Simple synthesis of ZnS nanoparticles in alkaline medium

ZnS nanoparticles were successfully synthesized by reflux under an alkaline medium. The nanoparticles were characterized by using X-Ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The optical properties of ZnS nanoparticles were examined by photoluminescence (PL) spectrum. The result shows that the as-synthesized ZnS nanoparticles had a cubic phase. SEM image shows that ZnS nanoparticles are basically in spherical shape and are homogeneous. The particle size was found to be in the range of 18 nm.     

Modulation of (+/-)-anti-BPDE mediated p53 accumulation by inhibitors of protein kinase C and poly(ADP-ribose) polymerase

The rapid accumulation of the p53 gene product is considered to be an important component of the cellular response to a variety of genotoxins. In order to gain insights on the biochemical pathways leading to p53 stabilization, the effect of (+/-) 7,8-dihydroxy-anti-9, 10-epoxy-7,8,9,10-tetrahydrobenzo(a)-pyrene [(+/-)-anti-BPDE] induced DNA damage on p53 protein levels was investigated in various repair-proficient and repair-deficient human cells. Brief exposure of normal human fibroblasts to 0.05-1 microM (+/-)-anti-BPDE resulted in elevated p53 protein levels as compared to the constitutive levels of control cells. The rapid induction response, detectable within a few hours, was sustained up to a period of at least 24 h. Repair-proficient and repair-deficient (XPA) human lymphoblastoid cells showed a similar response. The poly(ADP-ribose) polymerase inhibitor, 3-aminobenzamide (3-AB), diminished the p53 induction response by concomitantly decreasing the extent of (+/-)-anti-BPDE induced DNA damage in cells pretreated with the inhibitor. However, the direct involvement of poly ADP-ribosylation was also apparent as 3-AB was able to attenuate (approximately 50%) the p53 response by post-damage inhibitor treatment of the cells. Inhibition of cellular DNA replication by hydroxyurea and AraC, in the presence or absence of DNA damage, also resulted in rapid p53 accumulation in repair-deficient cells. On the contrary, inhibition of protein kinase C (PKC) by calphostin-C led to an abrogation of (+/-)-anti-BPDE mediated p53 induction. Analysis of the downstream effects of carcinogen treatment showed that the lymphoblastoid cells undergo DNA fragmentation indicative of apoptosis while fibroblasts exhibit cell cycle arrest at the G1-S boundary.     

Evaluation of connection flexibility in cold formed steel racks

Steel storage racks are three-dimensional framed structures fabricated from cold formed steel sections, wherein hook-in end connectors are used to make beam-column connections which are basically boltless and semi-rigid in nature. Different types of beam end connectors with different geometry of the connected members are available, making it impossible to develop a generalized analytical model. Only very few theoretical models are available to evaluate the performance of the joints for some typical connectors. More often experimental evaluation and numerical studies are needed to predict the behaviour of every different type of connectors. In the present study eighteen experiments were conducted on a commercially available pallet rack connection by varying the most influencing parameters such as thickness of the column, depth of the connector and the depth of the beam. The main objective of this work is to quantify the beam to column joint, flexibility of commonly used pallet rack frame and to develop a general Frye-Morris type/three parameter power model type moment versus relative rotation relationship. A companion finite element shell model that simulates the experimental behaviour closely is developed using ABAQUS finite element software, which is also used for further parametric studies. Using the three major variables as size parameters, a Frye-Morris type of equation has been proposed. Some calibration studies have also been carried out. Using the ultimate moment capacity, initial connection stiffness and the shape parameter obtained, a three parameter power model has also been proposed to represent the moment-rotation behaviour of the boltless connections.     

Hydrogen Generation from CO2 Reforming of Biomass-Derived Methanol on Ni/SiO2 Catalyst

Topics in Catalysis - CO2 reforming of methanol for producing hydrogen was experimentally carried out in a fixed-bed reactor on 10%Ni/SiO2. The 10%Ni/SiO2 was completely reduced during H2...     

