Fatigue striation in a wide range of crack propagation rates up to 70 μm/cycle in a ductile structural steel

The relationship between striation spacing and fatigue crack propagation rate up to 70 m/cycle was investigated for a ductile structural steel, qualified as JIS SM58Q. A modified compact-type specimen 400 mm wide and a centre-cracked specimen 200 mm wide were tested at a stress ratio, R, of 0 and 0.8. The fracture surface of the specimen was examined in detail under a scanning electron microscope. The crack propagation rate was expressed by a power function of the range of stress intensity factor from 0.1 to 70 m/cycle for R=0 and to 0.5 m/cycle for R=0.8. The striation spacing coincided with the fatigue crack propagation rate over the range 0.1 to 70 m/cycle. The profile of striation was found to be a ridge and valley type, and the ridges on one fracture surface coincided with those on the matching surface. It is suggested that the striation is formed by a plastic blunting mechanism.     

Experience with radio isotope myelography from neurosurgical aspects (author's transl)

Experience with Radio Isotope Myelography is reported here. 169Yb-DTPA as a tracer was intrathecally injected at lumbar region in twenty three patients with various spinal cord lesions. The first scanning is perfomed after comfirming by gamma-camera that the tracer reaches to the lesion, the second and the third scannings are done according to the ascending rate of the tracer. (I) Normal scintimyelogram (A) In normal case, the shape of the Radio Isotope Myelogram well corresponds the shape of anatomical subarachnoid space. (B) In normal adult cases, the tracer comes up to the cisterna magna in 20-25 minutes after the lumbar injection. Therefore, the scintimyelographic diagnosis should be made not only by the shape but also by the ascending rapidity of the tracer. (II) Abnormal scintimyelogram Abnormal scintimyelograms could be summarized as following three categories. (A) "Delay": It means delay of the ascending of the tracer. Besides, "Transient delay" found in a case of Arnord-Chiari's malformation was proposed. (B) "Partial block": It meas a defect at the level of the lesion. This "Partial block" were observed in cases of spinal cord angioma, cervical spondylosis and spinal cord tumor etc. (C) "Complete block": It means the stagnation of the tracer below the lesion. To sum up, Rario Isotope Myelography, especially in partial block, can more easily and more sensitively represent the maximum extent of the spinal cord lesion than other myelographic study or angiographic one. On the other hand, we can not qualitatively diagnose about the lesions by its indistinct border.     

Hydrothermal preparation of tailored hydroxyapatite

Hydrothermal vapor treatment method was applied for preparation of ceramic biomaterials. Hydroxyapatite (Ca₁₀(PO₄)₆(OH)₂; HA) ceramics prepared by sintering with random crystal surface have already been used as bone-repairing materials which can directly bond to natural bones. If materials of HA could have the tailored specific crystal surface, they should have the advantage of adsorptive activity and osteoconductivity in comparison with the sintered HA. In the present study, porous HA sheets of about 50 μm to 1 mm in thickness and porous HA granules of about 50 μm to 1 mm in size with tailored crystal surface were prepared by the hydrothermal vapor exposure method at temperatures below 200°C. Porous sheets and porous granules of HA with controlled crystal surface should be suitable for scaffold of cultured bone, for bone graft material and for drug delivery system (DDS).     

Electrical Inhomogeneity at the Mott Transition in the Band Width Controlled κ-(BEDT-TTF)2Cu[N(CN)2Br

The electronic phase separation on macroscopic scale is studied in the organic Mott system κ-(BEDT-TTF)₂Cu[N(CN)₂]Br by means of scanning microregion infrared spectroscopy using the synchrotron radiation. The phase separation appears in the vicinity of the Mott boundary in the single crystals of which the band width is controlled by partly substituting the BEDT-TTF molecule with the deuterated one. The transport properties under the phase separation are considered to be influenced by the percolation process of the domains.     

Surface modification of biodegradable plastics by ion beams

Biodegradable plastics can be used as conventional plastics, while on disposal they decompose to water and carbon dioxide by microorganisms existing in natural environment. Products using biodegradable plastics have recently been developed in many companies pursuing ecology. In this study, surface modification of biodegradable plastics was carried out by inert ion beams for improvement of photo deterioration under an ultraviolet ray. The hardness of biodegradable plastics tended generally to decrease with irradiation of an ultraviolet ray. In this method, the hardness of ion-bombarded biodegradable plastics was kept at an initial value under an ultraviolet ray, because the modified layer by ion bombardment intercepted an ultraviolet ray. The hardness of He⁺ ion-bombarded biodegradable plastics showed larger value than that of Ar⁺ ion bombardment. He⁺ ion bombardment at ion energy of 10 keV produced the suitable property with both of high transmittance of a visible ray and high interception of an ultraviolet ray in a surface layer of biodegradable plastics.     

Simulation research on monomer agglomeration of nonmetallic inclusions in steel with a diffusion limited aggregation model

The monomer agglomeration of nonmetallic inclusions was simulated with a diffusion limited aggregation （DLA） model of the fractal theory. The simulation study with a random two-dimensional diffusion was carried out. The results indicate that the DLA model can be used for the simulation of agglomeration behavior of the cluster-type inclusions. The morphology of clusters was observed with SEM and compared with the simulated agglomerates. The modelling procedure of the DLA model is applicable for the agglomeration process. The uncertainty of agglomeration process and the persuasive average agglomerative ratio was analyzed. The factors about the agglomerative ratio with the collision path distance and the size of particles or seed were discussed. The adherence of the nonmetallic inclusions on the dam, the weir and the walls of a tundish, and the absorption of inclusions by stopper or nozzle were also discussed.     

Constant-ratio-coupled multi-grain digital synchronizer with flexible input-output delay selection for versatility in low-power applications

The constant-ratio-coupled multi-grain digital synchronizer (CRC-MGsynchronizer) is proposed as a means for making high-speed connections with very low power consumption, both among multiple chips such as processors, controllers, and storage devices, and among on-chip modules. The synchronizer not only provides a wide range of operating frequencies, but is fast locking and only occupies a small area on chip. Therefore, it contributes to large reductions in power consumption and costs. It is suitable for use in various low-power systems (e.g., battery-hungry mobile appliances and low-cost consumer electronic products). Three major techniques were applied to the design: 1)a multi-grain structure for the delay elements, which greatly reduces the number of gates while facilitating locking in a very small number of clock cycles;2) constant-ratio-coupled (CRC) delay lines (measurement versus generation)for flexible selection of the input-output delay; and 3) a new lock stage decision circuit (LSDC) scheme, conferring excellent testability. Moreover,the architecture is all-digital, and thus it has high process portability. By applying these techniques to a DDR memory interface circuit for a mobile application processor fabricated in 130-nm technology, we were able to reduce power consumption by 42% and chip area by 65% compared with a conventional implementation. Furthermore, the novel design spans a frequency range covering 12 times the minimum frequency.