperatures without pressure.     

Properties of Ferrite-Filled Natural Rubber Composites

Nickel zinc ferrite (Ni-ZnFe₂O₄)-filled natural rubber (NR) composite was prepared at various loading of ferrite. The tensile properties included in this study were tensile strength, tensile modulus and elongation at break. The tensile strength and elongation at break of the composites increased up to 40 parts per hundred rubber (phr) of ferrite and then decreased at higher loading whereas the tensile modulus was increased gradually with increasing of ferrite loading. Scanning electron microscopy (SEM) was used to determine the wettability of filler in rubber matrix. From the observation, the increase of filler loading reduced the wettability of the filler. Thermal stability of the composites was conducted by using a thermogravimetry analyser (TGA). The incorporation of ferrite in NR composites enhanced the thermal stability of NR composites. The swelling test results indicate that the swelling percentage of the composites decreased by increasing of ferrite loading. The initial permeability, μ_i and quality factor, Q of magnetic properties of NR composites achieved maximum value at 60 phr of ferrite loading for frequency range between 5000–40,000 kHz. The maximum impedance, Z _max of the NR composites was at the highest value at 80 phr ferrite loading for frequency range between 200–800 MHz.     

Low‐temperature photoinitiation solution polymerization behavior of N‐vinylcarbazole in tetrahydrofuran

N‐Vinylcarbazole (VCZ) was solution‐polymerized in tetrahydrofuran (THF) at ?20, 0, and 20°C using the photoinitiation method; the effects of the amount of solvent, polymerization temperature, and photoinitiator concentration were investigated. On the whole, the experimental results corresponded to predicted ones. Low polymerization temperature using photoinitiation proved to be successful in obtaining poly(N‐vinylcarbazole) (PVCZ) of a high molecular weight with a smaller temperature rise during polymerization; nevertheless of free radical polymerization by 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN). The photo‐solution polymerization rate of VCZ in THF was proportional to the 0.47 power of ADMVN concentration. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ prepared in THF at ?20°C using a photoinitiator concentration of 0.00005 mol/mol of VCZ, a weight‐average molecular weight of 510,000 was obtained, with a polydispersity index of 1.73, and a degree of lightness converged to about 99%. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3667–3672, 2002     

Apatite Induction on Ca-Containing Titania Formed by Micro-Arc Oxidation

Ca-containing, particularly CaTiO₃, titania films were prepared by micro-arc oxidation (MAO) of Ti in an electrolytic solution containing calcium acetate monohydrate (CA), and their apatite-inducing ability was evaluated in a simulated body fluid (SBF). The phase, Ca content, and morphology of the films were found to be strongly dependent on the applied voltage. The CaTiO₃-embedded titania was obtained at higher voltages (>300 V). When immersed in SBF, no apatite was induced in all the MAO specimens irrespective of the presence of CaTiO₃, which has been claimed to be an apatite inducer. However, after a hydrothermal treatment at 250°C, apatite was formed on the surfaces of the CaTiO₃-embedded titania after 28 days, which was closely related to the formation of amorphous Ca(OH)₂ and presumably surface Ti–OH groups.     

Freestanding fiber mats of zeolitic imidazolate framework 7 via one‐step,scalable electrospinning

We demonstrated the fabrication of freestanding zeolitic imidazolate framework 7 (ZIF‐7) nanofiber (NF) mats by means of one‐step, scalable electrospinning. The formation of ZIF‐7 nanoparticles embedded in polymer fibers was unambiguously pinpointed via X‐ray diffraction, transmission electron microscopy, and adsorption studies. The NF mats exhibited excellent characteristics, with an average diameter of 245 nm, in the adsorption and desorption of carbon dioxide (CO₂); this makes them attractive candidates for gas separation and other selective filtration applications. This excellent property of the ZIF‐7 mats was explained by the gate‐opening phenomenon of ZIF‐7, which yielded a stepwise increase in the overall CO₂ uptake capacity. The mechanical strength of the NF mats was also obtained via large‐strain uniaxial tensile deformation, which enabled preliminary assessment of the mat's suitability for textiles and membranes in targeting separation and filtration applications with large‐area permeability. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43788.     

PdO/Pd system equilibrium phase diagram under a gas mixture of oxygen and nitrogen

The thermal equilibrium decomposition properties of the PdO-Pd system under oxygen partial pressures ranging from 0.1 to 1.0 atm in a total combined pressure of oxygen and nitrogen of 1.0 atm were investigated by means of thermal-gravimetric analyses. The phase diagram of Pd-PdO over the range of oxygen/nitrogen gas concentration was established. The decomposition temperature of PdO to Pd was found to increase with the partial pressure of oxygen.     

Influence of Particle Velocity of Copper on Emitter Contact by Cold-Spray Method

In this study, we investigated cold-sprayed copper as a front contact for crystalline silicon solar cells. Copper powder was deposited on a monocrystalline silicon wafer with variation of the particle velocity during deposition. The particle velocity was varied by varying the heating temperature from 250 to 400 °C using a gas pressure of 0.45 MPa. The particle velocities were calculated using empirical equations, and were found to increase with an increase in the carrier gas temperature. Grid patterns were formed on a phosphorus-doped n-type emitter of a p-type silicon substrate. The electrode thickness increased with increasing particle velocity. The electrical properties of the grids were evaluated using the transfer length method. The specific contact resistance of the n-type emitter was in the range of 2.6-26.4 mΩ-cm². Damage to the p-n junction was investigated via minority carrier lifetime measurement of the substrate. The copper-silicon interface was evaluated using transmission electron microscopy. The contact properties were affected by the interface conditions.     

Corrosion Protection Properties of 4-[(E)-[(2,4-Dihydroxy phenyl)methylidene] amino]-6-methyl-3-sulfanylidene-2,3,4,5-tetrahydro-1,2,4-triazin-5-one [DMSTT] Toward Mild Steel in Sulfuric Acid

The inhibition of mild steel corrosion in aerated 0.5 N H₂SO₄ solution was investigated using potentiodynamic polarization studies (Tafel), linear polarization studies, electrochemical impedance spectroscopy studies, adsorption studies, and surface morphological studies. The effect of inhibitor concentration on corrosion rate, the effect of temperature, degree of surface coverage, adsorption kinetics, and surface morphology are investigated. The inhibition efficiency increased markedly with increase in the additive concentration and decreased slightly with increasing temperature. The presence of DMSTT decrease the double-layer capacitance and increase the charge transfer resistance. The value of activation energy (E _a) of metal corrosion, adsorption equilibrium constant (K _ads), and free energy of adsorption (ΔG _ads) were calculated from the temperature dependence of corrosion current. The adsorption of inhibitor molecule on mild steel surface follow Langmuir isotherm. DMSTT offers excellent inhibition properties and acts as a mixed-type inhibitor.