How Do People with Disabilities Consider Fire Safety and Evacuation Possibilities in Historical Buildings?—A Swedish Case Study

An exploratory focus group study of people with different types of disabilities, e.g. mobility, visual and auditory, was carried out to explore how evacuation safety in historical buildings can be improved for people with various disabilities. Accounts of real life experiences on how well evacuation routes in historical buildings are adapted to people with different types of disabilities, as well as suggestions for safety enhancing measures, were collected. Some examples of reported problems were level differences on the way to and in evacuation routes for people with mobility impairments. Other examples were problems with orientation for people with visual disabilities and problems with detecting the evacuation alarm signal for people with auditory disabilities. In general the participants expressed different problems and needs depending on their type of disability. A common view amongst all the participants were that organizational parameters concerning evacuation of people with disabilities have to be improved. One conclusion from the study was that there are shortcomings in the physical environment as well as in the organization of evacuation in historical buildings today. This means that emergency evacuation safety must be properly focused on when improving accessibility in historical buildings. Measures must be taken to address the different needs of people with various types of disabilities as well as to make improvements for all user groups.     

Two meta-heuristics for three-stage assembly flowshop scheduling with sequence-dependent setup times

In this paper, we consider a three-stage assembly flowshop scheduling problem with bi-objectives, namely the mean flow time and maximum tardiness. This problem can be considered as a production system model consisting of three stages: (1) different production operations are done in parallel, concurrently and independently, (2) the manufactured parts are collected and transferred to the next stage, and (3) these parts are assembled into final products. In this paper, sequence-dependent setup times and transfer times are also considered as two important presumptions in order to make the problem more realistic. We present a novel mathematical model for a production system with a new lower bound for the given problem. Obtaining an optimal solution for this type of complex, large-sized problem in reasonable computational time by using traditional approaches and optimization tools is extremely difficult. Thus, we propose two meta-heuristics, namely simulated annealing and tabu search, to solve a number of test problems generated at random. Finally, the computational results are illustrated and compared in order to show the efficiency of the foregoing meta-heuristics.     

Swelling behavior of polystyrene networks in some aliphatic esters and linear polystyrene solutions

Summary Polystyrene networks were synthesized by free radical polymerization of styrene in the presence of dibenzoyl peroxide as an initiator, divinylbenzene as a crosslinker at 50 °C in toluene under nitrogen atmosphere. The swelling behavior of the synthesized polystyrene networks were studied at different temperatures in methyl acetate, ethyl acetate, propyl acetate, isopropyl acetate, butyl acetate, isobutyl acetate, tert-butyl acetate, and isopentyl acetate. Equations were given for the variation of the polymer-solvent interaction parameter, χ₁₂, as a function of reciprocal absolute temperature in the temperature range from 25 to 75 °C. Polystyrene networks were swollen in linear polystyrene solutions in toluene of different concentrations. Linear polystyrene samples were almost monodisperse and of high molecular weight. The equilibrium swelling degrees were evaluated using the Flory-Rehner theory. The relation of volume swelling ratio, q_v, to the volume fraction of the linear polymer in solution, φ, was evaluated and characterized by interaction parameter of crosslinked polystyrene with linear polystyrene, χ₂₃. The parameter χ₂₃ was found around zero as expected from mixtures of similar chemical structures by extrapolating the values of χ₂₃ at tested concentrations to zero solvent concentration.     

Electrochemistry at capped platinum nanoparticle Langmuir Blodgett films: A study of the influence of platinum amount and of number of LB layers

Platinum nanoparticles (n-Pt), over-grafted with 2-thiophenecarbonyl chloride are assembled on gold electrodes, by the Langmuir Blodgett (LB) technique using behenic acid (BHA) as promoting agent. These layers are electrochemically active without any preliminary activation. The [Fe(CN)₆]^3−/4− redox couple was used as electrochemical probe. This paper reports on the influence of the number of deposited LB layers, and the n-Pt density on the electrochemical response. n-Pt density was modified by the change of the “BHA/n-Pt” ratio. Cyclic voltammograms of “[Fe(CN)₆]^3−/4−” were observed whatever the coating conditions. As soon as the first layer was deposited the electrochemical response was associated to the n-Pt coverage, its response slightly increased up to a steady state for five or seven layers. As expected, the increase of the Pt density favored the increase of the current density. XPS analysis performed before and after electrochemical cycling showed that 4-mercaptoaniline capped platinum nanoparticles, and their over grafting were chemically and electrochemically stable. Analysis of influence of the number or the n-Pt density of the layers showed that the electrochemically active part of LB electrodes was provided by the last layer plus a part of the underlying one.     

The effect of synthesis gas composition on the Fischer–Tropsch synthesis over Co/γ-Al2O3 and Co–Re/γ-Al2O3 catalysts

The Fischer–Tropsch synthesis over Co/γ-Al₂O₃ and Co–Re/γ-Al₂O₃ was investigated in a fixed-bed reactor at 20 bar and 483 K using feed gases with molar H₂/CO ratios of 2.1, 1.5 and 1.0 simulating synthesis gas derived from biomass. With lower H₂/CO ratios in the feed, the CO conversion and the CH₄ selectivity decreased, while the C₅₊ selectivity and olefin/paraffin ratio for C₂–C₄ increased slightly. The water–gas shift activity was low for both catalysts, resulting in high molar usage ratios of H₂/CO (close to 2.0), even at the lower inlet ratios (i.e. 1.5 and 1.0). For both catalysts, the drop in the production rate of hydrocarbons when shifting from an inlet ratio of 2.1 to 1.5 was significant mainly because the H₂/CO usage ratio did not follow the change in the inlet ratio. The hydrocarbon selectivities were rather similar for inlet H₂/CO ratios of 2.1 and 1.5, while significantly deviating from those for an inlet ratio of 1.0. With the studied catalysts, it is possible to utilize the advantages of an inlet ratio of 1.0 (higher selectivity to C₅₊, lower selectivity to CH₄, no water–gas shifting of the bio-syngas needed prior to the FT reactor) if a low syngas conversion is accepted.     

Effect of compatibilizer on the natural durability of wood flour/high density polyethylene composites against rainbow fungus (Coriolus versicolor)

To evaluate the effect of compatibilizer on the natural durability of wood flour/high density polyethylene composites against Coriolus versicolor, composites containing 25% and 50% by weight maple wood flour and 1% and 2% compatibilizer (Maleic anhydride polyethylene (MAPE)), respectively, were sampled. Identical specimens of the same composites without the compatibilizer were also prepared. Physical and mechanical properties of all specimens, including water absorption, flexural modulus, flexural strength, impact strength and hardness, were determined prior to and after incubation with the fungus for 14 weeks at 25°C and 75% relative humidity. Weight losses of the specimens were also determined after incubation. Results indicated that the compatibilizer had significant effects on the natural durability of the studied composite formulations so that all mechanical properties were affected by the fungus to greater extents in the case of uncompatibilized specimens than the compatibilized ones. Weight loss of the uncompatibilized composites was also higher than that of compatibilized ones. Higher water absorption was observed in all cases after incubation. However, the increase in water absorption was considerably higher in the case of uncompatibilized specimens. POLYM. COMPOS., 28:273–277, 2007. © 2007 Society of Plastics Engineers