Effect of silane functionalized alumina on poly(vinyl butyral) nanocomposite films: Thermal,mechanical, and moisture barrier studies

In this work, a hybrid‐polymer nanocomposite film, based on polyvinyl butyral/amino‐silane functionalized nano alumina, was fabricated by melt processing. The calcium degradation measurements suggest the functionalized nanocomposite films exhibit higher resistance towards moisture penetration as compared to the neat alumina loaded films. Thermal stability, mechanical strength, and contact angle studies of the composites were also conducted to evaluate the performance of the functionalized alumina loaded films. These nanocomposite films were encapsulated over Al/P3HT/ITO Schottky structured device. The changes observed in the current density of the devices to the applied voltage before and after accelerated aging conditions are presented. The nanocomposite with functionalized alumina films exhibits 50% change in current density, which is superior to that attained with neat and non‐functionalized films. POLYM. COMPOS., 35:1426–1435, 2014. © 2013 Society of Plastics Engineers     

Natural convection in an enclosure with a localized nonuniform heat source on the bottom wall

Natural convection in an air filled enclosure with a localized nonuniform heat source mounted centrally on the bottom wall is numerically investigated. The vertical walls are cooled while the top wall and the remaining portions of the bottom wall are insulated. The heat source is assumed to be isothermal with a linearly varying temperature. The governing equations were solved using finite volume method on a uniformly staggered grid system. The computational results are presented in the form of isotherm and streamline plots and Nusselt numbers. The effects of the source nonuniformity parameter, λ and the line source length, ε are investigated for the Grashof numbers Gr = 10⁶ and 10⁷. It is found that for Gr = 10⁶ nonuniform heating of the line source enhances the overall heat transfer rate markedly compared to uniform heating of the heat source whereas for Gr = 10⁷ its effect is marginal.     

Technical note: Rotational transformation of remotely sensed data for land use classification

In this paper, the rotational transformation process is explained as a problem of rotation of remotely sensed data in the variance-covariance space. In particular, the rotation which maximizes the covariance-variance ratio is examined in detail for various land use and land cover classes in the Bombay suburban and Thana district area in India. A statistical approach to determine transformed components and other statistical variables on different band combinations is discussed. The results are analysed, and the best possible combinations selected for accurate classification are presented.     

Studies on the chlorination of zircon: Part I. Static bed investigations

Carbochlorination is an important unit operation in the processing of zirconium resources. In the article, the use of different reducing agents in zircon chlorination, to produce zirconium tetrachloride, has been examined on thermodynamic and other considerations. While numerous workers have investigated zircon chlorination, a literature survey shows that there is a wide variation in the reported effect of various process parameters on the chlorination rate and a wide scatter in the values for kinetic parameters such as order of reaction, activation energy, rate constant as also the rate law expression. This work is an extensive study on zircon chlorination and the article discusses the effect of process parameters such as charge particle size, gas and solid composition, gas flow rate, temperature, reaction duration, etc. on the chlorination rate, over a much wider range of the parameter values. During investigations in the static bed chlorinator, it was noticed that the initial rate and the total extent of chlorination are proportional to the exposed surface of the solid zircon-coke charge but independent of the depth or amount of the charge. Further, the stalled chlorination could be reactivated by remixing the solid charge. Also, while the reaction rate in general increased as the charge became finer, the effect of zircon particle size was much more predominant. The activation energy value for the chlorination showed a wide variation with other operating conditions. Likewise, the order of reaction with respect to chlorine decreased from two to zero as the chlorine concentration in the gaseous atmosphere increased. Interestingly, the chlorination rate initially increased with gas flow rate, then decreased, before finally becoming independent of the gas flow rate. Results also indicated that there is an optimum charge composition that yields the maximum chlorination rate and the article discusses the effect of the zircon to coke particle number ratio in the initial charge on the chlorination kinetics. With the help of these observations, it is possible to explain the wide variation in the reported effect of the various process parameters on zircon chlorination.     

Fabrication and characterization of TiO2 nanotube by hydrothermal method in the design of DSSC

In this work it was presented a direct formation of anatase TiO₂ nanotube by titanium powder using, as source material. TNT was prepared by hydrothermal synthesis method using with successive acid and heat treatment. This method proves a new route to fabricate DSSC with high electron to photon conversion efficiency. The phase identification of the samples was conducted with powder X-ray diffraction (XRD). The morphologies and structure of samples were observed through SEM and TEM. The results of the investigation showed that the anatase TiO₂ nanotubes have the outer diameters of around 10 nm. We fabricated DSSC with this well-aligned one-dimensional (1-D) titania nanotubes (TNT) on indium tin oxide (TCO) by doctor blading technique. The fabricated TNT photoelectrode showed 1.64% efficiency whereas the composite photoanode with the mixture of TNP + 30% TNT gives 2.06%. This method will surely be an exciting addition to the fast growth family of synthesis of oriented TiO₂ nanotubes.