Smad3 Deficiency Ameliorates Hepatic Fibrogenesis through the Expression of Senescence Marker Protein-30, an Antioxidant-Related Protein

Smad3 is a key mediator of the transforming growth factor (TGF)-β1 signaling pathway that plays central role in inflammation and fibrosis. In present study, we evaluated the effect of Smad3 deficiency in Smad3^−/− mice with carbon tetrachloride (CCl₄)-induced liver fibrosis. The animals were received CCl₄ or olive oil three times a week for 4 weeks. Histopathological analyses were performed to evaluate the fibrosis development in the mice. Alteration of protein expression controlled by Smad3 was examined using a proteomic analysis. CCl₄-induced liver fibrosis was rarely detected in Smad3^−/− mice compared to Smad3^+/+. Proteomic analysis revealed that proteins related to antioxidant activities such as senescence marker protein-30 (SMP30), selenium-binding proteins (SP56) and glutathione S-transferases (GSTs) were up-regulated in Smad3^−/− mice. Western blot analysis confirmed that SMP30 protein expression was increased in Smad3^−/− mice. And SMP30 levels were decreased in CCl₄-treated Smad3^+/+ and Smad3^−/− mice. These results indicate that Smad3 deficiency influences the proteins level related to antioxidant activities during early liver fibrosis. Thus, we suggest that Smad3 deteriorate hepatic injury by inhibitor of antioxidant proteins as well as mediator of TGF-β1 signaling.     

Lu3+/Yb3+ and Lu3+/Er3+ co-doped antimony selenide nanomaterials: synthesis,characterization, and electrical,thermoelectrical, and optical properties

Lu³⁺/Yb³⁺ and Lu³⁺/Er³⁺ co-doped Sb₂Se₃ nanomaterials were synthesized by co-reduction method in hydrothermal condition. Powder X-ray diffraction patterns indicate that the Ln_xLn^′_xSb_2−2xSe₃ Ln: Lu³⁺/Yb³⁺ and Lu³⁺/Er³⁺ crystals (x = 0.00 − 0.04) are isostructural with Sb₂Se₃. The cell parameters were increased for compounds upon increasing the dopant content (x). Scanning electron microscopy and transmission electron microscopy images show that co-doping of Lu³⁺/Yb³⁺ ions in the lattice of Sb₂Se₃ produces nanorods, while that in Lu³⁺/Er³⁺ produces nanoparticles, respectively. The electrical conductivity of co-doped Sb₂Se₃ is higher than that of the pure Sb₂Se₃ and increases with temperature. By increasing the concentration of Ln³⁺ions, the absorption spectrum of Sb₂Se₃ shows red shifts and some intensity changes. In addition to the characteristic red emission peaks of Sb₂Se₃, emission spectra of co-doped materials show other emission bands originating from f-f transitions of the Yb³⁺ ions.     

A green and facile one-pot synthesis of Ag–ZnO/RGO nanocomposite with effective photocatalytic activity for removal of organic pollutants

In this study, Ag–ZnO/reduced graphene oxide (Ag–ZnO/RGO) composite was synthesized by a green and facile one-step hydrothermal process. Aqueous suspension containing Ag and ZnO precursors with graphene oxide (GO) sheets was heated at 140 °C for 2 h. The morphology and structure of as-synthesized particles were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and Photoluminescence (PL) spectroscopy which revealed the formation of composite of metal, metal oxide and RGO. It was observed that the presence of Ag precursor and GO sheets in the hydrothermal solution could sufficiently decrease the size of ZnO flowers. The hybrid nanostructure, with unique morphology, obtained from this convenient method (low temperature, less time, and less number of reagents) was found to have good photocatalytic and antibacterial activity. The perfect recovery of catalyst after reaction and its unchanged efficiency for cyclic use showed that it will be an economically and environmentally friendly photocatalyst.     

Mild hydrocracking of 1-methyl naphthalene (1-MN) over alumina modified zeolite

The catalytic activity and life of the NiMoS supported on alumina–USY zeolite (physical mixture of alumina and USY (NMAZ), USY zeolite coated with alumina (NMACZ-2)) were compared in the hydrocracking of 1-methyl naphthalene by a single run at the several reaction temperatures between 360 and 400 °C as well as repeated runs at 360 °C. The relative activity of NMAZ is slightly higher after 1 h at all reaction temperatures, but was lower after 2 h at reaction temperatures above 380 °C. The preference of NMACZ-2 became distinct and definite by further increasing the reaction time at all reaction temperatures. Too long reaction time, particularly at higher reaction temperature, decreased the yield of (alkyl)benzenes, indicating the significant progress of the successive reactions. Thus, the highest yield of alkyl(benzenes) of about 97% was obtained over NMACZ-2 after 4 h at 380–390 °C. This was much less than the yield of about 82% obtained over NMAZ after 4 h at 370 °C. Ten repeated runs at 360 °C for 6 h resulted in marked decrease of yield over NMAZ from 73% to 64%, while the decrease in yield over NMACZ-2 was only from about 80% to 78%. The decrease of catalytic activity appears to reflect the coke formation on the USY which occurs on the naked acidic site of the substrate, which are rather isolated from the NiMoS on alumina. In contrast, alumina-coated support keeps USY underneath the alumina, which carries NiMoS and acidic sites on the same surface. The acidity of surface alumina is moderated by the underneath USY. The adequate acidity of the neighboring NiMoS and high hydrogenation activity provide a good balance resulting in an excellent catalytic activity and life of NiMoS supported on alumina-coated USY zeolite.     

