Design of dual‐band microstrip patch antenna with right‐angle triangular aperture slot for energy transfer application

This work focusing on the dual‐band antenna design with rectifying circuit for energy transfer system technology for enhancement gain performance. The air gap technique is applied on this microstrip antenna design work to enhance the antenna gain. The work begins with designing and analyzing the antenna via the CST Microwave Studio software. After validation on acceptable performance in simulation side is obtained, the return loss, S₁₁ of the antenna is measured using vector network analyzer equipment. The rectifier circuit is used to convert the captured signal to DC voltage. This projected dual‐band antenna has successfully accomplished the target on return loss of ?44.707 dB and ?32.163 dB at dual resonant frequencies for 1.8 GHz and 2.4 GHz, respectively. This proposed antenna design benefits in low cost fabrication and has achieved high gain of 6.31 dBi and 7.82 dBi for dual‐band functioning frequencies.     

Detecting pattern-based outliers

Outlier detection targets those exceptional data that deviate from the general pattern. Besides high density clustering, there is another pattern called low density regularity. Thus, there are two types of outliers w.r.t. them. We propose two techniques: one to identify the two patterns and the other to detect the corresponding outliers.     

Towards Designing a Trusted Routing Solution in Mobile Ad Hoc Networks

Designing a trusted and secure routing solution in an untrustworthy scenario is always a challenging problem. Lack of physical security and low trust levels among nodes in an ad hoc network demands a secure end-to-end route free of any malicious entity. This is particularly challenging when malicious nodes collude with one another to disrupt the network operation. In this paper we have designed a secure routing solution to find an end-to-end route free of malicious nodes with collaborative effort from the neighbors. We have also extended the solution to secure the network against colluding malicious nodes, which, to the best of our knowledge, is the first such solution proposed. We have also proposed a framework for computing and distributing trusts that can be used with out trusted routing protocol. Our proposed framework is unique and different from the other schemes in that it tries to analyze the psychology of the attacker and quantifies the behavior in the computational model. Extensive simulation has been carried out to evaluate the design of our protocol. Partially funded by Department of Defense Award No. H98230-04-C-0460, Department of Transportation Project No. FL-26-7102-00 and National Science Foundation Grant Nos. ANI-0123950 and CCR-0196557. Tirthankar Ghosh is a PhD candidate in the Telecommunications and Information Technology Institute at Florida International University. His area of research is routing security and trust computation in wireless ad hoc and sensor networks. He received his Bachelor of Electrical Engineering from Jadavpur University, India and Masters in Computer Engineering from Florida International University. Dr. Niki Pissinou received her Ph.D. in Computer Science from the University of Southern California, her M.S. in Computer Science from the University of California at Riverside, and her B.S.I.S.E. in Industrial and Systems Engineering from The Ohio State University. She is currently a tenured professor and the director of the Telecommunication & Information Technology Institute at FIU. Previously Dr. Pissinou was a tenured faculty at the Center for Advanced Computer Studies at the University of Louisiana at Lafayette where she was also the director of the Telecommunication & Information & Technology Laboratory partially funded by NASA, and the co-director of the NOMAD: A Wireless and Nomadic Laboratory partially funded by NSF, and the Advanced Network Laboratory. Dr. Pissinou is active in the fields computer networks, information technology and distributed systems. Dr. Kami (Sam) Makki has earned his Ph.D. in Computer Science from the University of Queensland in Brisbane Australia, his Masters degree in Computer Science and Engineering from the University of New South Wales in Sydney Australia, and his Bachelor and Masters Degrees in Civil Engineering from the University of Tehran Iran. Before joining the department of Electrical Engineering and Computer Science at the University of Toledo he has held a number of academic positions and research appointments at the Queensland University of Technology in Brisbane, Royal Melbourne Institution of Technology in Melbourne and at The University of Queensland in Brisbane Australia. He is an active researcher in the fields of distributed systems, databases, mobile and wireless communications, and has more than 30 publications in peerreviewed journals and international proceedings. He has served as a chair and technical program committee member and reviewer for a number of IEEE and ACM sponsored technical conferences and has received a number of achievement awards.     

NUMERICAL MODELING OF SUSPENDED SEDIMENT TRANSPORT IN CHANNEL BENDS

1. INTRODUCTION Due to the fact that three-dimensional (3D) numerical models are quite expensive to simulate flow and sediment transport processes, vertically-integrated two-dimensional (2D) models are extensively applied at present, even to the predictio…     

Supersonic Nozzle Flow Simulations for Particle Coating Applications: Effects of Shockwaves,Nozzle Geometry,Ambient Pressure,and Substrate Location upon Flow Characteristics

Characteristics of supersonic flow are examined with specific regard to nano-particle thin-film coating. Effects of shockwaves, nozzle geometry, chamber pressure, and substrate location were studied computationally. Shockwaves are minimized to reduce fluctuations in flow properties at the discontinuities across diamond shock structures. Nozzle geometry was adjusted to ensure optimal expansion (i.e., P _exit = P _ambient), where shock formation was significantly reduced and flow kinetic energy maximized. When the ambient pressure was reduced from 1 to 0.01316 bar, the nozzle’s diverging angle must be increased to yield the optimum condition of minimized adversed effects. Beyond some critical distance, substrate location did not seem to be a sensitive parameter on flow characteristics when P _amb = 0.01316 bar; however, overly close proximity to the nozzle exit caused flow disturbances inside the nozzle, thereby adversely affecting coating gas flow.     

Detection of Axial Cracks in Pipes Using Focused Guided Waves

The implementation of synthetic guided wave focusing to locate axially aligned defects in pipes has been investigated. Results from both finite element computer models and experiments on real pipes are presented and the data show good agreement. Focusing is necessary to improve the reflection coefficient from axially aligned defects, as the signals are very weak. The Common Source Method (CSM) of synthetic focusing has been applied which makes it possible to apply focusing via post processing to previously collected data. The dependence of reflection coefficient on crack length was measured for both through thickness and part depth axially aligned defects, at a range of frequencies, using the torsional guided wave family. The results show that the reflection coefficient is approximately doubled when focusing is employed, compared to the sensitivity for unfocused fundamental torsional waves. However the sensitivity is still very low, so in practise this approach could only be used to find severe defects.     

半开放式的负体积设计

当你在网络上搜索“负体积”这个词条的时候也许会出现这样的说法：“负体积是由于元素本身产生很大的变形而造成自我体积的内面跑到外面,或是外面跑到内面。”如何在负体积的承载方式上建立不一样的生活姿态,这是h2o的建筑师要告诉我们的。     

丝滑从手中陷落

“心随心动,愉悦丝滑。愉悦随时随地,尽享心灵随时随地的愉悦。”——原本巧克力的广告语此时借来形容nendo办公室并不为过,原木的清新,手中的陷落,让这“丝滑”充斥放大,办公室游戏在设计中展开。