Multifractal analysis of Mg-doped ZnO thin films deposited by sol–gel spin coating method

A multifractal analysis has been performed on the 3D (three-dimensional) surface microtexture of magnesium-doped zinc oxide (ZnO:Mg) thin films with doping concentration of 0, 2, 4, and 5%. Thin films were deposited onto the glass substrates via the sol–gel spin coating method. The effect of magnesium doping, on the crystal structure, morphology, and band gap for ZnO:Mg thin films has been analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and UV–Vis spectroscopy. It has been observed that the surface of ZnO thin films is multifractal in nature. However, multifractality and complexity observed to decrease with increasing content of Mg in ZnO thin films due to formation of islands on the surface in accordance with Volmer–Weber growth mechanism. The investigations revealed that crystallinity, microtexture, morphology, and optical properties of the thin films can be tuned by controlling the Mg content within the ZnO lattice. In particular, their optical band gap energies were 3.27, 3.31, 3.34, and 3.33 eV at 0, 2, 4, and 5%, respectively. The prepared thin films of ZnO:Mg with tuned characteristics would have promising applications in optoelectronic devices.     

Determination of surface-induced platelet activation by applying time-dependency dissipation factor versus frequency using quartz crystal microbalance with dissipation

Platelet adhesion and activation rates are frequently used to assess the thrombogenicity of biomaterials, which is a crucial step for the development of blood-contacting devices. Until now, electron and confocal microscopes have been used to investigate platelet activation but they failed to characterize this activation quantitatively and in real time. In order to overcome these limitations, quartz crystal microbalance with dissipation (QCM-D) was employed and an explicit time scale introduced in the dissipation versus frequency plots (Df–t) provided us with quantitative data at different stages of platelet activation. The QCM-D chips were coated with thrombogenic and non-thrombogenic model proteins to develop the methodology, further extended to investigate polymer thrombogenicity. Electron microscopy and immunofluorescence labelling were used to validate the QCM-D data and confirmed the relevance of Df–t plots to discriminate the activation rate among protein-modified surfaces. The responses showed the predominant role of surface hydrophobicity and roughness towards platelet activation and thereby towards polymer thrombogenicity. Modelling experimental data obtained with QCM-D with a Matlab code allowed us to define the rate at which mass change occurs (A/B), to obtain an A/B value for each polymer and correlate this value with polymer thrombogenicity.     

The role of visual occlusion in altitude maintenance during simulated flight.

The use of visual occlusion as a cue to altitude maintenance in low-altitude flight (LAF) was investigated. The extent to which the ground surface is occluded by 3-D objects varies with altitude and depends on the height, radius, and density of the objects. Participants attempted to maintain a constant altitude during simulated flight over an undulating terrain with trees of various heights, radii, and densities. As would be predicted if participants used occlusion, root-mean-square error was related to the product of tree height and tree density (Experiment 1) and to the product of tree radius and tree density (Experiment 2). This relationship was also found for simulated terrains with a more realistic mixture of tree heights (Experiment 4). The authors present a modification to an occlusion model (T. Leung & J. Malik, 1997) that can be used to approximate occlusion in the context of LAF, and they evaluate the modified model using the present LAF data. On a practical level, simulating 3-D objects is computationally expensive. The present results suggest that performance may be maintained with fewer objects if their size is increased. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cellular uptake properties of a 2''-amino/2''-O-methyl-modified chimeric hammerhead ribozyme targeted to the epidermal growth factor receptor mRNA

PURPOSE: Rhabdomyosarcomas (RMS) are heterogeneous in their clinical presentation, histology, and cytogenetics. The growth of some RMS cells has been found to be regulated by the tyrosine kinase insulin-like growth factor (IGF) type I receptor. However, RMS cells exhibit variable sensitivity to inhibitors of tyrosine kinases and IGF receptors. Collectively, these heterogeneous features suggest that differences exist in the growth regulatory pathways of RMS. The objective of this study is to identify active tyrosine kinase signal transduction pathways in embryonal and alveolar RMS cells. METHODS: RMS tumor samples and cell lines representing both embryonal and alveolar histologic subtypes have been analyzed by immunoprecipitation and immunoblotting techniques to characterize phosphotyrosyl protein patterns and to identify tyrosine phosphorylated proteins. RESULTS: RMS cells can be characterized based on the patterns of phosphotyrosyl proteins, including the phosphorylation status of the catenin-like protein Cas1 and the signal adapter protein SHC, and the activation of IGF type I receptor signaling cascades including the formation of SHC-GRB2 signal protein complexes and MAP kinase activation. CONCLUSIONS: Rhabdomyosarcomas, especially the embryonal histologic subtype, are heterogeneous at the level of tyrosine kinase signal transduction. It will be important to characterize the growth regulatory pathways active in individual RMS tumors before targeting molecular therapies to this malignancy.     

