The effect of nano-size additives on the electrical conductivity of matrix suspension and properties of self-flowing low-cement high alumina refractory castables

Influence of two nano-size additives on electrical properties of suspension matrix of self-flowing low-cement high alumina refractory castable is investigated. For this purpose, castament FS 10 and FS 20 on the basis of polycarboxylate ether were considered. The self-flow value, workability and mechanical strength of the castable are evaluated and their relations with electrical conductivity are determined. Using these relations, the type and optimum amount of proper additive for these refractory castables are determined. It was shown that if the electrical conductivity of matrix suspension is less than 0.71 mS/cm, high alumina low-cement self-flowing refractory castable can be obtained. The best self-flow, sufficient working time and adequate mechanical strength in the castables are obtained with 0.08 wt.% FS 20.     

Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological,Mechanical, and Gas Barrier Properties

Herein, a simple melt-blending method is utilized to disperse of halloysite nanotubes (HNTs) in polystyrene/polyolefin elastomer (PS/POE) blends. Based on morphological studies, the PS/POE/HNT nanocomposite containing up to 3 phr HNTs shows excellent nanofiller dispersion, while those filled with 5 phr HNTs exhibit nanofiller aggregation. To overcome the nanofiller aggregation issue, the polypropylene-grafted-maleic anhydride (PP-g-MA) compatibilizer is added to the PS/POE/HNT nanocomposite, which results in improved mechanical properties for the nanocomposite sheets. Furthermore, the addition of compatibilized HNTs to the PS/POE blends leads to decreased O₂ and N₂ gas permeabilities. Besides, incorporating POE, HNTs, and PP-g-MA leads to a decrease in water vapor transmission of PS. In the end, the experimentally-determined mechanical properties and gas permeabilities of the nanocomposite sheets are compared to those predicted by prevalent theoretical models, revealing a good agreement between the experimental and theoretical results. Molecular-dynamics simulations are also carried out to calculate the gas diffusion coefficients in the different sheets to further support the experimental findings in this study. Overall, the PS/POE/HNT/PP-g-MA nanocomposite sheets fabricated in this work demonstrate excellent mechanical and gas barrier properties; and hence, can be used as candidate packaging materials. However, the strength of the resulting PS/POE blend may be inferior to that of the virgin PS.     

Molecular dynamics simulations of vinyl ester resin monomer interactions with a pristine vapor-grown carbon nanofiber and their implications for composite interphase formation

A molecular dynamics simulation study was performed to investigate the role of liquid vinyl ester (VE) resin monomer interactions with the surface of pristine vapor-grown carbon nanofibers (VGCNFs). These interactions may influence the formation of an interphase region during resin curing. A liquid resin having a mole ratio of styrene to bisphenol-A-diglycidyl dimethacrylate VE monomers consistent with a commercially available 33 wt.% styrene VE resin was placed in contact with both sides of two pristine graphene sheets overlapped like shingles to represent the outer surface of a pristine VGCNF. The relative monomer concentrations were calculated in a direction away from the graphene sheets. At equilibrium, the styrene/VE monomer ratio was higher in a 5 Å thick region adjacent to the nanofiber surface than in the remaining liquid volume. The elevated concentration of styrene near the nanofiber surface suggests that a styrene-rich interphase region, with a lower crosslink density than the bulk matrix, could be formed upon curing. Furthermore, styrene accumulation in the immediate vicinity of the nanofiber surface might, after curing, improve the nanofiber–matrix interfacial adhesion compared to the case where the monomers were uniformly distributed throughout the matrix.     

A Comprehensive Experimental Study on Finishing Aluminum Tube by Proposed UAMAF Process

In this paper, a new noncontact ultrasonic magnetic abrasive finishing mechanism is presented. An ultrasonic vibration producer is used to vibrate the permanent magnets. The ferromagnetic steel grits in the created magnetic field form a flexible finishing tool. To take advantage of cavitation collapse pressure, the finishing zone components are immersed in water. The present work also studies the effect of parameters, i.e., time duration for finishing and working gap between magnetic poles and the workpiece on the surface roughness (Ra). The microscopic pictures and the roughness profile diagrams demonstrate the advantages of the proposed method.     

