A solar still augmented with a flat-plate collector

A single-stage, basin-type solar still and a conventional flat-plate collector were connected together in order to studythe effect of augmentation on the still under local conditions. The still inlet was connected to a locally made, fin-tube collector such that its outlet was fed to the still basin instead of the common storage tank. Measurements of various temperatures, solar intensities and distilled water productions were taken for several days at various operating conditions. Several modes of operation were studied: still connected to collector for a 24-h period; still connected only during sunlight hours from 8 am to 5 pm, and still operating alone for a 24-h period. These tests were performed using tap water and saline water as a feed. It was found that the mass of distilled water production using augmentation was increased by 231% in the case of tap water as a feed and by 52% in the case of salt water as a feed.     

Temperature variation in high slump drilled shaft concrete and its effect on slump loss

Drilled shaft refers to a deep foundation system where a single large diameter pier is used to replace a whole group of piles. High slump self-compacting concrete is used in drilled shafts due to its high fluidity and less proneness to segregation. The Florida Department of Transportation (FDOT) specifications require that such concrete should have a slump between 7 and 9 in. when placed and should maintain a slump of 4 in. or more throughout the concrete placement time. Furthermore, the mix for the slump loss test should be prepared at a temperature consistent with the highest ambient or initial concrete temperature (whichever is greater) expected during actual concrete placement. It is possible that the temperature of concrete inside the drilled shaft is lower than the ambient or initial concrete temperature due to the presence of ground water. If that is the case, slump loss would be less than the loss determined at the highest ambient or the initial concrete temperature, making the FDOT requirement unrealistic. However, it should be experimentally verified. This experimental study was conducted with the objective to establish profiles of concrete temperature in time from placement to hardening along depth as well as across width of the drilled shaft. Based on the gathered data, it was found that no significant temperature differential existed along the depth and across the width of the drilled shaft during the initial setting of concrete. The temperature of concrete inside the drilled shaft was same as initial concrete temperature before placement at all locations. This finding leads to the conclusion that concrete temperature inside drilled shaft is not affected by ambient temperature and/or the underground temperature conditions.     

Electromechanical properties of ternary BiFeO<Subscript>3</Subscript>−0.35BaTiO<Subscript>3</Subscript>–BiGaO<Subscript>3</Subscript> piezoelectric ceramics

In the present work, composition dependent crystal structure, ferroelectric, piezoelectric, and temperature dependent dielectric properties of the BiGaO₃-modified (1–x)(0.65Bi_1.05FeO₃–0.35BaTiO₃) (BFBT35–xBG, where x?=?0.00–0.03) lead-free ceramics were systematically investigated by solid-state reaction method, followed by water quenching process. The substitution of BG successfully diffuses into the lattice of the BFBT ceramics, without changing the pseudo-cubic structure of the samples. The scanning electron microscopy (SEM) results revealed that the average grain size was increased with BG-content in BFBT system. The BFBT–xBG ceramics showed a maximum in permittivity (?_max) at temperatures (T_max) above 500 °C in the compositional range of 0.00?≤?x?≤?0.03. The electro-strain is measured to be 0.125% (d^*₃₃ ~ 250 pm/V) under unipolar fields (5 kV/mm) for BFBT–0.01BG ceramics. The same composition (x?=?0.01), large static piezoelectric constant (d₃₃ ~ 165 pC/N) and electromechanical coupling factor (k_p ~ 25%) were obtained. The above investigated characterizations suggests that BFBT–BG material is favorable for piezoelectric and high temperature applications.     

