Optimum design of linear tuned mass dampers for structures with nonlinear behaviour

This paper investigates the optimum design of tuned mass dampers (TMDs) for the seismic protection of inelastic structures. A single linear TMD is treated and is assumed to be applied to a single nonlinear degree of freedom system, described by the Bouc–Wen hysteretic model. The seismic load is modelled by a stationary filtered stochastic process to consider its intrinsic stochastic nature. The optimization problem is set by taking into consideration three different possible objective functions (OFs): the maximum of the peak structural displacement standard deviation, the average hysteretic dissipated energy of a protected building with reference to an unprotected one, and a functional damage that considers the two indexes previously described. Different numerical examples and parametric analysis are shown to confront the three optimization criteria and to determine the best tuning frequency and damping ratio of the TMDs to be used in the structure. Results confirm that the application of a TMD system reduces the amount of the hysteretic dissipated energy, which is a direct measure of damage in the structure, and so it is beneficial for the protection of buildings that develop a nonlinear behaviour under severe dynamic loadings.     

When public opposition defeats alternative water projects - The case of Toowoomba Australia

Located approximately 100 km west of Brisbane, Toowoomba is home to approximately 95,000 people. Surface water from dams is the main source of water for the city. In 2006 the residents of Toowoomba were invited to vote in a referendum (plebiscite) concerning whether or not an indirect potable wastewater reuse scheme should be constructed to supply additional water to the area. At that stage dam levels in Toowoomba were at approximately twenty percent of capacity. Toowoomba residents, after intense campaigning on both sides of the referendum debate, voted against the proposal. In July 2008 dam levels dropped to eleven percent. Stage 5 water restrictions have been in place since September 2006, subsequently mains water must not be used for any outdoor uses. This paper describes in detail how public opposition in the case of Toowoomba's referendum, defeated the proposal for a water augmentation solution. Reasons for the failure are analysed. In so doing, the paper provides valuable insights with respect to public participation in indirect potable reuse proposals, and discusses factors including politics, vested interest and information manipulation. This paper is significant because of the lack of detailed information published about failed water infrastructure projects.     

Using anisotropic diffusion equations in pixon domain for image de-noising

Image enhancement is an essential phase in many image processing algorithms. In any image de-noising algorithm, it is a major concern to keep the interesting structures of the image. Such interesting structures in an image often correspond to the discontinuities in the image (edges). In this paper, we propose a new algorithm for image de-noising using anisotropic diffusion equations in pixon domain. In this approach, diffusion equations are applied on the pixonal model of the image. The algorithm has been examined on a variety of standard images and the performance has been compared with algorithms known from the literature. The experimental results show that in comparison with the other existing methods, the proposed algorithm has a better performance in de-noising and preserving image edges.     

A Coating that Combines Lotus‐Effect and Contact‐Active Antimicrobial Properties on Silicone

The antimicrobial equipment of materials is of great importance in medicine but also in daily life. A challenge is the antimicrobial modification of hydrophobic surfaces without increasing their low surface energy. This is particularly important for silicone‐based materials. Because most antimicrobial surface modifications render the materials more hydrophilic, methods are needed to achieve antimicrobial activity without changing the high water‐contact‐angle. This is achieved in the present work, where SiO₂ nanoparticles are prepared and functionalized with 3‐(trimethoxysilyl)‐propyldimethyloctadecyl ammonium chloride (QAS) in a one‐pot synthesis. The modified nanoparticles are applied onto a silicone surface from suspension with no need of elaborate pretreatment. The resulting surface exhibits a Lotus‐Effect combined with contact‐active antimicrobial properties. The particle surfaces show self‐organizing micro‐ and nanostructures that afford a water‐contact angle of 144° and a hysteresis below 10°. The particles are self‐adhering on the silicone after solvent evaporation and resistant against immersion into and washing with water for at least 5 d. Thereby, the adhesion of the bacterial strain Staphylococcus aureus to these surfaces is reduced and the remaining bacterial cells are killed within 16 h. This is the first example of a Lotus‐Effect surface with intrinsic contact‐active antimicrobial properties.     

