Creep fracture in Al-SiC metal-matrix composites

Creep fracture behaviour of pure aluminium-matrix composites with 10–30 vol% SiC particulates at 623 K is reported. A comparison of tensile and compression creep data shows the existence of a transition stress. Above this transition stress no steady state creep is observed in tension. This transition stress is related to a transition from intergranular to transgranular fracture. The origin of transition stress is perhaps associated with the diffusional relaxation of stress concentration at the matrix/particle interface by lattice diffusion. The intergranular creep fracture of composites appears to be similar to that of unreinforced aluminium and it is power-law creep controlled. The transgranular creep fracture occurs by void nucleation and growth. The nucleation strain for voids is quite small and hence the tertiary stage starts before the end of the primary stage. The ductile fracture models overestimate the strain to fracture and do not predict the observed stress dependence of strain to fracture.     

Identification of Pd3+ ions in zeolite L by temperature programmed reduction and electron paramagnetic resonance spectroscopy

Pd supported on KL zeolite has been studied by temperature programmed reduction (TPR) and electron paramagnetic resonance (EPR) spectroscopy. It has been found that upon calcination in pure oxygen Pd³⁺ and Pd²⁺ ions are formed; the Pd³⁺ ions are identified by their EPR signal. As Pd³⁺ ions in the cancrinite cages are difficult to reduce, the H₂ consumption in conventional TPR is below the stoichiometric amount.     

Application of polymeric flocculant for enhancing settling of the pond ash particles and water drainage from hydraulically stowed pond ash

Delayed settling of the ash particles and poor drainage of water from the pond ash are the major problems faced during the hydraulic stowing of pond ash. In this study the effect of polymeric flocculant on settling of the ash particles and drainage of water during pond ash stowing are investigated. In addition, the parameters, viz. drainage and absorption of water during pond ash stowing are quantified by stowing a mine goaf model with pond ash slurries of five different concentrations added with and without flocculant. The study revealed that addition of only 5 × 10^?6 of Sodium Carboxymethyl Cellulose (Na-CMC) flocculant with the pond ash slurries during stowing offers best result in terms of quicker settling of the ash particles and enhanced water drainage from the hydraulically stowed pond ash. Besides, it resulted in drainage of more than 85% of the total water used in the initial 45 min of stowing. The improvement in drainage is caused due to coagulation and flocculation of the pond ash particles because of charge neutralization and particle–particle bridging. This study may provide a basis for estimating the drainage and absorption of water during the real pond ash stowing operation in underground mines.     

Two-stage quasi-class-E power amplifier in GaN HEMT technology

This letter presents a two-stage quasi-class-E monolithic microwave integrated circuit power amplifier at 2.0GHz, which is based on field-plated GaN high electron mobility transistor technology. It consists of a driver stage and a power stage. The circuit schematic is described. The amplifier achieves an output power of 37.5dBm into a 50-/spl Omega/ load, a power added efficiency (PAE) of 50%, and a gain of 18.2dB. A power density of 5.6W/mm is achieved.     

Interagent communication and synchronization support in the DaAgent mobile agent-based computing system

This paper describes the design, implementation, and evaluation of interagent communication and synchronization models in the DaAgent mobile-agent based computing system. Based on the requirements of some sample Internet computing applications, eight system-level models of interagent communication and synchronization are proposed. A new synchronization mechanism called location synchronization that is relevant for interacting mobile agents is also proposed. This paper evaluates the eight models based on their utility, performance, level of communication and synchronization support, and applicability in the Internet computing environment. A prototype implementation and detailed performance evaluation of these models based on two interacting, multiagent applications are also presented.     

