Combined influence of throughflow and Soret effect on the onset of Marangoni convection

The onset of Marangoni convection with throughflow and the Soret effect in a top-free and bottom-rigid horizontal fluid layer is studied using the normal mode method for different types of thermal and solutal boundary combinations. The bottom surface is either conducting or insulating to temperature and solute concentration perturbations. The resulting eigenvalue problem is solved exactly by assuming that stationary convection is exhibited at the neutral state. It is found that the destabilizing behavior of a small amount of throughflow described by Nield (J Fluid Mech 185:353–360, 1987) becomes more significant in the presence of Soret effect for some boundary combinations. The results are consistent with the existing results in the literature.     

Influence of oxygen pressure on structural,optical and magnetic properties of pure ZnO films

In this paper, we study the influence of oxygen pressure on structural, optical and magnetic properties of pure ZnO films. The chemical compositions and thickness of the film were estimated by Rutherford backscattering spectrometry measurements. X-ray diffraction patterns show all the films are in single phase and preferred along (002) orientation. With an increase of oxygen pressure, grain growth and average root mean square roughness is found to be increased. It is found that the intensity of UV emission peak increases whereas visible emission peak decreases in intensity with an increase of oxygen pressure. From the magnetization measurements, it is observed that ZnO film grown without oxygen pressure shows an enhanced ferromagnetic behaviour than that of the films grown with oxygen pressure of 0.05 and 0.1 mbar.     

Solubility of Mn stabilized cubic zirconia nanostructures

Mn-stabilized cubic zirconia nanostructures (Zr_1?xMn_xO₂, x = 0.10, x = 0.15 and x = 0.20) have been prepared using chemical precipitation method for different doping concentrations. The prepared powders have been characterized by X-ray diffractometer for structural analysis, vibrating sample magnetometer for analyzing magnetic properties, scanning electron microcopy–elemental compositional analysis using X-ray for morphological and elemental compositional analysis. Room temperature ferromagnetism has been found at around x = 0.15. For high doping effect of Mn impurity at host lattice, secondary phase has been detected at around x = 0.20 when exceeding the solubility limit of cubic zirconia. Due to ferromagnetic behavior, Mn doped ZrO₂ nanostructures can be considered as good candidates for spintronics applications within their solubility limit.     

Texture evolution in an Al–Cu alloy during equal channel angular pressing: the effect of starting microstructure

In this article, the effect of initial microstructure on the texture evolution in 2014 Al alloy during equal channel angular pressing (ECAP) through route A has been reported. Three heat treatment conditions were chosen to generate the initial microstructures, namely (i) the recrystallization anneal (as-received), (ii) solution treatment at 768 K for 1 h, and (iii) solution treatment (768 K for 1 h) plus aging at 468 K for 5 h. Texture analyses were performed using orientation distribution function (ODF) method. The texture strength after ECAP processing was different for the three samples in the order, solutionised > solutionised plus aged condition > as-received. The prominent texture components were A _E /[`(A)]<sub>E</sub> \bar{A}_{E} and B <sub>E</sub> /[`(B)]_E \bar{B}_{E} in addition to several weaker components for the three materials. The strong texture evolution in solutionised condition has been attributed to higher strain hardening of the matrix due to higher amount of solute. In case of the as-received as well as solutionised plus aged alloy, the weaker texture could be due to the strain scattering from extensive precipitate fragmentation and dissolution during ECAP.     

Drying and energy aspects of tapioca sago processing-an experimental field study

Journal of Mechanical Science and Technology - The drying characteristics of tapioca sago were studied using four different drying methods—Open sun drying (OSD), Conveyor belt drying (CBD),...     

Comparison of inter- and intra-chromosomal aberrations in blood samples exposed to different dose rates of gamma radiation

Peripheral blood samples obtained from a normal healthy volunteer were exposed in vitro to gamma radiation with various doses at different dose rates of 1.0, 0.1 and 0.0014 Gy min(-1). The exposed samples were analysed for different chromosomal aberrations such as dicentrics (DC), centric rings (CR) and double-minutes (DM). The ratio of DC chromosomes (inter) to the total number of centric rings (CR) and double-minutes (DM) (CR + DM = intra) were analysed for all the three dose rates. The study showed that the frequency of inter-arm chromosomal aberrations was more then three times higher than that observed with intra-arm chromosomal aberrations in samples exposed at a dose rate of 1.0 and 0.1 Gy min (-1). However, the frequency of inter- and intra-arm chromosomal aberrations were almost same (ratio 1:1) in samples exposed at a dose rate of 0.0014 Gy min(-1). This paper discusses the usefulness of the ratio of inter- and intra-arm chromosome aberration in finding out whether the sample was exposed to high or low dose rate radiation.     

Diskitis caused by Actinobacillus actinomycetemcomitans

A 32-year-old man with acquired immunodeficiency syndrome (AIDS) admitted to the hospital for treatment of visceral leishmaniasis was inadvertently given 10 times the prescribed first dose of sodium stibogluconate ([Sb] 6.5 g instead of 0.65 g). He experienced no immediate major toxicity during the first 48 hours, but a significant rise of pancreatic enzyme activities was observed (amylase at 10 times the upper limit of normal, lipase at 50 times the upper limit of normal) without clinical signs or indications on computed tomography (CT) of pancreatitis. The third day after the overdose, he developed appendicitis, which appeared coincidental; he recovered uneventfully from surgery. Most of the overdose of Sb was eliminated within the first few hours. Pharmacokinetics remained linear; the rapid, long elimination half-lives (2.7 hours and 54 hours, respectively) were similar to those in previously published results. The administration of a chelating agent, dimercaptosuccinic acid (DMSA), 72 hours after the Sb overdose did not modify the pharmacokinetics of the medication.     

Two 1-Server n-Unit Systems with Preventive Maintenance and Repair

This paper deals with the availability and reliability analysis of two different 1-server n-unit systems with preventive maintenance and repair. Initially, one unit operates and the remaining n - 1 units are kept as cold standbys. In the first system the time to failure and the time to preventive maintenance of a unit are arbitrarily distributed. In the second system, each unit consists of 2 components connected in series. When a unit fails, the failed component is taken up for repair while the other waits for preventive maintenance. Explicit expressions for the Laplace transform of the mean down-time of the system in [0, t] and for the mean time to system failure are obtained. Steady-state availability of the system is also discussed. A few special cases have been studied.     

A simple envelope detector

The use of integration and differentiation as Hilbert transformers for envelope detection is considered. The resulting detectors are causal and do not require exact knowledge of carrier phase or frequency. The method requires square and square root operations, but no multiplication. An upper bound is established for magnitude error