Urban spatial pattern as self-organizing system: An empirical evaluation of firm location decisions in Cleveland–Akron PMSA,Ohio

Economic models of urban spatial patterns have largely ignored complexity as an attribute of urban systems. Complexity theorists on the other hand have not made sufficiently serious and sustained attempts to verify empirically the relevance of complex systems models for urban spatial patterns. This research bridges this gap by simulating the evolution of an urban employment pattern as a self-organizing complex system and seeking its empirical validation. It estimates the model’s parameters by using firm data aggregated to the level of municipalities in Cleveland-Akron Consolidated Metropolitan Statistical Area in Ohio. The interaction among four parameters, forces of attraction and dispersion and their respective rates of dissipation with distance, are modeled as a two-dimensional complex system. The research compares the states of the modeled system with empirical data to present viable methods for verification, calibration and validation of such models.

---

     

Thermal spray vitrification process for the removal of lead-based paint from steel structures: An applications note

Lead-based paints and primers have long been used to protect steel structures from corrosion, but are now recognized as environmental hazards. During lead-based paint removal via abrasive blasting, federal, state and local environmental requirements mandate the use of containment structures to prevent contamination of air, soil, or water. The thermal spray vitrification (TSV) process was developed and optimized in laboratory experiments to remove hazardous lead-based paint. TSV consists of thermal spraying a molten glass onto the painted surface. As the glass strikes the substrate, it reacts with the paint, and organic components are pyrolyzed, while lead ions are trapped on the glass surface. Quenching stresses in the glass cause it to crack and spall off the substrate. The resulting glass fragments are collected, and further remelted to completely immobilize lead (Pb) ions in the glassy iron (Fe) silicate matrix. The glass waste is thus rendered non-hazardous, as determined by the Toxicity Characteristic Leaching Procedure (TCLP). The TSV process was field tested on a fire hydrant, using minimal personal protective equipment and without using a containment structure. The lead-containing paint was removed, without producing hazardous waste, leaving de-painted surfaces suitable for repainting.     

Dynamic effects during sinter forging of axi-symmetric hollow disc preforms

The present paper reports an investigation on the dynamic effects during sinter forging of axi-symmetric hollow disc preforms at room temperature. The preforms have been prepared by compacting the copper metal powder within the closed-cavity circular compaction dies and experiments have been conducted on computer-controlled hydraulic press to investigate the effect of die velocity, i.e. dynamic effects on various deformation characteristics, e.g. flow of material, densification during dry and lubricated interfacial friction conditions, bulging and strains at preform-free surfaces and die loads. The theoretical analysis for die pressure distribution, average die load and bulged profile by ‘upper bound’ approach has been presented. The identification of critical sinter-forging characteristics and their interrelationships are the cornerstones of present study. The effect of die velocity along with other deformation characteristics on die load and inertia energy dissipation has been investigated critically using ‘design of experiment’ technique and the important interactions have been displayed graphically using ‘response surface methodology’ technique. The study on dynamic effects revealed that die velocity is the most critical factor during sinter-forging operations, especially at higher die speeds and hence, inertia energy must be considered during its analysis. The experimental and theoretical results have been found in close agreement with each other and it is expected that the work will be highly useful for the assessment of various deformation characteristics during processing of sintered materials.     

GAS-PHASE CONTROLLED MASS TRANSFER IN A FOAM-BED REACTOR

Gas-phase controlled absorption of ammonia in foams made of solutions of sulphuric acid has been studied experimentally. Effects of gas-phase concentration of ammonia and type of surfactant on the performance of the foam-bed reactor are investigated. Gas-phase controlled absorption from a spherical bubble is anaylzed using the asymptotic value of Sherwood number (Sh = 6·58), for both negligible as well as significant changes in the volume of the bubble. The experimental data are shown to be in good agreement with the single-stage model of the foam-bed reactor using these asymptotic sub-models, as well as the diffusion-in-sphere analysis available in literature. Influence of effective diffusivity on the time dependence of fractional gas absorption has been found to be unimportant for foam columns with large times of contact. The asymptotic sub-models have been compared and use of the rigid-sphere asymptotic sub-model is recommended for foam columns of practical relevence.     

