To develop standards for distinguishing antiarrhythmic drug effect from spontaneous variability of premature ventricular complexes (PVCs), 21 males (mean age 56 +/- 8 years) with chronic ischemic heart disease and PVCs underwent symptom-limited treadmill exercise testing and 24-hour ambulatory monitoring before and after 2 weeks of placebo medication. Linear regression analysis was used to describe the relationship between baseline and placebo PVC frequency for various indexes of ventricular ectopic activity and to establish 95% and 99% one-tailed confidence intervals for this relationship within the group of 21 patients. The lower limit of baseline PVC frequency for which the procedure could distinguish a placebo from a true drug response, termed the "sensitivity threshold," was an average frequency of 2.2 PVCs/hour for ambulatory electrocardiographic monitoring and 1.2 PVCs/min for treadmill exercise testing. All patients exceeded the sensitivity threshold on baseline ambulatory ECGs, but only 38% of patients did so on baseline treadmill exercise tests. To establish antiarrhythmic efficacy with 95% confidence, the minimal percent reduction of PVCs between baseline and placebo visits was 68% for treadmill exercise testing and 65% for ambulatory electrocardiography. Although these standards were developed in patients with chronic ischemic heart disease, the model can be used to establish antiarrhythmic drug efficacy in any patient group. 相似文献
This study investigates pre-service teachers' perspectives of the diffusion of information and communication technologies (ICTs) in elementary education and the effect of case-based discussions (CBDs). The sample consisted of 170 first-year pre-service teachers from elementary teacher education programs of the largest teacher education college in Turkey. The cases used in the study were obtained from a case repository at http://ornekolay.org, indexing teaching cases from elementary classrooms of the capital city of Turkey. The cases were mainly text-based and presented stories of elementary teachers' in-class usage of ICTs. A quasi-experimental pretest-posttest design was executed to test the effect of pre-service teachers' perspectives on ICTs diffusion in elementary teaching. Three scales were developed based on Rogers' Diffusion of Innovation Theory (2003) to measure pre-service teachers' preferred innovativeness, innovation perceptions, and innovation decisions in the use of ICTs. The results showed that pre-service teachers had pre-established perspectives, mainly positive, about the diffusion of ICTs in elementary teaching; their perceptions about innovativeness and relative advantage were the main indicators of persuasion and decision; and CBDs positively affected their perceptions such that their computer-related persuasion and decisions positively increased. 相似文献
The flow control problem in multi-part failure prone manufacturing systems is considered. While computationnaly attractive, the near optimal controllers of Caramanis and Sharifnia, suffer from the drawback that the production capacity set must be approximated via a very restricted set of inscribed hypercubes, namely those for which a componentwise feasibility requirement is satisfied. Also, due to the completely decoupled nature of production along each component, utilization of the restricted capacity set is suboptimal. A class of capacity set incribed hypercube policies called simple maximal hedging (SMH) policies is introduced. In SMH policies production levels along the various components of the capacity set are coupled, the componentwise feasibility requirement is lifted, and there is no underutilization of production capacity if needed. In a p part types manufacturing system, for partwise additive cost functionals, it is shown that performance evaluation of a given SMH policy reduces to the analysis of p decoupled (fictitious) semi-Markovian machines. The machines are Markovianized via first passage-time analysis and a Padé approximants technique. Numerical optimization over the class of SMH policies in a sample manufacturing system indicates that their performance can come close to that of the optimal control. 相似文献
Abstract: A very simple method is proposed to produce hydroxytyrosol, a commercially unavailable compound with well‐known biological properties which justify a potential commercial application. The 2‐phase Chemlali olive pomace is selected as substrate for chemical treatment. Different conditions of chemical treatment, including concentration of acid and alkaline solutions, time and temperature, were assayed. A high amount of hydroxytyrosol (1360 mg/kg of fresh 2‐phase olive pomace) was obtained using water bath after treatment at 80 °C for 90 min with 1 M of H3PO4. However, treatment of 2‐phase Chemlali olive pomace using autoclave apparatus could produce a large amount of hydroxytyrosol (1993.60 and 1515.88 mg/kg of fresh alperujo, 1 M acid and basic catalyst, respectively). By taking into consideration practical and economic aspects, acid‐catalyzed treatment was more effective using autoclave conditions, whereas the alkali catalyzed conditions were not very suitable. This study could provide useful information for industry to produce the potentially bioactive compound. Practical Application: The 2‐phase Chemlali olive pomace is selected as substrate for chemical treatment. Treatment of “alperujo” using water bath or autoclave apparatus was carried out. A high amount of hydroxytyrosol was obtained using autoclave apparatus. 相似文献
