CFD Modeling of Air Flow on Wall Deposition in Different Spray Dryer Geometries

Wall deposition is one of the most conventional problems in the spray drying process. The operation of a spray dryer is affected by the wall deposition fluxes inside the equipment. In this study, computational fluid dynamic (CFD) simulation was used to investigate the effect of spray dryer geometry on wall deposition. A CFD model was developed for different geometries of spray dryer with a conical (case A) or a parabolic (cases B and C) bottom. The results implied that the parabolic geometry resulted in a lower deposition rate on the spray dryer walls. A comparison of results using the P-values (F-test) of the air velocity, in the conical and parabolic geometries, showed that there was a significant difference in air stability between them. The flow field in conical geometry case A was significantly more unstable, and parabolic geometry case C produced the most uniform airflow patterns. Moreover, the higher wall shear stress in case C, with lower values of the vorticity, would result in less wall deposition.     

Immobilized iron Schiff base histidine complexes on Al-MCM-41 and zeolite Y as catalyst for oxidation of cycloalkanes

Iron complexes of N-salicylidene-l-histidine with or without bipyridine ligand immobilized on Al-MCM-41 and zeolite Y designated as Fe(sal-l-his)(bipy)complex/Al-MCM-41 or Fe(sal-l-his)complex/Al-MCM-41 and Fe(sal-l-his)(bpy)complex/Y or Fe(sal-l-his)complex/Y respectively, were prepared and characterized by X-ray powder diffraction (XRD), FT-IR, N₂ adsorption/desorption and chemical analysis techniques. Fe(sal-l-his)/Al-MCM-41 and Fe(sal-l-his)(bipy)complex/Al-MCM-41 were found to successfully catalyze the oxidation of cyclohexane, methyl cyclohexane, cyclooctane and adamantane with H₂O₂. The oxidation results and promising catalytic behavior of Fe(sal-l-his)(bipy)complex/Al-MCM-41 for oxidation of cyclooctane with 90 % conversion and excellent selectivity toward the formation of cyclooctanone will be discussed in this presentation.     

Investigation on production and characterization of bionanocomposites based on surface functionalized multi-walled carbon nanotubes and optically active poly(ester-imide) having L-isoleucine units

Carboxylic functionalized multi-walled carbon nanotubes (MWCNTs) have been incorporated to biodegradable poly(ester-imide) (PEI) matrix and the effect of the carboxylated-MWCNT on the thermal and morphological properties of MWCNT-reinforced bionanocomposites (BNCs) was demonstrated. Chiral PEI was synthesized from a step-growth polymerization of amino acid based diacid (4) with 4,4′-thiobis(2-tert-butyl-5-methylphenol) (5) promoted by tosyl chloride in pyridine and N,N-dimethyl formamide solution. The resulting BNCs were analyzed by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The homogeneous dispersion of MWCNTs throughout PEI matrix and strong interfacial adhesion between them were achieved in the obtained BNCs as evidenced by FE-SEM and TEM images. The results from TGA indicated that the thermal stability of the resulting BNCs was obviously improved in comparison with the pure PEI.     

Micromorphology and Optical Bandgap Characterization of Copper Oxide Nanowires

Due to the industrial applications of nasno materials, the growth of Copper oxide (CuO) nanowires (NWs) at the same and opposite directions of the electric and gravitational fields was investigated to study the effects of fields on the NWs properties. The experiments were designed to grow NWs using thermal oxidation method at 450 ^°C for 50 h. NWs growth was evaluated to study two distinct cases; first, substrates exposed to the gravitational field and second those treated with electric field (EF) in-lined with gravitation field (GF). It was observed that the electric field developed a diameter homogeneity while compressing the NWs and decreasing the diameters. Furthermore, the GF influenced only the length of the NWs, while the EF had an impact on both length and diameter of the NWs. The direction of fields played an important role in NWs morphology and intensity of XRD pattern and optical properties. It was also observed that field direction greatly influenced the NWs length and diameter.     

Synthesis and characterization of cobalt-free Ba0.5Sr0.5Fe0.8Cu0.2O3−δ perovskite oxide cathode nanofibers

The cobalt-free perovskite-oxide, Ba_0.5Sr_0.5Fe_0.8Cu_0.2O_3−δ (BSFC) is a very important cathode material for intermediate-temperature proton-conducting solid oxide fuel cells. Ba_0.5Sr_0.5Fe_0.8Cu_0.2O_3−δ nanofibers were synthesized for the first time by a sol-gel electrospinning. Process wherein a combination of polyvinylpyrrolidone and acetic acid was used as the spinning aid and barium, strontium, iron and copper nitrates were used as precursors for the synthesis of BSFC nanofibers. X-ray diffraction studies on products prepared at different calcination temperatures revealed a cubic perovskite structure at 900 °C. The temperature of calcination has a direct effect on the crystallization and surface morphology of the nanofibers. High porosity, and surface area, in addition to an electrical conductivity of 69.54 S cm⁻¹ at 600 °C demonstrate the capability of BSFC nanofibers to serve as effective cathode materials for intermediate-temperature solid oxide fuel cells.     

Application of Dispersive Liquid–Liquid Micro-extraction Using Mean Centering of Ratio Spectra Method for Trace Determination of Mercury in Food and Environmental Samples

In the present study, dispersive liquid–liquid micro-extraction has been applied for trace extraction and determination of mercury (Hg) ions in environmental samples. The mean centering of ratio spectra method was used to optimize the experimental parameters affecting the extraction of Hg. The factors influencing the extraction procedure such as type and volume of extracting and disperser solvent, concentration of chelating reagent, pH, salt effect, and centrifuge time were investigated and optimized. Under the optimized conditions, the limit of detection of the method was 0.15 μg l^?1 and enrichment factor was 39. The calibration curve was linear in the range of 0.5–100 μg l^?1 with a correlation of determination (R ²) of 0.998. The relative standard deviation for determination of 40 μg l^?1 of Hg(II) was 2.6 % (n?=?5). The proposed method was applied for the determination of Hg in pine leaf, sea and river fish, sand, and water samples as indicators of environmental pollution and cigarette with satisfactory analytical results. In comparison with other methods, the proposed method is very simple, easy, rapid, and sensitive for determination of Hg at trace levels in complex matrices.