Dynamic Modeling and a Parametric Study of an Indirect Solar Cabinet Dryer

A dynamic mathematical model for drying of agricultural products in an indirect cabinet solar dryer is presented. This model describes the heat and mass transfer in the drying chamber and also considers the heat transfer and temperature distribution in a solar collector under transient conditions. For this purpose, using conservation laws of heat and mass transfer and considering the physical phenomena occurring in a solar dryer, the governing equations are derived and solved numerically. The model solution provides an effective tool to study the variation of temperature and humidity of the drying air, drying material temperature, and its moisture content on each tray. The predicted results are compared with available experimental data. It is shown that the model can predict the performance of the cabinet solar dryer in unsteady-state operating conditions well. Furthermore, the effect of some operating parameters on the performance and efficiency of dryer is investigated and compared with selected published data.     

Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (~10 nm). With silver addition, small spherical silver metal particles (~2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism.     

Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating

This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations.     

Copper activated LiF nanorods as TLD material for high exposures of gamma-rays

Lithium fluoride (LiF) doped with proper activators is a highly sensitive phosphor commonly used for radiation dosimetry using thermoluminescence (TL) technique. Nanorods of this material activated with Cu, Mg and P as single dopants are synthesized in our laboratory and exposed to gamma-rays for their thermoluminescence (TL) properties. The induced TL glow curves of the Cu, Mg and P doped samples are similar with a single peak at 410 K. Copper doped sample is found to be the most sensitive sample with TL intensity around 65, 7 and 8 times of those of LiF:Mg, LiF:P and LiF:Mg,Cu,P, respectively, indicating that Cu is the luminescence center in the host of LiF nanorods, while Mg and P act as TL quencher particularly when used as codopants. These observations on the nanostructured form of LiF doped with these activators are entirely different from those of the widely studied LiF:Mg,Cu,P and LiF:Mg,Ti single crystals. The nanorods of LiF:Cu might be used for heavy doses measurement as they are sensitive to gamma-rays and have a linear TL response curve in a long span of exposures.     

Performance of different fermentation methods and the effect of their duration on the quality of raw cocoa beans

This study aims to compare the effect of three cocoa fermentation methods and their duration on raw cocoa quality. Results showed a decrease in percentage of physical quality defects on fermentation method. Cocoa fermented for 4 days presented higher percentage of purple beans reached 45% and about 10% of slaty beans than cocoa fermented for 6 days whatever the process. Fermentation duration did not influence the mouldy beans that were around 1%. Formation of brown beans increased from 16% to 50% depending on the fermentation duration and process. Using wooden boxes allowed higher percentage of 77%–90% brown beans than others materials. Acidity of cocoa decreased on fermentation duration but beans treated in boxes were significantly (P = 0.05) acidic from 1.40 and 3.07 meq of NaOH g^?1. Fungal population did not vary in number depending both on the duration and the fermentation method with rates that ranged from 3.32 × 10⁷ to 8.63 × 10⁷ CFU g^?1.     

Performance Analysis and Optimization Based on Adaptive Modulation and Chaotic Interleaving for Helicopter-Satellite Communications

Overcoming periodic blockage of the received signal and the carrier frequency fluctuations caused by rotor blades and Doppler shift, respectively, are considered the most challenging issues in helicopter-satellite communication systems. In this study, we propose an automatic frequency control method based on an adaptive modulation scheme. We employ a hybrid modulation not only depending on quadrature phase shift keying, but also based on binary phase shift keying for accurate cancellation of periodic blockage. On the other hand, we apply a chaotic interleaving scheme with a hybrid modulation scheme in order to achieve a better Bit Error Rate (BER) performance in LOS and NLOS environments. Finally, we validate the mathematical analysis of the proposed scheme through simulations. We evaluated the performance of the proposed scheme and performed a comparison with conventional schemes. Our results show that the proposed scheme is significantly capable of reducing the acquisition time and working with various velocities of helicopter blades in addition to providing a better BER performance in shadow fading environments.     

A state machine approach in modelling the heating process of a building

Process models and their applications have gradually become an integral part of the design, maintenance and automation of modern buildings. The following state machine model outlines a new approach in this area. The heating power described by the model is based on the recent inputs as well as on the past inputs and outputs of the process, thus also representing the states of the system. Identifying the model means collecting, assorting and storing observations, but also effectively utilizing their inherent relationships and nearest neighbours. The last aspect enables to create a uniform set of data, which forms the characteristic, dynamic behaviour of the HVAC process. The state machine model is non-parametric and needs no sophisticated algorithm for identification. It is therefore suitable for small microprocessor devices equipped with a larger memory capacity. The first test runs, performed in a simulated environment, were encouraging and showed good prediction capability.     

A Capacitor Voltage Clamped Dual Half-Bridge Series-Resonant Inverter for Home Cooking Applications

An induction heating appliance used for cooking includes more than one inductor, each being controlled by a separate inverter system. The main aim of this paper is to control each coil separately at a different frequency and power output by using the same inverter system. A working coil of two parts has been designed practically and a computer simulation has been carried out, using practical coil parameters. Each part of the coil has been operated at a different frequency and power output, which allows the use of vessels of two different diameters while obtaining a high coupling factor for both conditions. This also increases the efficiency of the system and improves power quality. The proposed topology can be applied to induction hotplates made up of several inductors in which the power and frequency must be separately regulated.     

Axial Compression of Footings in Cohesionless Soils. II: Bearing Capacity

An extensive database of full-scale field load tests was used to examine the bearing capacity for footings in cohesionless soils. Each load test curve was evaluated consistently to determine the interpreted failure load (i.e., bearing capacity) using the L1-L2 method. This test value then was compared with the theoretical bearing capacity, computed primarily using the basic Vesi? model. The comparisons show that, for footing widths B>1?m, the field results agree very well with the Vesi? predictions. However, for B<1?m, the results indicated a relationship between B and the predicted-to-measured bearing capacity ratio. Accordingly, a simple modification was made to the bearing capacity equation, and the resulting predictions are very good.     

Thermal comfort and use of thermostats in Finnish homes and offices

Thermal comfort and use of thermostats in homes and office rooms were examined by a quantitative interview survey with a nationally representative sample in Finland. The total number of respondents was 3094. The results show that thermal comfort levels are lower in offices than in homes. People feel cold and hot more often in offices than in homes during both the winter and summer seasons. The perceived control over room temperature is remarkably low in offices. Higher thermal comfort levels and perceived control in homes are supported by greater adaptive opportunities. In offices people have fewer opportunities to control the thermal environment, people deal worse with thermostats, and people have lower opportunities to adapt to different thermal environments.