Probabilistic Model for Polycrystalline Microstructures with Application to Intergranular Fracture

A two part probabilistic model for polycrystalline microstructures is described. The model utilizes a Poisson–Voronoi tessellation for the grain geometry and a vector random field model for the crystallographic orientation. The grain geometry model is calibrated to experimental data through the intensity of the Poisson point field underlying the Poisson–Voronoi tessellation and the orientation random field is calibrated to experimental data through its marginal distributions and second moment properties. Realizations of the random microstructure are generated by use of translation methods and are used, with simplified mechanical models, to investigate the problem of intergranular fracture. It is found that intergranular cracks exhibit some statistical properties of a scaled Brownian motion process.     

An approach to regulating machine sharing in reconfigurable back-end semiconductor manufacturing

By complying with the operational philosophy of virtual production lines, a back-end semiconductor manufacturing system can be controlled and managed with better reconfigurability. However, due to the absence of a fully-integrated information system and the gaining popularity of distributed computing, machine reconfiguration decisions are made by machine controllers on the shop floor where heterarchical control architecture is typically used. This research investigates how non-cooperative game theory could be applied for facilitating the decision process reconfiguration decision-making at the machine controller level as machines are competed by multiple jobs streams. This paper presents how material flow traffic can be better regulated in a reconfigurable manufacturing environment. A study using an industrial pilot system is discussed to demonstrate the applicability of the proposed approach, in which heuristics are used to determine the game specification.     

An analytical and experimental approach for pressure distribution analysis of a particular lobe and plain bearing performance keeping in view of all impeding varying parameters associating with fixed lubrication SAE20W40

This paper presents both analytical and experimental pressure analysis approach of a typical Lobe and plain bearing for determining effective performance of the bearing. This is found to be dependent on several variables viz. angular velocity (1200-1900 rpm), load (300-750 N) and pressure angle (0°-180°). This study in particular has been carried out for better rectifications and comparative prediction of lobe and plain bearing in terms of pressure distribution behavior under lubrication oil grade of SAE20W40. Influencing parameters were varied in this set up only to get optimum parametric combination considering all relevant practical issues. The experimentation was done based on significant directives of relevant literatures in these sectors. Attempt was made to compare the analytical findings with experimental results and found matched appreciably. After that attention was diverted to find the nature of pressure and load carrying capacity at various fluctuating speed and load with a fixed lubrication of SAE20W40 for appropriate decision making towards its characteristic performance. The analytical data generated by MATLAB are compared with experimental data which is generated by JBTR.

     

Morphology,Mineralogy and Mixing of Individual Atmospheric Particles Over Kanpur (IGP): Relevance of Homogeneous Equivalent Sphere Approximation in Radiative Models

Estimation of the direct radiative forcing (DRF) by atmospheric particles is uncertain to a large extent owing to uncertainties in their morphology (shape and size), mixing states, and chemical composition. A region-specific database of the aforementioned physico-chemical properties (at individual particle level) is necessary to improve numerically-estimated optical and radiative properties. Till date, there is no detailed observation of the above mentioned properties over Kanpur in the Indo-Gangetic Plain (IGP). To fill this gap, an experiment was carried out at Kanpur (IITK; 26.52°N, 80.23°E, 142 m msl), India from April to July, 2011. Particle types broadly classified as (a) Cu-rich particles mixed with carbon and sulphur (b) dust and clays mixed with carbonaceous species (c) Fe-rich particles mixed with carbon and sulfur and (d) calcite (CaCO₃) particles aged with nitrate, were observed. The frequency distributions of aspect ratio (AR; indicator of extent of particle non-sphericity) of total 708 particles from April to June reveal that particles with aspect ratio range >1.2 to ≤1.4 were abundant throughout the experiment except during June when it was found to shift to high AR range, >1.4 to ≤1.6 (followed with another peak of AR i.e. >2 to ≤2.4) due to dust storm conditions enhancing the occurrence of more non-spherical particles over the sampling site. The spherical particles (and close to spherical shape; AR range, 1.0 to ≤1.2) were found to be <20% throughout the experiment with a minimum (11.5%) during June. Consideration of Homogeneous Equivalent Sphere Approximation (HESA) in the optical/radiative model over the study region is found to be irrelevant during the campaign.