Anisotropic diffusion for noise removal of band pass signals

A noise removal method for band pass signals based on the anisotropic diffusion algorithm originally put forward by Perona and Malik is proposed in this paper. The anisotropic smoothing algorithm proposed here is for band pass signals modulated with a constant carrier frequency. A partial differential equation to smooth band pass noisy signals is derived. The propagator of this differential equation is also analytically calculated in this paper. An appropriate linear operator is then considered here for such band pass signals to form an anisotropic diffusion algorithm. The algorithm proposed here demonstrates better performance for band pass noisy signals containing discontinuities in comparison with the traditional Perona-Malik (PM) algorithm and is robust in the presence of excessive noise with SNR less than unity.     

Blue Light Improves Photosynthetic Performance during Healing and Acclimatization of Grafted Watermelon Seedlings

To investigate the importance of light on healing and acclimatization, in the present study, grafted watermelon seedlings were exposed to darkness (D) or light, provided by blue (B), red (R), a mixture of R (68%) and B (RB), or white (W; 35% B, 49% intermediate spectra, 16% R) LEDs for 12 days. Survival ratio, root and shoot growth, soluble carbohydrate content, photosynthetic pigments content, and photosynthetic performance were evaluated. Seedling survival was not only strongly limited in D but the survived seedlings had an inferior shoot and root development, reduced chlorophyll content, and attenuated photosynthetic efficiency. RB-exposed seedlings had a less-developed root system. R-exposed seedlings showed leaf epinasty, and had the smallest leaf area, reduced chlorophyll content, and suppressed photosynthetic apparatus performance. The R-exposed seedlings contained the highest amount of soluble carbohydrate and together with D-exposed seedlings the lowest amount of chlorophyll in their scions. B-exposed seedlings showed the highest chlorophyll content and improved overall PSII photosynthetic functioning. W-exposed seedling had the largest leaf area, and closely resembled the photosynthetic properties of RB-exposed seedlings. We assume that, during healing of grafted seedlings monochromatic R light should be avoided. Instead, W and monochromatic B light may be willingly adopted due to their promoting effect on shoot, pigments content, and photosynthetic efficiency.     

Reversible robust data hiding based on wavelet filters modification

Multimedia Tools and Applications - In this paper, a new robust reversible data hiding method is proposed. The method is designed based on wavelet modifications which result in a scalable data...     

Missing Link between Helical Nano‐ and Microfilaments in B4 Phase Bent‐Core Liquid Crystals,and Deciphering which Chiral Center Controls the Filament Handedness

The range of possible morphologies for bent‐core B4 phase liquid crystals has recently expanded from helical nanofilaments (HNFs) and modulated HNFs to dual modulated HNFs, helical microfilaments, and heliconical‐layered nanocylinders. These new morphologies are observed when one or both aliphatic side chains contain a chiral center. Here, the following questions are addressed: which of these two chiral centers controls the handedness (helicity) and which morphology of the nanofilaments is formed by bent‐core liquid crystals with tris‐biphenyl diester core flanked by two chiral 2‐octyloxy side chains? The combined results reveal that the longer arm of these nonsymmetric bent‐core liquid crystals controls the handedness of the resulting dual modulated HNFs. These derivatives with opposite configuration of the two chiral side chains now feature twice as large dimensions compared to the homochiral derivatives with identical configuration. These results are supported by density functional theory calculations and stochastic dynamic atomistic simulations, which reveal that the relative difference between the para‐ and meta‐sides of the described series of compounds drives the variation in morphology. Finally, X‐ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) data also uncover the new morphology for B4 phases featuring p2/m symmetry within the filaments and less pronounced crystalline character.