Toward Demystifying the Mohs Hardness Scale

Today, the Mohs scale is used profusely throughout educational systems without any persuasive understanding of the fundamental principles. Why one mineral has a scratch hardness over the next culminating in a scale of 1 (chalk) to 10 (diamond) has no atomistic or structure‐sensitive basis that explains this outcome. With modern computationally based atomistic and multiscale models, there is increasing promise of defining the pressure and rate‐dependent parameters that will allow a fundamental understanding of the Mohs scale. This study principally addresses the combined fracture and plasticity parameters that qualitatively affect fracture at the nanoscale. A physical model wherein the crack tip under a scratch is shielded by dislocations is supported by molecular dynamics (MD) simulations in both ductile aluminum and brittle silicon carbide. Next, this model is applied to nanoindentation data from the literature to produce a ranking of Mohs minerals based on their fundamental properties. As such, what is presented here is a first step to address the flow and fracture parameters ultimately required to provide a figure of merit for scratch hardness and thus the Mohs scale.     

Formulation and validation of a mathematical model for a naturally ventilated greenhouse with shading nets in warm and humid climate of India

A thermal model is developed to investigate the suitability of a simple, inexpensive and naturally ventilated greenhouse with shading nets in warm and humid climatic condition for off-season cultivation of vegetables like okra, cucumber, etc. during winter. These vegetables are generally grown during summer and the rainy season. The study was conducted from November 2011 to February 2012 in OUAT, Bhubaneswar, and Odisha where warm and humid climate usually prevails. Air temperatures inside the greenhouse with shading net were only 1–2°C higher during peak sunny hours and considerably 3–5°C more during night hours compared with ambient air temperatures. Lowering of air temperature during peak sunny hours and increasing during the night due to use of shading nets would become favourable for growing off-season vegetables in naturally ventilated greenhouse. Predicted values of air and plant temperatures were found to be in close agreement with experimental values.     

Reduced Maternal Erythrocyte Long Chain Polyunsaturated Fatty Acids Exist in Early Pregnancy in Preeclampsia

The present prospective study examines proportions of maternal erythrocyte fatty acids across gestation and their association with cord erythrocyte fatty acids in normotensive control (NC) and preeclamptic pregnancies. We hypothesize that maternal fatty acid status in early pregnancy influences fetal fatty acid stores in preeclampsia. 137 NC women and 58 women with preeclampsia were included in this study. Maternal blood was collected at 3 time points during pregnancy (16–20th weeks, 26–30th weeks and at delivery). Cord blood was collected at delivery. Fatty acids were analyzed using gas chromatography. The proportions of maternal erythrocyte α‐linolenic acid, docosahexaenoic acid, nervonic acid, and monounsaturated fatty acids (MUFA) (p < 0.05 for all) were lower while total n‐6 fatty acids were higher (p < 0.05) at 16–20th weeks of gestation in preeclampsia as compared with NC. Cord 18:3n‐3, 22:6n‐3, 24:1n‐9, MUFA, and total n‐3 fatty acids (p < 0.05 for all) were also lower in preeclampsia as compared with NC. A positive association was observed between maternal erythrocyte 22:6n‐3 and 24:1n‐9 at 16–20th weeks with the same fatty acids in cord erythrocytes (p < 0.05 for both) in preeclampsia. Our study for the first time indicates alteration in maternal erythrocyte fatty acids at 16th weeks of gestation which is further reflected in cord erythrocytes at delivery in preeclampsia.     

Cobalt molybdenum oxide catalysts for selective oxidation of cyclohexane

Oxidation of cyclohexane has been carried out using molecular oxygen over cobalt molybdenum oxide (CoMoO₄) catalysts in solvent free conditions. The catalysts were prepared using citrate method with three different molar ratios of Co:Mo, 1:1, 1:2, and 2:1 along with individual oxides for comparative studies. While all the catalysts showed significant activity and selectivity, CoMoO₄ with 1:1 ratio showed the best performance compared to the others with a conversion of 7.38%, with selectivity to cyclohexanol and cyclohexanone (KA oil) of 94.3%, in 1 h. The performance of the catalyst, has been studied as a function of oxygen pressure, reaction temperature, and catalyst loading. It was observed that the catalyst deactivates during the course of the reaction. The reasons for deactivation and methods for restoring the activity have been studied. A kinetic model is presented that captures the complex kinetics and matches well with the experimental data. © 2016 American Institute of Chemical Engineers AIChE J, 62: 4384–4402, 2016     

Influence of the coupling agent and graphene oxide on the thermal and mechanical behavior of tea dust–polypropylene composites

In this study, the effects of a coupling agent and additive on the physicomechanical (morphological, mechanical, thermal, and swelling) properties of tea dust (TD)–polypropylene (PP) composites were studied. TD–PP composites were prepared with untreated tea dust (UTD) and tetraethylsilane (TES)‐treated TD or silanated tea dust (STD) particles at ratios of 0:100, 10:90, 20:80, 30:70, and 40:60 w/w. Initially, TD particles were grafted by TES as a coupling agent, and these STD particles were then modified with graphene oxide (GO) as an additive to study their effects on the STD–PP composites; these were compared to the STD–PP and UTD–PP composites in accordance with a study of improvements in the mechanical properties. All of the TD–PP composites were analyzed with Fourier transform infrared spectroscopy, scanning electron microscopy, and mechanical, thermal, and physical tests. The thermal and mechanical properties of both the STD–PP and GO‐modified STD–PP composites were found to be improved as compared to those of the UTD–PP composites. So, the recycling of a large amount of TD as a waste material could be useful in the preparation of TD–PP composites. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42927.     

