Coating of carbon fibers with adhesion-promoting thin poly(acrylic acid) and poly(hydroxyethylmethacrylate) layers using electrospray ionization

Thin coatings of poly(acrylic acid) (PAA) and poly(hydroxyethylmethacrylate) (PHEMA) were deposited onto carbon fibers by means of the electrospray ionization (ESI) technique in ambient air. These high-molecular weight polymer layers were used as adhesion promoters in carbon fiber–epoxy resin composites. Within the ESI process, the carbon fibers were completely enwrapped with polymer in the upper 10 plies of a carbon fiber roving. As identified with scanning electron microscopy also shadowed fibers in a bundle as well as backsides of fiber rovings were pinhole-free coated with polymers (‘electrophoretic effect’). Under the conditions used, the layers have a granular structure. Residual solvent was absent in the deposit. PAA and PHEMA films did not show any changes in composition and structure in comparison with the original polymers as analyzed by X-ray photo-electron spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Single-fiber pullout tests of coated fibers embedded in epoxy resin showed significantly increased interfacial shear strength. It is assumed that chemical bonds between carbon fiber poly(acrylic acid) and epoxy resin contribute significantly to the improved interactions.     

新型无氨无氯钯镍合金高速电镀液

介绍了Palluna(R)ACF-100钯镍合金电镀工艺,其流程主要包括:碱性除油或电解除油,酸洗,光亮或半光亮镀镍,镍活化,镀钯镍合金,镀硬金或金钴合金.镀钯镍合金的最佳工艺条件为:Pd 15 g/L,Ni 16g/L,温度60℃,pH 5.5,阴极电流密度60 A/dm2.所得合金含钯80%(质量分数),镀速可达14μm/min.镀层结合力好、延展性高,耐磨、焊接性能优良,混合流动气体腐蚀测试结果令人满意.该工艺无氨无氯,操作容易,镀液使用寿命长.     

Evaporation of pyrolysis oil: Product distribution and residue char analysis

The evaporation of pyrolysis oil was studied at varying heating rates (～1–10⁶°C/min) with surrounding temperatures up to 850°C. A total product distribution (gas, vapor, and char) was measured using two atomizers with different droplet sizes. It was shown that with very high heating rates (～10⁶°C/min) the amount of char was significantly lowered (～8%, carbon basis) compared to the maximum amount, which was produced at low heating rates using a TGA (～30%, carbon basis; heating rate 1°C/min). The char formation takes place in the 100–350°C liquid temperature range due to polymerization reactions of compounds in the pyrolysis oil. All pyrolysis oil fractions (whole oil, pyrolytic lignin, glucose and aqueous rich/lean phase) showed charring behavior. The pyrolysis oil chars age when subjected to elevated temperatures (≥700°C), show similar reactivity toward combustion and steam gasification compared with chars produced during fast pyrolysis of solid biomass. However, the structure is totally different where the pyrolysis oil char is very light and fluffy. To use the produced char in conversion processes (energy or syngas production), it will have to be anchored to a carrier. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

Single-Dose P2 X4R Single-Chain Fragment Variable Antibody Permanently Reverses Chronic Pain in Male Mice

Non-opioid single-chain variable fragment (scFv) small antibodies were generated as pain-reducing block of P2X4R receptor (P2X4R). A panel of scFvs targeting an extracellular peptide sequence of P2X4R was generated followed by cell-free ribosome display for recombinant antibody selection. After three rounds of bio-panning, a panel of recombinant antibodies was isolated and characterized by ELISA, cross-reactivity analysis, and immunoblotting/immunostaining. Generated scFv antibodies feature binding activity similar to monoclonal antibodies but with stronger affinity and increased tissue penetrability due to their ~30% smaller size. Two anti-P2X4R scFv clones (95, 12) with high specificity and affinity binding were selected for in vivo testing in male and female mice with trigeminal nerve chronic neuropathic pain (FRICT-ION model) persisting for several months in untreated BALBc mice. A single dose of P2X4R scFv (4 mg/kg, i.p.) successfully, completely, and permanently reversed chronic neuropathic pain-like measures in male mice only, providing retention of baseline behaviors indefinitely. Untreated mice retained hypersensitivity, and developed anxiety- and depression-like behaviors within 5 weeks. In vitro P2X4R scFv 95 treatment significantly increased the rheobase of larger-diameter (>25 µm) trigeminal ganglia (TG) neurons from FRICT-ION mice compared to controls. The data support use of engineered scFv antibodies as non-opioid biotherapeutic interventions for chronic pain.     

More Than Just Simple Interaction between STIM and Orai Proteins: CRAC Channel Function Enabled by a Network of Interactions with Regulatory Proteins