Acid leaching of CaOSiO2 resources

Waste resources containing CaO and SiO₂ were leached by an acetic acid solution. Most CaO exist as calcium aluminosilicate and calcium silicate in steel slag and wollastonite, respectively. Silicate leaching was enhanced steeply by heating to 50 °C or increasing acid concentrations to 4 wt%. The Si and/or Al in the leachate then precipitated independently, depending on the solubility. This enabled to improve the selectivities of Ca and Si in the leachate and precipitate, respectively. However, CaO and SiO₂ are separate constituents of waste cement. The dissolution of Ca thus took place relatively fast while the ‘free’ silica leached little.     

Improved photo-catalytic activity of single-crystalline TiO2 nanowires surrounded by Pt cube nanoparticles

We report improved photo-catalytic properties of single-crystalline TiO₂ nanowires surrounded by Pt cubes for methanol electrooxidation under UV illumination. The TiO₂–Pt consists of single-crystalline TiO₂ nanowires grown along [0 0 1] direction and Pt cube nanoparticles with dominantly exposed {1 0 0} facets confirmed by transmission electron microscopy images and fast Fourier transform patterns. The nanostructure electrode consisting of TiO₂ nanowires and Pt cubes exhibits a remarkably improved performance for methanol electrooxidation in acid solution as compared to that of TiO₂ nanowires.     

Catalytic dechlorination of C5 compounds over metal-oxide/ZSM-5 catalysts

In this research, the dechlorination of 2-chloro-2-butene in C5 oil from the fluid catalytic cracking (FCC) process was performed through a catalytic reaction. Metal oxides were used as active materials and ZSM-5 was used as the supporting material for the catalysts; the metal was cobalt, iron, or manganese. After the preparation of three types of metal-oxide/ZSM-5 catalysts through the ion-exchange method, the activities and characteristics of each catalyst were evaluated. Through screening tests, the Co₃O₄/ZSM-5 catalyst was selected as the dechlorination catalyst, and the performance of catalysts containing different amounts of Co₃O₄ relative to ZSM-5 were tested.     

Enhancement in electron transport and light emission efficiency of a Si nanocrystal light-emitting diode by a SiCN/SiC superlattice structure

We report an enhancement in light emission efficiency of Si nanocrystal (NC) light-emitting diodes (LEDs) by employing 5.5 periods of SiCN/SiC superlattices (SLs). SiCN and SiC layers in SiCN/SiC SLs were designed by considering the optical bandgap to induce the uniform electron sheet parallel to the SL planes. The electrical property of Si NC LED with SiCN/SiC SLs was improved. In addition, light output power and wall-plug efficiency of the Si NC LED with SiCN/SiC SLs were also enhanced by 50% and 40%, respectively. This was attributed to both the formation of two-dimensional electron gas, i.e., uniform electron sheet parallel to the SiCN/SiC SL planes due to the conduction band offset between the SiCN layer and SiC layer, and an enhanced electron transport into the Si NCs due to a lower tunneling barrier height. We show here that the use of the SiCN/SiC SL structure can be very useful in realizing a highly efficient Si NC LED.     

Encapsulation of aliphatic amines into nanoparticles for self-healing corrosion protection of steel sheets

A noble approach based on the encapsulation of corrosion inhibitors has been presented, which are capable of improving the active corrosion protection without negatively influencing the barrier properties of the coating layers. Polymeric nanocapsules loaded with six types of amine corrosion inhibitors were synthesized by multi-stage emulsion polymerization. Depending on the basicity and water solubility of amines, different amounts of releasable corrosion inhibitors were encapsulated into the polymer capsules. Encapsulated organic amines were generally well released under alkaline conditions, and linear amines were more easily released from inside capsules than branched ones. The nanocapsules were incorporated into the coating resin and were coated on cold-rolled steel sheets to investigate corrosion protection efficiencies. The corrosion inhibitive efficiencies of the nanocapsule-containing coating layers were evaluated by electrochemical impedance spectroscopy (EIS) and scanning vibrating electrode technique (SVET). In this study, it was revealed that the intrinsic properties of the amines as well as their encapsulation/release behaviors determined the barrier property and self-healing protection capability of the coating layer.     

Effect of Repetitive Lysine-Tryptophan Motifs on the Eukaryotic Membrane

In a previous study, we synthesized a series of peptides containing simple sequence repeats, (KW)_n–NH₂ (n = 2,3,4 and 5) and determined their antimicrobial and hemolytic activities, as well as their mechanism of antimicrobial action. However, (KW)₅ showed undesirable cytotoxicity against RBC cells. In order to identify the mechanisms behind the hemolytic and cytotoxic activities of (KW)₅, we measured the ability of these peptides to induce aggregation of liposomes. In addition, their binding and permeation activities were assessed by Trp fluorescence, calcein leakage and circular dichrorism using artificial phospholipids that mimic eukaryotic liposomes, including phosphatidylcholine (PC), PC/sphingomyelin (SM) (2:1, w/w) and PC/cholesterol (CH) (2:1, w/w). Experiments confirmed that only (KW)₅ induced aggregation of all liposomes; it formed much larger aggregates with PC:CH (2:1, w/w) than with PC or PC:SM (2:1, w/w). Longer peptide (KW)₅, but not (KW)₃ or (KW)₄, strongly bound and partially inserted into PC:CH compared to PC or PC:SM (2:1, w/w). Calcein release experiments showed that (KW)₅ induced calcein leakage from the eukaryotic membrane. Greater calcein leakage was induced by (KW)₅ from PC:CH than from PC:SM (2:1, w/w) or PC, whereas (KW)₄ did not induce calcein leakage from any of the liposomes. Circular dichroism measurements indicated that (KW)₅ showed higher conformational transition compared to (KW)₄ due to peptide-liposome interactions. Taken together, our results suggest that (KW)₅ reasonably mediates the aggregation and permeabilization of eukaryotic membranes, which could in turn explain why (KW)₅ displays efficient hemolytic activity.