Dielectric and conducting behavior of pyrene functionalized PANI/P(VDF‐co‐HFP) blend

Herein, we present the dielectric and electrical conductivity properties of the partially miscible polymer blend prepared using pyrene functionalized polyaniline (pf‐PANI) and poly(vinylidene fluoride‐co‐hexafluoro propylene) (PVDF‐co‐HFP). The blend mostly retains the fluorescent nature of pf‐PANI as well as can be moldable and possesses good damping property. The dielectric properties have been investigated as a function of temperature at three different frequencies and the plausible origin of polarization responsible for dielectric behavior in this blend has been identified. The experimental results of dielectric measurements are compared with theoretical models and discussed. The surface morphology of the samples has been examined with a scanning electron microscope. The electrical conductivity has also been studied as a function of temperature and explained in terms of hopping of charge carriers/interconnected networks. The combined dielectric and conductivity results together with scanning electron microscope micrographs, reveal that there is hindrance to achieve percolation threshold even after pf‐PANI addition of 57 vol % and subsequent thermal treatment. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44077.     

Effect of Nanoclay on the Mechanical,Thermal, and Water Absorption Properties of an UP-toughened Epoxy Network

Unsaturated polyester (UP)-toughened epoxy nanocomposites were prepared, and their effective mechanical and thermal properties were studied. Two types of organo-modified montmorillonite (OMMT) clays were used to prepare the nanocomposites. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analysis showed the formation of exfoliated silicate layers in the UP-toughened epoxy matrix. Mechanical tests revealed that nanocomposites (containing 1 wt% OMMT clay) showed an increase in tensile strength to 13.8%, flexural strength to 10%, and impact strength to 4% compared with an UP-toughened epoxy blend. The effect of different heating rates on the curing behavior of UP-toughened epoxy nanocomposites was investigated using non-isothermal differential scanning calorimetry. The data were interpreted using the Kissinger and Flynn–Wall–Ozawa models to find the curing reaction parameter. The water uptake behavior for nanocomposites increased with the addition of OMMTs. Scanning electron microscopy micrographs indicated morphological changes in the impact fractured samples of UP-toughened epoxy nanocomposites.     

Effect of SO<Subscript>4</Subscript> <Superscript>2-</Superscript>, Cl<Superscript>–</Superscript> and NO<Subscript>3</Subscript> <Superscript>-</Superscript> anions on the formation of iron oxide nanoparticles via microwave synthesis

In the present work iron oxide nanoparticles have been prepared by microwave assisted synthesis with the influence of different precursor salts and synthesis of magnetite, hematite, Iron oxide hydroxide and maghemite nanoparticles. Synthesized iron oxide nanoparticles were characterized with Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), and Energy-dispersive X-ray Spectroscopy (EDX). XRD measurements show that the peaks of diffractogram are in agreement with the theoretical data of magnetite, hematite, FeO(OH) (Iron oxide hydroxide) and maghemite. Crystallite size of the particles was found to be 33, 45, 36 and 43.5 nm for Fe₃O₄, α-Fe₂O₃, FeO(OH) and γ-Fe₂O₃. FESEM studies indicated that size of the particles is observed in the range of about 19.4 to 46.7 nm (Fig. 2a, average 32 nm), 29.1 to 67.6 nm (Fig. 2b average 45 nm), 29.1 to 40.8 (Fig. 2c average 36.6 nm), 29.1 to 80 nm (Fig. 2d average 43.5) for Fe₃O₄, α-Fe₂O₃, FeO(OH) and γ-Fe₂O₃ respectively. EDX spectral analysis reveals the presence of carbon, oxygen, iron in the synthesized nanoparticles. The FTIR graphs indicated absorption bands due to O–H stretching, C–O bending, C–H stretching and Fe–O stretching vibrations.     

Tuning of Cloud Point by the Nature of Surfactant Headgroup: Influence of Counterion and Additives

Work was performed to distinguish the role of sulfonate (–SO₃ ^?) and sulfate (–OSO₃ ^?) with respect to the micellization and clouding phenomenon in ionic surfactant solutions. The clouding phenomenon is a recent addition to the conventional one observed with nonionic surfactants. Three ionic surfactants [sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (SDBS), and sodium dodecylsulfonate (SDSo)] are chosen and the effects of added tetra-n-pentylammonium bromide (TPeAB) and benzyl tributylammonium bromide (BTAC) have been studied on micellization and clouding behaviors in aqueous solution. Based on critical micelle concentration (CMC) and cloud point (CP) measurements, the following order has been observed: SDBS < SDS < SDSo. Though both SDBS and SDSo contain sulfonate groups, they are found at the two ends of the ordering. Therefore, the role of the phenyl ring is also having importance in clouding phenomena. For a typical surfactant, TPeAB was found to be more effective than BTAC. Based on the CP studies, two compositions of SDSo + TPeAB/BTAC were chosen and the effects of different additives (carbohydrate, amino acid, and l-ascorbic acid) on the CP were investigated. Additive may either decrease or increase CP, depending on the structure of the counterion or additive. The present work shows a few novelties: (1) headgroup/counterion dependence of CP and (2) hydrophobicity of counterion/surfactant has an important bearing on the phenomenon. The data can be utilised in improving cloud point extraction methodologies (CPEMs).     

An Instant,Green, Microwave Irradiated Process for the Preparation of Advanced,Hybrid, Nanoflower of Thorium Oxide and Thorium Oxalate Hydrate Useful for Broad Application Spectrum

Protection of Metals and Physical Chemistry of Surfaces - We report a facile and reproducible method to synthesize advanced, homogenized, hybrid, nanoflower of thorium oxide and thorium oxalate...