Subunit exchange of lens alpha-crystallin: a fluorescence energy transfer study with the fluorescent labeled alphaA-crystallin mutant W9F as a probe

A chemical study of the common Caribbean sea plume Pseudopterogorgia acerosa from Puerto Rico has produced two previously undescribed secondary metabolites. One of them, 1, is a new representative of the pseudopterane family of diterpenes possessing the uncommon 3,4;5,6 diepoxyfuran moiety. The other metabolite, 2, is a rare norcembranolide diterpene. Their chemical structures, including relative stereochemistry, were established by detailed analysis of the spectral data in addition to NMR spectral comparisons with known pseudopterane and cembrane models.     

RF electro-thermal modeling of LDMOSFETs for power-amplifier design

A new approach for the electro-thermal modeling of LDMOSFETs for power-amplifier design that bypasses pulsed-IVs and pulsed-RF measurements is presented in this paper. The existence of low-frequency dispersion in LDMOSFETs is demonstrated by comparing pulsed IVs with iso-thermal IVs. The modeling technique uses iso-thermal IV and microwave measurements to obtain the temperature dependence of small-signal parameters. Optimized tensor-product B-splines, which distribute knots to minimize fitting errors, are used to represent the small-signal parameters and extract the large-signal model as a function of voltages and temperature. The model is implemented on ADS and is verified by simulating and measuring the power harmonics and IMD large-signal performance of a power amplifier. The impact on the model of temperature-dependent drain and gate charge is investigated. The presented model is found to compare well and, in some cases, exceed the existing MET model for LDMOSFETs     

RADIATION EFFECT ON BIOSYNTHESES OF ASCORBIC ACID AND RIBOFLAVIN IN GERMINATING CHICKPEA

The influence of irradiation on biosyntheses of ascorbic acid and riboflavin in germinating chickpea seeds at ambient (25-35℃) conditions, was investigated. The rate of syntheses of these vitamins significantly increased with increasing germination time upto 120 h depending upon the treatment (P<0.05). Maximum amounts of ascorbic acid, 22.32 and 16.84 mg/100g, were found in the 0.10 kGy sample after 120 h of germination in tap and distilled water respectively. However, a radiation dose of 0.15 kGy resulted in the development of maximum values of riboflavin, 11.40 and 11.38 μ g/g, on germination in tap and distilled water respectively. A significant linear relation (r = 0-954 to 0.997) was observed between the biosyntheses of these vitamins and the germination time upto 120 h of irradiated and unirradiated chickpea seed (P<0.05).     

TSAT is a better predictor than ferritin of hemoglobin response to Epoetin alfa in US dialysis patients

Clinical guidelines recommend concurrent treatment of anemia in end‐stage renal disease with erythropoiesis‐stimulating agents (ESAs) and iron. However, there are mixed data about optimal iron supplementation. To help address this gap, the relationship between iron markers and hemoglobin (Hb) response to ESA (Epoetin alfa) dose was examined. Electronic medical records of 1902 US chronic hemodialysis patients were analyzed over a 12‐month period between June 2009 and June 2010. The analysis included patients who had at least one Hb value during each 4‐week interval for four consecutive intervals (k ? 2, k ? 1, k, and k + 1; k is the index interval), received at least one ESA dose during intervals k ? 1 or k, had at least one transferrin saturation (TSAT) value at interval k, and at least one ferritin value during intervals k ? 2, k ? 1, or k. Effect modification by TSAT and ferritin on Hb response was evaluated using the generalized estimating equations approach. Patients had a mean (standard deviation) age of 62 (15) years; 41% were Caucasian, 34% African American, 65% had hypertension, and 39% diabetes. Transferrin saturation, but not ferritin, had a statistically significant (P < 0.05) modifying effect on Hb response. Maximum Hb response was achieved when TSAT was 34%, with minimal incremental effect beyond these levels. Of the two standard clinical iron markers, TSAT should be used as the primary marker of the modifying effect of iron on Hb response to ESA. Long‐term safety of iron use to improve Hb response to ESA warrants further study.     

Self‐Assembly of Ferromagnetic Organic–Inorganic Perovskite‐Like Films

Perovskite‐based organic–inorganic hybrids hold great potential as active layers in electronics or optoelectronics or as components of biosensors. However, many of these applications require thin films grown with good control over structure and thickness—a major challenge that needs to be addressed. The work presented here is an effort towards this goal and concerns the layer‐by‐layer deposition at ambient conditions of ferromagnetic organic–inorganic hybrids consisting of alternating CuCl₄‐octahedra and organic layers. The Langmuir‐Blodgett technique used to assemble these structures provides intrinsic control over the molecular organization and film thickness down to the molecular level. Magnetic characterization reveals that the coercive field for these thin films is larger than that for solution‐grown layered bulk crystals. The strategy presented here suggests a promising cost effective route to facilitate the excellently controlled growth of sophisticated materials on a wide variety of substrates that have properties relevant for the high density storage media and spintronic devices.