Uptake of arsenic by New Zealand watercress (Lepidium sativum)

Watercress (Lepidium sativum) is consumed as a vegetable, especially by the indigenous community in New Zealand. An investigation was carried out on the accumulation of arsenic by watercress, following earlier reports of inordinate arsenic concentrations in some aquatic macrophytes collected from the Waikato River, North Island, New Zealand. The Waikato River and some other aquatic systems in Taupo Volcanic Zone, New Zealand have elevated arsenic concentrations due to geothermal activity. Watercress, river water and sediment samples were collected from 27 sites along the Waikato river and analysed for arsenic. Greenhouse trials with watercress grown in beakers containing added arsenic were conducted to confirm the ability of this species to accumulate arsenic. At a number of sites, the concentration of arsenic in both the water and the watercress samples exceeded the World Health Organisation (WHO) limit for drinking water (0.01 mg l(-1)) and foodstuffs (2 mg kg(-1) on a fresh weight basis). The average leaf and stem arsenic concentrations were, respectively, 29.0 and 15.9 mg kg(-1) on a fresh weight basis. Plants grown in solutions of >0.4 mg l(-1) arsenic concentration had fresh weight arsenic concentrations above the WHO limit. Despite these higher concentrations, arsenic levels in plants grown under greenhouse conditions were approximately fivefold lower than in plants growing in the Waikato River, possibly because under natural conditions, the watercress is rooted in sediment containing on average approximately 35 mg kg(-1) arsenic. It is recommended that watercress from the Waikato River, or other areas with elevated water arsenic concentrations, should not be consumed.     

Causes of seepage water in drainage and grouting galleries of the Pandoh Dam, Central Himalaya

At the Pandoh Dam in the Central Himalaya, a reddish brown material was observed seeping through drainage holes in three of the galleries. Initially considered to be phyllitic oxide, this was chemically analysed and found to be sulphate radicals. A sulphate concentration of 861.50 ppm was recorded in the seepage water. Petrography of the bedrocks and X-ray analysis of the suspended reddish brown powder as well as chemical analysis of the seepage water revealed the presence of chalcopyrite, pyrrhotite and the conversion of monosulphate phases into ettringite phases as the major cause of expansion and seepage. This process is accompanied by a significant volume increase which it was concluded was responsible for the internal stresses causing the cracking through which the seepage water entered the drainage and grouting galleries.     

Experimental investigation of compression ignition engine fuelled by a catalytic fuel reformer

Waste engine oil (WEO) as an alternative fuel for compression ignition (CI) engine is investigated in this study. WEO was thermally cracked with alumina catalyst in the catalytic fuel reformer (CFR). The gas obtained from the CFR was condensed using a water-cooled condenser for analytical purposes. The output of the condenser was named as WEOA (reformulated WEO with alumina catalyst). The different chemical properties of WEOA were analysed. The compositional analysis for diesel and WEOA was made using Fourier transform infra-red (FT-IR) and gas chromatography–mass spectrometer (GC–MS). The experimental investigation was conducted in a single-cylinder diesel engine and the performance and emissions were compared with those of diesel fuel. Experimental results concluded that the performance and emission level are better than those of diesel fuel. This study concludes that environmentally hazardous waste material such as WEO is recycled and converted into a useful resource and serves as an alternative source of fuel for CI engine.     

Partition of tannery wastewater proteins in aqueous two-phase poly (ethylene glycol)-magnesium sulfate systems: Effects of molecular weights and pH

The partitioning behavior of soluble proteins from tannery wastewater using aqueous two-phase system (ATPS) was investigated. An ATPS polyethylene glycol (PEG)/MgSO₄ was examined with regard to the effects of PEG molecular weight (MW) and concentration, MgSO₄ concentration, pH and NaCl concentration on protein partition and extraction. The partition coefficients measured for soluble proteins were proportional to the difference in PEG concentration between the phases. The MW and concentration of PEG were found to have significant effects on protein partition and extraction with low MW PEG4000 showing the best conditions for the partitioning of protein in PEG+MgSO₄+water system. Sulfate salt was chosen as the phase-forming salt because of its ability to promote hydrophobic difference between the phases. This system was operated at room temperature . Increase in pH of the system increases the partition coefficient of proteins from tannery wastewater. The addition of sodium chloride showed significant influence on the partition coefficient. ATPS comprising PEG4000-magnesium sulfate provided a means for the recovery of proteins from tannery wastewater. The maximum percentage yield of protein extracted is 82.68%.     

Effect of Processing Conditions on Flexural Strength Properties of Chicken Feather Fibre (CFF) and Its Hybrid Composites with Polypropylene Resin

ABSTRACT

This study discusses the effect of molding temperature, pressure and time on the final compression-molded hybrid composites with polypropylene resin for its flexural strength. The results of tests conducted to characterize the hybrid composites developed with different proportion of fibers and processing conditions are discussed in this study. When comparing the overall results on the flexural strength of the composites, 25:75 Chicken Feather Fiber (CFF)/Jute composite showed highest flexural strength by keeping minimum temperature, maximum pressure and medium time. The influence of pressure on flexural strength is significant compared to temperature and time. As time increases the flexural strength decreases.     

