Peptides released from acid goat whey by a yeast-lactobacillus association isolated from cheese microflora

Seven lactobacilli and a variety of microflora extracted from twenty five commercial cheeses were grown on unsupplemented acid goat whey and screened for their capacity to hydrolyse whey proteins [alpha-lactalbumin (alpha-la) and beta-lactoglobulin (beta-lg)] and to generate peptides. Fermentations were performed aerobically or anaerobically at 37 degrees C using crude or pre-heated whey (10 min at 65, 75 or 85 degrees C). Under aerobic conditions, growth of lactobacilli was poor and protein hydrolysis did not occur. Anaerobic conditions slightly increased lactobacilli growth but neither beta-lg hydrolysis nor peptide generation were observed. More than 50% of alpha-la was digested into a truncated form of alpha-la (+/- 12 kDa) in crude whey and whey pre-heated at 65 degrees C. Twenty-five microflora extracted from raw milk cheeses were screened for their proteolytic activities on acid goat whey under the conditions previously described. Eight of them were able to hydrolyse up to 50% of alpha-la mainly during aerobic growth on crude or pre-heated whey. The corresponding hydrolysates were enriched in peptides. The hydrolysate involving microflora extracted from Comté cheese after or at 18 months ripening was the only one to exhibit hydrolysis of both alpha-la and beta-lg. Microbiological analysis showed that microorganisms originating from Comté cheese and capable of growth on unsupplemented whey consisted of Candida parapsilosis and Lactobacillus paracasei. Fermentation kinetic profiles suggested that peptides were released from alpha-la hydrolysis. The co-culture of both microorganisms was required for alpha-la hydrolysis that occurred concomitantly with the pH decrease. During whey fermentation, Cand. parapsilosis excrete at least one protease responsible for alpha-la hydrolysis, and Lb. paracasei is responsible for medium acidification that is required for protease activation.     

Biomarker versus environmental factors: seasonal variations and modelling multixenobiotic defence (MXD) transport activity in transplanted zebra mussels

The occurrence of biomarker temporal variations linked to environmental factors makes it difficult to distinguish the specific effect of pollution. The present work aims to investigate the seasonal variations of the transport activity of the multixenobiotic defence (MXD), which is used as a biological tool for the monitoring of pollution in aquatic ecosystems. The MXD transport activity was monitored monthly from August 2001 to October 2002 in zebra mussels (Dreissena polymorpha) transplanted to three sites in the Moselle River. The 'efflux method' was used to evaluate functional activity of MXD by assessing rhodamine B efflux with or without an inhibitor (verapamil). Environmental parameters were provided by a French regulatory agency (Water Agency) that monitors river water quality. The results of a principal components analysis describe the seasonal cycle of water characteristics and demonstrate that MXD activity is subjected to significant temporal variations. These data were described with a generalised linear model that enables it to link MXD variability to the seasonal variations of environmental parameters such as temperature or levels of organic contamination. This work proposes a modelling approach and highlights that the occurrence of seasonal variations in MXD response has to be taken into account in the interpretation of in situ monitoring studies.     

Li, Cr, Mn, Co, Ni, Cu, Zn, Se and Mo levels in foodstuffs from the Second French TDS

In 2006, the French Food Safety Agency (AFSSA) conducted the Second French Total Diet Study (TDS) to estimate dietary exposures to the main minerals and trace elements from 1319 samples of foods typically consumed by the French population. The foodstuffs were analysed by inductively coupled plasma-mass spectrometry (ICP-MS) after microwave-assisted digestion. Occurrence data for lithium, chromium, manganese, cobalt, nickel, copper, zinc, selenium and molybdenum were reported and compared with results from the previous French TDS. The results indicate that the food groups presenting the highest levels of these essential trace elements were “tofu” (for Li, Mn, Ni, Cu, Zn and Mo),“fish and fish products” particularly “shellfish” (for Li, Co, Cu, Zn, Se and Mo), “sweeteners, honey and confectionery” particularly dark chocolate (for Cr, Mn, Co, Ni and Cu), “cereals and cereal products” (for Mn, Ni and Mo) and “ice cream” (for Cr, Co and Ni).     

Preservation of the negative image of tooth enamel with dental impression material enhances morphometric measurements of gingival overgrowth

Gingival overgrowth is a common health problem caused by genetic and environmental risk factors. Animal models for quantitative histological studies are needed to uncover genetic predisposition and dose-response data that might put individuals at increased risk for gingival disease. Gingival height, thickness, inflammation, and the degree of encroachment of gingiva over the tooth, are clinical measures of overgrowth; most of these parameters can be measured histologically, but in order to quantify gingival coverage of the tooth, the image of the crown must be present. Tooth and bone typically require decalcification for histology; thus, the tooth crown, a critical landmark, is lost. We describe a method for imaging the crown histologically, using impression materials applied to dissected mouse mandibles. Four dental alginates, three polyvinyl siloxanes, and one polyether and gelatin were used. The impression-material/mandibular tissue blocks were processed routinely. Polyvinyl siloxanes were incompatible with embedding resin; alginates, polyether and gelatin could be fixed, decalcified, embedded, and sectioned. Alginates and gelatin could be stained. Success in imaging the tooth crown varied with the preparation, but the alginates, polyether, and gelatin permitted a useful degree of measurement of exposed crown and enamel thickness, along with other morphometric parameters such as thickness of the dentin, lateral mandibular ramus, rete pegs, height of the gingiva, and volume density of vessels and inflammatory cells in the lamina propria. In conclusion, this new application for impression materials allows gingival coverage of tooth crown, as well as numerous other parameters to be measured for comparison with clinical data.     

Poly(β-malic acid) derivatives with non-charged hydrophilic lateral groups: synthesis and characterization

Summary Poly((3-hydroxypropyl β malate) has been synthesized starting from aspartic acid and benzyloxy-1-propanol as precursors. This new polymer was characterized by ¹H and ¹³C NMR, size exclusion chromatography and differential scanning calorimetry. Homopolymer is soluble in water. Two kinds of amphiphilic copolymers were also prepared and characterized. Such polymers have been synthesized with a view to preparing non-charged degradable associating networks or drug carriers. Received: 14 Juni 1999/Revised version: 23 September 1999/Accepted: 14 October 1999     

Hydrogenated amorphous silicon p–i–n solar cells deposited under well controlled ion bombardment using pulse‐shaped substrate biasing

We applied pulse‐shaped biasing (PSB) to the expanding thermal plasma deposition of intrinsic hydrogenated amorphous silicon layers at substrate temperatures of 200 °C and growth rates of about 1 nm/s. Fourier transform infrared spectroscopy of intrinsic films showed a densification with increasing deposited energy and a reduction in void content, whereas dual‐beam photoconductivity measurements showed an increase in Urbach energy above 4.8 eV/Si atom. From dark conductivity and photoconductivity measurements, we determined a maximum photoresponse of 2 × 10⁶ at 3 eV/Si atom, which decreased at higher deposited energies because of a higher dark conductivity as a result of a lower band gap. p–i–n solar cells with PSB applied during the intrinsic layer deposition showed initial energy conversion efficiencies of 7.4% at around 1 eV/Si atom. Decreasing open‐circuit voltage at >1 eV/Si atom can be related to a lower band gap, whereas the short‐circuit current drops at >4.8 eV/Si atom, predominantly because of hole collection losses as determined from quantum efficiency measurements. The reduced fill factor for >1 eV/Si atom was presumably related to a decrease in mobility‐lifetime product because of an increase in defect density. Copyright © 2011 John Wiley & Sons, Ltd.