Privacy management of patient physiological parameters

Patient Physiological Parameters (PPPs) seem to be the most extensively accessed and utilized Personal Health Information (PHI) in hospitals, and their utilization by the various medical entities for treatment and diagnosis creates a real threat to patient privacy. This study aims to investigate whether PPPs access in a hospital environment violates patient privacy. If so, to what extent can we manage patient privacy while accessing PPPs in this environment? We investigated this question by analyzing questionnaire-based data from two Asian countries: Group A (China) and Group B (Pakistan). For data collection, we targeted those medical entities which were directly dealing with PPPs in their routine tasks. Results suggest that patient type directly influences the collection of PPPs: Group A (one-time?=?1.9, follow-up?=?1.06) and Group B (one-time?=?2.0 and follow-up?=?1.9). Both groups agreed that patients have the right to control their own PPPs. In both, doctors are the most trusted entity: for Group A, the Pearson Chi-Square with one degree of freedom is 1.414, p?=?0.234, whereas for Group B, the Pearson Chi-Square with three degrees of freedom is 4.511, p?=?0.11. Most of the Group A entities (92%) are familiar with unauthorized access of PPPs, while in Group B the level was only 35%. In Group B, only 35% of entities stated the purpose, specification and use limitations of PPPs. Doctors in both groups showed a high utilization of PPPs read authorization rights. This empirical evidence about PPPs usage in both countries will benefit health technology and improve policy on patient privacy.     

Ultrastructural features of bone marrow cells from patients with acquired sideroblastic anemia

The ultrastructural findings of the bone marrow cells from 15 patients with acquired sideroblastic anemia are presented. The red cell precursors from all patients showed the presence of electron-dense material in the mitochondria, representing most probably iron deposits. A great number of these mitochondria were completely destroyed. The erythropoietic precursors from one of the patients showed markedly elongated mitochondria that measured up to 3 microm. In addition numerous cytoplasmic vacuoles were observed. The red cell precursors from 60% of the patients showed signs of dyserythropoiesis, such as incomplete nuclear division and nuclear distortion. The polymorphonuclears from 47% of the patients presented nuclear abnormalities expressed as nuclear bridges, appendices, and blebs. In addition, phagocytosis of red blood cells was observed. The results of the study underline the advantages of the transmission electron microscope examination in visualization of intricate alterations in hematopoietic cells that cannot be detected with a light microscope.     

Mannose based polymeric nanoparticles for lectin separation

The aim of this work is to synthesize the original, new polymeric nanoparticles for concanavalin A (Con A) purification. Nanoparticles were synthesized by surfactant free emulsion polymerization. In the polymerization prosedure, 1-O-(2′-hydroxy-3′-acryloyloxypropyl)-2,3:5,6-di-O-isopropylidene-α-D-mannofuranose (Man-OPA) was used as co-monomer and 2-hydroxyethylmethacrylate (HEMA) was used as a monomer. Man-OPA was characterized by Fourier Transform Infrared Spectroscopy (FTIR), nuclear magnetic resonance and elemental analysis techniques. Poly(HEMA-Man-OPA) nanoparticles were characterized by scanning electron microscopy, FTIR and Zeta Sizer. In adsorption?desorption experiments, maximum Con A adsorption capacity of poly(HEMA-Man-OPA) nanoparticles was found 630.6 mg/g nanoparticle (pH 7.5, 1.0 mg/mL). Adsorption?desorption experiments were repeated in four times. According to results, these nanoparticles could be used several times without significant decrease in Con A adsorption capacity.     

FTIR Microscopic Studies on Normal, Polyp, and Malignant Human Colonic Tissues

Fourier-Transform Infrared Spectroscopy (FTIR) employs a unique approach tooptical diagnosis of tissue pathology based on the characteristic molecularvibrational spectra of the tissue. The biomolecular changes in the cellularand sub-cellular levels developing in abnormal tissue, including a majorityof cancer forms, manifest themselves in different optical signatures, whichcan be detected in infrared microspectroscopy. This report has two parts. Inthe first part, we report studies on normal, premalignant (polyp) andmalignant human colonic tissues from three patients with different stages ofmalignancy. Our method is based on microscopic infrared study (FTIR-microscopy)of thin tissue specimens and a direct comparison with traditional histopathologicalanalysis, which serves as a gold reference. The limited dataavailable showed normal colonic tissue has a stronger absorption thanpolypoid tumor and cancerous types over a wide region in a total of 100measurements. Detailed analysis showed that there is a significant decreasein total carbohydrate, phosphate and possibly creatine contents for polyp andcancerous tissue types in comparison to the controls. The same trend is maintainedin seven other patients studied. The second part consists of an analysis showingthe influence of various independent factors such as age, sex and grade of malignancy. Ourpreliminary results suggest that among the above three factors, age and gradeof malignancy have significant effect on the metabolites level, but sex has onlyminor effect on the measured spectra. Initial results on Linear DiscriminantAnalysis (LDA) showed good classification between normal and malignant cellsof human colonic tissues.     

