A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

A multiplexer with coupled quarter wave distributed lines in highdielectric ceramics

A multiplexers available several purposes such as for mobile communications, CATV systems and multimedia systems in future, are propped and trially made by authors. This paper present the results the design concept and experimental results. The design principle was based on the theoretical concept proposed by us     

A clinical study of respiratory infection isolating non-pathogenic Neisseria by transtracheal aspiration]

Neisseria species other than N. meningitidis and N. gonorrhoeae are generally regarded as commensal bacterial flora of the oropharynx, and little is known regarding cases of these non-pathogenic Neisseria species in the lower respiratory tract. We clinically examined respiratory tract infections from which non-pathogenic Neisseria species were isolated by transtracheal aspiration (TTA). The incidence of non-pathogenic Neisseria isolated was 54 (15.7%) out of 344 episodes of respiratory tract infections with isolated microorganisms from TTA, and was 17.6%, 15.8%, 14.3% for pneumonia, acute bronchitis, and chronic lower respiratory tract infection, respectively. All 54 episodes were isolated with other microorganisms such as alpha-Streptococcus spp. (75.9%), Haemophilus influenzae (25.9%) and anaerobics (22.2%). The isolation ratio according to the age group increased at 45 years of age or more, but did not increase with the advance of age. Predisposing factors were identified such as overt aspiration, iatrogenic procedure and heavy smoking. Cases without overt aspiration that had fevers of 38 degrees C or more or hypoxemia of less than PaO2 70 torr when detecting non-pathogenic Neisseria were observed more frequently in the aged than the non-aged. The findings suggest the detection of non-pathogenic Neisseria by TTA is influenced by the host state that the fall of microorganisms from the upper to lower respiratory tract cannot be defended or excluded by mucociliary transportation disorder due to underlying disease and smoking, or deterioration of physical status other than overt or silent aspiration.     

Transformation and fragmentation behavior of molten metal drop in sodium pool

In order to clarify the fragmentation mechanism of a metallic alloy (U–Pu–Zr) fuel on liquid phase formed by metallurgical reactions (liquefaction temperature = 650 °C), which is important in evaluating the sequence of core disruptive accidents for metallic fuel fast reactors, a series of experiments was carried out using molten aluminum (melting point = 660 °C) and sodium mainly under the condition that the boiling of sodium does not occur. When the instantaneous contact interface temperature (T_i) between molten aluminum drop and sodium is lower than the boiling point of sodium (T_c,bp), the molten aluminum drop can be fragmented and the mass median diameter (D_m) of aluminum fragments becomes small with increasing T_i. When T_i is roughly equivalent to or higher than T_c,bp, the fragmentation of aluminum drop is promoted by thermal interaction caused by the boiling of sodium on the surface of the drop. Furthermore, even under the condition that the boiling of sodium does not occur and the solid crust is formed on the surface of the drop, it is confirmed from an analytical evaluation that the thermal fragmentation of molten aluminum drop with solid crust has a potential to be caused by the transient pressurization within the melt confined by the crust. These results indicate the possibility that the metallic alloy fuel on liquid phase formed by the metallurgical reactions can be fragmented without occurring the boiling of sodium on the surface of the melt.     

New theoretical concept of thin electromagnetic wave absorber usingresonant and scattering effect of dielectric and magnetic materials

Thin electromagnetic absorber such as less than 2~3 mm will be required for wireless LAN for domestic and business use together with millimeter wave broadcasting in the future. To make a thin construction, many resonators with lossy material were used. This paper present theoretical results that are useful for absorber designs     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

A comparison of the grade of laryngeal visualisation;--the McCoy compared with the Macintosh and the Miller blade in adults

Effectiveness in visualization of the vocal cord during orotracheal intubation with McCoy (McC) compared with Macintosh (Min) and Miller (Mil) blades were investigated. After an institutional review board approval, 117 patients for elective surgery under general anesthesia requiring tracheal intubation were investigated. Five board certified anesthesiologists tried to visualize the vocal cord of a patient three times with the three different types of laryngoscope. Total of 351 intubation attempts were studied. The view obtained at laryngoscopy with each of the three blades was recorded as follows. Grade 1. If most of the glottis is visible. Grade 2. If only the posterior extremity of the glottis is visible. Grade 3. If no part of the glottis can be seen. Grade 4. If not even the epiglottis can be exposed. Eight-two Grade 1 views were obtained with McC, 72 with Mil and 47 with Min, respectively. Thirty-three Grade 2 views were obtained with McC, 36 with Min and 24 with Mil. Two Grade 3 views with McC, 34 with Min and 14 with Mil were obtained. Seven Grade 4 views were obtained with Mil. The grades of laryngeal visualization with McC were significantly lower than those with Min and Mil.