Inverted Organic Solar Cells with Sol–Gel Processed High Work‐Function Vanadium Oxide Hole‐Extraction Layers

For large‐scale and high‐throughput production of organic solar cells (OSCs), liquid processing of the functional layers is desired. We demonstrate inverted bulk‐heterojunction organic solar cells (OSCs) with a sol–gel derived V₂O₅ hole‐extraction‐layer on top of the active organic layer. The V₂O₅ layers are prepared in ambient air using Vanadium(V)‐oxitriisopropoxide as precursor. Without any post‐annealing or plasma treatment, a high work function of the V₂O₅ layers is confirmed by both Kelvin probe analysis and ultraviolet photoelectron spectroscopy (UPS). Using UPS and inverse photoelectron spectroscopy (IPES), we show that the electronic structure of the solution processed V₂O₅ layers is similar to that of thermally evaporated V₂O₅ layers which have been exposed to ambient air. Optimization of the sol gel process leads to inverted OSCs with solution based V₂O₅ layers that show power conversion efficiencies similar to that of control devices with V₂O₅ layers prepared in high‐vacuum.     

The robustness of series-connected high power IGBT modules

The behaviour in terms of robustness of series-connected high power IGBT modules is presented, arranged in a topology which ensures voltage balance on IGBT’s and diodes by means of a simple auxiliary circuit applied directly on the high power devices, which are used in hard switching mode. Analyses in terms of IGBT and diode SOA (safe operating area), collector to emitter voltage gradient and short circuit condition are reported as well as an extended experimental characterisation. Both analyses confirm superior switching rating and system reliability, by using two series-connected IGBT in substitution of a single module, same current and double voltage rated. Moreover, thanks the auxiliary circuit presence, the robustness of total system is maintained also in extreme operating conditions.     

Plasmonic Nanoparticles as a Physically Unclonable Function for Responsive Anti‐Counterfeit Nanofingerprints

Far‐field scattering of randomly deposited Au nanoparticles (NPs) is demonstrated as a physically unclonable optical function for anti‐counterfeit applications in which the scattering patterns are easily produced yet impractical to replicate. Colloidal metal NPs are superb components for nanoscale labels owing to their small dimensions and intense far‐field scattering visible at wavelengths that depend on colloidal size, shape, composition, and their local environment. The feasibility of Au NP depositions as nanofingerprints is presented using a simple pattern matching algorithm. These NPs offer extended functionality as environmental sensors. Taking advantage of the local refractive index dependent scattering wavelengths of metal NPs, a detectable color change is also demonstrated from a nanofingerprint comprised of Au and Ag NPs when placed in media with different refractive index. The facile deposition method coupled with the intense scattering and optical response of metal NPs provides physically unclonable tags (nanofingerprints) with the ability to serve as tamper‐evident and aging labels.     

Towards a Better Prediction of Cell Settling on Nanostructure Arrays—Simple Means to Complicated Ends

Vertical arrays of nanostructures (NSs) are emerging as promising platforms for probing and manipulating live mammalian cells. The broad range of applications requires different types of interfaces, but cell settling on NS arrays is not yet fully controlled and understood. Cells are both seen to deform completely into NS arrays and to stay suspended like tiny fakirs, which have hitherto been explained with differences in NS spacing or density. Here, a better understanding of this phenomenon is provided by using a model that takes into account the extreme membrane deformation needed for a cell to settle into a NS array. It is shown that, in addition to the NS density, cell settling depends strongly on the dimensions of the single NS, and that the settling can be predicted for a given NS array geometry. The predictive power of the model is confirmed by experiments and good agreement with cases from the literature. Furthermore, the influence of cell‐related parameters is evaluated theoretically and a generic method of tuning cell settling through surface coating is demonstrated experimentally. These findings allow a more rational design of NS arrays for the numerous exciting biological applications where the mode of cell settling is crucial.