Poly(amino acid)-facilitated electrochemical growth of metal nanoparticles

Poly(amino acids) are natural chelating agents for various metal ions. Zinc ions were encapsulated in situ in a conductive polypyrrole film using polyglutamic acid as a localized complexing agent within the film. The subsequent electrochemical reduction of the metal ions to zero-valent metal leads to the formation of the nanoparticles. The electrochemical approach demonstrated in this report provides facile regeneration of the particles and also prevents aggregation of nanoparticles in the conductive polymeric film. The correlation of the amount of zinc with the thickness of the film indicates that the zinc resides largely in the outer layer of the film. TEM and EDS data show that the nanoparticles formed are composed of zinc and are 18 +/- 7 nm in diameter. The nanoparticle/ polymer composite was used to reduce halogenated organics, indicating its potential usefulness in remediation applications.     

Transparent anti-stain coatings with good thermal and mechanical properties based on polyimide-silica nanohybrids

In this work, we synthesized polyimide/silica hybrid materials via sol-gel method using a fluorinated poly(amic acid) silane precursor and a variety of perfluorosilane contents. We studied the influence of a hybrid coating film with the following characteristics; hydrophobicity, oleophobicity, optical transparency, and surface hardness of the coating films. The hybrid coatings with the fluorosilane contents up to 10 wt% are optically transparent and present good thermal stability with a degradation temperature of > 500 degrees C as well as a glass transition of > 300 degrees C. Both water contact angle and oil contact angle increase rapidly with introducing small amount of the fluorosilane in the hybrids and reaches the maximum of 115 degrees and 61 degrees, respectively. The hardness of the hybrid coatings increases up to 5H with an increase of the FTES content in the hybrids. These colorless, transparent, and thermally stable hybrid materials could be suitable for applications as anti-stain coatings.     

Synthesis, characterization, and antimicrobial activity of nano-hydroxyapatite-zinc for bone tissue engineering applications

The bone implants used in tissue repair are susceptible to infections caused by staphylococci, specifically Staphylococcus aureus. Hence, the development of better biological materials that provide antimicrobial activity in bone tissue engineering is required. The nanoparticles of hydroxyapatite (nHAp) and nHAp dopped with Zn (nHAp-Zn) were prepared by the wet chemical method and the ion exchange method, respectively. They were characterized using SEM, AFM, FTIR and XRD. The antibacterial activity of nHAp and nHAp-Zn was determined with Gram-negative and Gram-positive bacterial strains. The results indicated that nHAp alone was acting as an inert matrix and when substituted with Zn, it showed better antibacterial activity. The nHAp-Zn was found to be non-toxic to osteoprogenitor cells. Thus, due to the antimicrobial property of nHAp-Zn nanoparticles, we suggest that they would have potential applications towards bone tissue engineering.     

Improving the mechanical properties of 2024 Al alloy by cryo rolling

Ultra fine grained (1 micron size) materials usually exhibit more strength. Most of the approaches to refine microstructure lead to decrease in ductility. Cryo rolling is a successful technique; samples are rolled at cryogenic temperature, to improve strength of an age hardenable alloy with minimum loss in ductility. Aging after cryo rolling ensures good strength and ductility due to bimodal structure and nano sized precipitation of S’ phase. Al 2024 alloy are partially solutionised to retain some T-phase particles, which are very effective in accumulating dislocations during cryo-rolling, and in turn promoted the precipitation of Al₂CuMg precipitates with a size of 10–40 nm. The nano sized Al₂CuMg precipitates and bimodal grain structure leads to simultaneous increases in strength and ductility.     

Combustion characteristics of a stationary diesel engine fuelled with a blend of crude rice bran oil methyl ester and diesel

The objective of the present work is to analyze the combustion characteristics of crude rice bran oil methyl ester (CRBME) blend (20% of CRBME with 80% no.2 diesel on volume basis) as a fuel in a stationary small duty direct injection (DI) compression ignition (CI) engine. When operating with CRBME blend the cylinder pressure was comparable to that of diesel. It was observed that the delay period and the maximum rate of pressure rise for CRBME blend were lower than those of diesel. The occurrence of maximum heat release rate advanced for CRBME blend with lesser magnitude when compared to diesel. CRBME blend requires more crank angle duration to release 50% & 90% of heat when compared with diesel. The brake specific fuel consumption of CRBME blend was found to be only marginally different from that of the diesel and its hourly fuel cost was higher than that of diesel. CRBME blend has lower smoke intensity and higher NOx emission than those of diesel. Since the measured parameters for CRBME blend differs only by a smaller magnitude, when compared with diesel, this investigation ensures the suitability of CRBME blend as fuel for CI engines with higher fuel cost.