Dehydrogenation of ethane to ethylene via radical pathways enhanced by alkali metal based catalyst in oxysteam condition

The dehydrogenation of ethane to ethylene in the presence of oxygen and water was conducted using Na₂WO₄/SiO₂ catalyst at high temperatures. At 923 K, the conversion rate without water was proportional to ethane pressure and a half order of oxygen pressure, consistent with a kinetically relevant step where an ethane molecule is activated with dissociated oxygen on the surface. When water was present, the ethane conversion rate was drastically enhanced. An additional term in the rate expression was proportional to a quarter of the oxygen pressure and a half order of the water pressure. This mechanism is consistent with the quasi‐equilibrated OH radical formation with subsequent ethane activation. The attainable yield can be accurately described by taking the water contribution into consideration. At high conversion levels at 1073 K, the C₂H₄ yield exceeded 60% in a single‐pass conversion. The C₂H₄ selectivity was almost insensitive to the C₂H₆ and O₂ pressures. © 2016 American Institute of Chemical Engineers AIChE J, 63: 105–110, 2017     

An overview of spectrum sensing techniques for cognitive LTE and LTE-A radio systems

Advanced communication systems, such as long term evolution (LTE) and LTE-advanced (LTE-A) systems, promise to increase the number of users with high-speed data exchange. However, it leads to spectrum scarcity because of the huge size of data exchange with limited spectrum resources. Cognitive radio (CR) technique is considered the best solution for this spectrum scarcity problem. Spectrum sensing (SS), one of the CR techniques is used to detect the spectrum hole of primary user (PU) without interference with PU. In this paper, several SS approaches for LTE and LTE-A systems are investigated in the CR system. These SS approaches are based on two techniques, namely energy detection and cyclostationary feature detection techniques. The first technique includes four approaches of auto-correlation based advanced energy, time domain detection, Welch periodogram and two-stage model algorithms, while the second technique contains two approaches, namely pilot induced cyclostationary and second order cyclostationary algorithms. According to the analysis, the two-stage model and the second order cyclostationary algorithms are better than the other algorithms because they produce accurate results at the expense of system complexity. Hence, in general a good SS algorithms would require some trade-off between complexity and accuracy.     

Centralized dynamic frequency allocation for cell-edge demand satisfaction in fractional frequency reuse networks

Fractional frequency reuse (FFR) has emerged as a well-suited remedy for inter-cell interference reduction in the next-generation networks by allocating frequency reuse factor (FRF) of unity for the cell-center (CC) and higher FRF for the cell-edge (CE) users. However, this strict FFR comes at a cost of equal partitioning of frequency resources to the CE which most likely has varying demands in current networks. In order to mitigate this, we propose a centralized dynamic resource allocation scheme which allocates demand-dependent resources to CE users. The proposed scheme therefore outperforms the fixed allocation scheme of strict FFR for both CC and CE users. Complexity analysis provides a fair means of analyzing the suitability of proposed algorithm. We have also compared the proposed methodology with a reference dynamic fractional frequency reuse (DFFR) scheme. Results show maximum performance gain of up to 30% for 3 reference cells employing Rayleigh fading—through normalized area spectral efficiency (ASE) analysis for both fixed allocation and DFFR. Spectral efficiency analysis also indicates per-cell performance gain for both CC and CE users. Further, detailed three-dimensional ASE plots give insights into the affects to other cells. Due to dynamic nature of traffic loads, the proposed scheme is a candidate solution for satisfying the demands of individual cells.