The calcium-release-activated calcium (CRAC) channel, activated by the release of Ca²⁺ from the endoplasmic reticulum (ER), is critical for Ca²⁺ homeostasis and active signal transduction in a plethora of cell types. Spurred by the long-sought decryption of the molecular nature of the CRAC channel, considerable scientific effort has been devoted to gaining insights into functional and structural mechanisms underlying this signalling cascade. Key players in CRAC channel function are the Stromal interaction molecule 1 (STIM1) and Orai1. STIM1 proteins span through the membrane of the ER, are competent in sensing luminal Ca²⁺ concentration, and in turn, are responsible for relaying the signal of Ca²⁺ store-depletion to pore-forming Orai1 proteins in the plasma membrane. A direct interaction of STIM1 and Orai1 allows for the re-entry of Ca²⁺ from the extracellular space. Although much is already known about the structure, function, and interaction of STIM1 and Orai1, there is growing evidence that CRAC under physiological conditions is dependent on additional proteins to function properly. Several auxiliary proteins have been shown to regulate CRAC channel activity by means of direct interactions with STIM1 and/or Orai1, promoting or hindering Ca²⁺ influx in a mechanistically diverse manner. Various proteins have also been identified to exert a modulatory role on the CRAC signalling cascade although inherently lacking an affinity for both STIM1 and Orai1. Apart from ubiquitously expressed representatives, a subset of such regulatory mechanisms seems to allow for a cell-type-specific control of CRAC channel function, considering the rather restricted expression patterns of the specific proteins. Given the high functional and clinical relevance of both generic and cell-type-specific interacting networks, the following review shall provide a comprehensive summary of regulators of the multilayered CRAC channel signalling cascade. It also includes proteins expressed in a narrow spectrum of cells and tissues that are often disregarded in other reviews of similar topics.     

68Ga-Labelled Tropane Analogues for the Visualization of the Dopaminergic System

The development of radiometal-labelled pharmaceuticals for neuroimaging could offer great potential due to easier handling during labelling and availability through radionuclide generator systems. Nonetheless, to date, no such tracers are available for positron emission tomography, primarily owing to the challenge of crossing the blood–brain barrier (BBB) and loss of affinity through chelator attachment. We have prepared a variety of ⁶⁸Ga-labelled phenyltropanes showing that, through a simple hydrocarbon-linker, it is possible to introduce a chelator onto the lead structure while maintaining its high affinity for hDAT (human dopamine transporter) and simultaneously achieving adequate lipophilicity. One of the candidates, [⁶⁸Ga]Ga-HBED-hexadiyne-tropane, showed an IC₅₀ value of 66 nM, together with a log D_7.4 of 0.96. A μPET study in a hemi-parkinsonian rat model showed a fast wash-out of the tracer, and no specific uptake in the brain, thus implying an inability to penetrate the BBB.     

Electropolymerization of PANI coating in nitric acid for corrosion protection of 430 SS

A smooth and adherent polyaniline (PANI) coating was electropolymerized in HNO₃ solution by cyclic voltammetry in order to protect the ferritic and economic 430 stainless steel (SS) from corrosion. The corrosion resistance was evaluated in 3.5 wt.% NaCl solution by anodic polarization, potentiodynamic polarization, and electrochemical impedance spectroscopy. The PANI coating shifts the corrosion potential of SS to the passive region and provides a strong and steady corrosion resistance. A low growth rate leads to a compact PANI coating that acts as a good physical barrier. However, the strong corrosion inhibition is mainly attributed to the dense oxide layers formed by the catalytic effect of PANI at the polymer/metal interface. The composition of the oxide layers was analyzed via depth profiling using X-ray photoelectron spectroscopy alternating with sputtering. Compared with layers formed on uncoated SS, the iron and chromium oxide layers under the PANI are thinner and denser, absorbing less oxygen, and providing a stronger corrosion inhibition.     

Characterization of coating systems by scanning acoustic microscopy: Debonding,blistering and surface topology

Scanning acoustic microscopy (SAM) has been applied to different commercial coating systems on steel substrates in order to evaluate the potential of the method for fast non-destructive testing during material development: the focus was on defect detection after and during accelerated weathering and corrosion tests. The possibility of detecting hidden defects (e.g., blisters) in an early stage of weathering or corrosion tests has been evaluated for different commercial coating systems. Using different scanning modes 2K polyurethane systems (solvent- and water-borne) have been examined by SAM. Debonding at the polymer/substrate interface and the interface between base coat and top coat has been studied in samples after simulated weathering. The time dependence of “blister nucleation and growth” has been studied during a salt spray test. Furthermore, the surface topography has been investigated for UV-cured acrylic systems with and without antioxidants after simulated weathering.     

Polymer:Fullerene Bimolecular Crystals for Near‐Infrared Spectroscopic Photodetectors

Spectroscopic photodetection is a powerful tool in disciplines such as medical diagnosis, industrial process monitoring, or agriculture. However, its application in novel fields, including wearable and biointegrated electronics, is hampered by the use of bulky dispersive optics. Here, solution‐processed organic donor–acceptor blends are employed in a resonant optical cavity device architecture for wavelength‐tunable photodetection. While conventional photodetectors respond to above‐gap excitation, the cavity device exploits weak subgap absorption of intermolecular charge‐transfer states of the intercalating poly[2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] (PBTTT):[6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) bimolecular crystal. This enables a highly wavelength selective, near‐infrared photoresponse with a spectral resolution down to 14 nm, as well as dark currents and detectivities comparable with commercial inorganic photodetectors. Based on this concept, a miniaturized spectrophotometer, comprising an array of narrowband cavity photodetectors, is fabricated by using a blade‐coated PBTTT:PCBM thin film with a thickness gradient. As an application example, a measurement of the transmittance spectrum of water by this device is demonstrated.     

Fair scheduling of bag-of-tasks applications using distributed Lagrangian optimization

Large scale distributed systems typically comprise hundreds to millions of entities (applications, users, companies, universities) that have only a partial view of resources (computers, communication links). How to fairly and efficiently share such resources between entities in a distributed way has thus become a critical question.