Lamellar boundary alignment of DS-processed TiAl−W alloys by a solidification procedure

In this study, a β solidification procedure was used to align the lamellae in a Ti-47Al-2W (at.%) alloy parallel to the growth direction. The Bridgman technique and the floating zone process were used for directional solidification. The mechanical properties of the directionally solidified alloy were evaluated in tension at room temperature and at 800°C. At a growth rate of 30 mm/h (with the floating zone approach), the lamellae were well aligned parallel to the growth direction. The aligned lamellae yielded excellent room temperature tensile ductility. The tensile yield strength at 800°C was similar to that at room temperature. The orientation of the γ lamellar laths in the directionally solidified ingots, which were manufactured by means of a floating zone process, was identified with the aid of electron backscattered diffraction analysis. On the basis of this analysis, the preferred growth direction of the bcc-β dendrites that formed at high temperatures close to the melting point was inferred to be [001]_β at a growth rate of 30 mm/h and [111]_β at a growth rate of 90 mm/h.     

Comparative wear performance of titanium based coatings for automotive applications using exhaust gas recirculation

This paper reports tribological characterization of titanium based coatings ion bonded on steel balls for automotive applications using exhaust gas recirculation (EGR). It is well known that lubricating oil drawn from EGR operated engine is contaminated with soot and higher amounts of wear debris compared to non-EGR operated engine. In this study, steel balls coated with TiN, TiAlN and TiCN are investigated in both fresh lubricating oil and EGR stressed oil for a comparative assessment of their wear characteristics in two mediums. Normal load was applied on the samples, tested against a rotating cast iron disk, simulating ring-liner interaction. In each experiment, about one quarter of disk was dipped in the oil (a) to ensure the presence of a thin oil film on the disk-ball interface during the experiment, and (b) to avoid exposure of the worn surface to atmospheric air. The results reveal that the wear rates of the coatings based on the change in the scar diameters of the samples, tested in EGR oil was 2-4 times higher than that of fresh lubricating oil. It was found that despite lowest hardness, TiN coated samples showed smaller scar diameters than TiAlN and TiCN coated samples in both lubricating oil environments. A simple geometric model was used to calculate the thickness of the coating removed as a function of the test duration. Results show that TiN coatings last for 120 min in fresh oil as compared to 30 min in the EGR oil under normal loading, whereas TiAlN and TiCN coating last for 60 and 30 min respectively in fresh oil and wear out in 15 min in EGR oil.     

An expert enhanced coloured fuzzy Petri net approach to reconfigurable manufacturing systems involving information delays

In today’s competitive market, manufacturers need to quickly adapt to the changing demands of the customers. Reconfigurable manufacturing system (RMS) is a cost-effective system that can easily absorb frequent changes in product demands. In this article such a system is modelled using expert enhanced coloured fuzzy Petri net (EECFPN), which considers the demands of customers as a fuzzy parameter and vividly captures the reconfigurability aspect of RMS. A fuzzy control strategy (FCS) is proposed to deal with the information delays occurring during information transfer or decision implementation. After intensive computational experimentation, it has been found that FCS outperforms the alternative priority (AP) heuristic and it is considered an effective measure to deal with situations where considerable information delay is involved.     

Globally linearized control on diabatic continuous stirred tank reactor: a case study

This paper focuses on the promise of globally linearized control (GLC) structure in the realm of strongly nonlinear reactor system control. The proposed nonlinear control strategy is comprised of: (i) an input-output linearizing state feedback law (transformer), (ii) a state observer, and (iii) an external linear controller. The synthesis of discrete-time GLC controller for single-input single-output diabatic continuous stirred tank reactor (DCSTR) has been studied first, followed by the synthesis of feedforward/feedback controller for the same reactor having dead time in process as well as in disturbance. Subsequently, the multivariable GLC structure has been designed and then applied on multi-input multi-output DCSTR system. The simulation study shows high quality performance of the derived nonlinear controllers. The better-performed GLC in conjunction with reduced-order observer has been compared with the conventional proportional integral controller on the example reactor and superior performance has been achieved by the proposed GLC control scheme.     

Correction to: Comparative analysis of limit equilibrium and numerical methods for prediction of a landslide

Bulletin of Engineering Geology and the Environment - Landslides that occur due to the rapid motion of a rock-mass are a primary risk in mountainous terrains and are a danger to human life and...