Image registration, accuracy, processing time and occlusions are the main limitations of augmented reality (AR) based jaw surgery. Therefore, the main aim of this paper is to reduce the registration error, which will help in improving the accuracy and reducing the processing time. Also, it aims to remove outliers and remove the registration outcomes trapped in local minima to improve the alignment problems and remove the occlusion caused by surgery instrument. The enhanced Iterative Closest Point (ICP) algorithm with rotation invariant and correntropy was used for the proposed system. Markerless image registration technique was used for AR-based jaw surgery. The problem of occlusion caused by surgical tools and blood is solved by using stereo based tracing with occlusion handling techniques. This research reduced alignment error 0.59 mm?~?0.62 mm against 0.69?~?0.72 mm of state-of-the-art solution. The processing time of video frames was enhanced to 11.9?~?12.8 fps against 8?~?9.15 fps in state-of-the-art solution. This paper is focused on providing fast and accurate AR-based system for jaw surgery. The proposed system helps in improving the AR visualization during jaw surgery. The combination of methods and technology helped in improving AR visualization for jaw surgery and to overcome the failure caused by a large rotation angle and provides an initial parameter for better image registration. It also enhances performance by removing outliers and noises. The pose refinement stage provides a better result in terms of processing time and accuracy.
Communication systems are needed to integrate generated power from wind farms with the electrical grid. This paper provides a comprehensive review of available communication technologies, protocols and objectives related to wind energy and electrical grid integration. This paper summarizes the communication system solutions for wind generation. A major obstacle is an absence of unified communication architectures and standards. 相似文献
This study was conducted to synthesize poly(L-lactide)–poly(ethylene glycol)–poly(L-lactide) triblock copolymer (PEGLA) with different poly(L-lactide) block length, and explore its applicability in a blend with linear poly(L-lactide) (3051D NatureWorks) with the intention of improving heat seal and adhesion properties at extrusion coating on paperboard. Poly(L-lactide)–poly(ethylene glycol)–poly(L-lactide) was obtained by ring opening polymerization of L-lactide using poly(ethylene glycol) (molecular weight 6000 g mol?1) as an initiator and stannous octoate as catalyst. The structures of the PEGLAs were characterized by proton nuclear magnetic resonance spectroscopy. The melt flow and thermal properties of all PEGLAs and their blends were evaluated using dynamic rheology and differential scanning calorimeter. All blends containing 10 wt% of PEGLAs displayed similar zero shear viscosities to neat poly(L-lactide), while blends containing 30 wt% of PEGLAs showed slightly higher zero shear viscosity. However, all blends displayed higher shear thinning and increased melt elasticity (based on tan δ). No major changes in thermal properties were distinguished from differential scanning calorimetric studies. High molecular weight PEGLAs could be used in extrusion coating with 3051D without problems. 相似文献
This paper is focused on the estimation of the effect of root pass chemical composition, in multi-pass GTA Weldments, on microstructure and mechanical properties of duplex stainless steel welds. We used two different filler metals, the super duplex ER 2594 and duplex ER 2209. Microstructures of different passes of welded joints are investigated using optical microscope and scanning electron microscope. The relationship between mechanical properties, corrosion resistance, and microstructure of welded joints is evaluated. It is found that the tensile and toughness properties of the first weldment, employing the combination of ER 2594 in the root pass and ER 2209 in the remaining, are better than that of the second weldment employing ER 2209 all passes, due to the root pass grains refinement and its alloy elements content as chromium Cr and nitrogen N. The microstructure indicates the presence of austenite in different forms on the weld zone of ER 2209, same in the case of ER 2594, but with higher content and finer grains size, in particular Widmanstätten austenite WA. Potentiodynamic polarization tests of the first weld metal evaluated in 3.5% NaCl solution at room temperature have been demonstrated a corrosion resistance higher than that of the second weld metal. This work addressed the improvement of the corrosion resistance using appropriate filler metal without getting any structural heterogeneity and detrimental changes in the mechanical properties. 相似文献