The effects of heat loss on the burning velocity of cellular premixed flames generated by hydrodynamic and diffusive-thermal instabilities

The effects of heat loss on the burning velocity of cellular premixed flames are investigated by two-dimensional unsteady calculations of reactive flows based on the compressible Navier-Stokes equation and on the diffusive-thermal model equation. Hydrodynamic and diffusive-thermal instabilities are taken into account as contributing to the intrinsic instability of premixed flames. A sufficiently small disturbance is superimposed on a planar flame to obtain the relation between the growth rate and the wavenumber, i.e., the dispersion relation. As the heat loss becomes larger, the growth rate decreases and the unstable range narrows. This is because hydrodynamic instability caused by thermal expansion weakens for nonadiabatic flames. To investigate the characteristics of cellular flames, the disturbance with the linearly most unstable wavenumber, i.e., the critical wavenumber, is superimposed. As the superimposed disturbance evolves, the cellular-flame front forms due to the intrinsic instability. The lateral movement of cellular flames is observed at low Lewis numbers, and the behavior of cellular-flame fronts becomes more unstable for nonadiabatic flames. As the heat-loss parameter increases, the burning velocity of a cellular flame normalized by that of a planar flame increases at Lewis numbers lower than unity. By contrast, when the Lewis number is not less than unity, the burning-velocity increment decreases by increasing the heat loss. Diffusive-thermal instability thus has a pronounced influence on the unstable behavior and burning velocity of nonadiabatic cellular flames.     

PIV measurement and turbulence scale in turbulent combustion

We have investigated turbulent combustion by PIV (Particle Image Velocimetry) technique. Comparing with LDV data, the validity of PIV measurements has been confirmed. Particularly, the conditions of sampling number and spatial resolution have been shown to yield reliable data using PIV. Based on the velocity fields in cold flow and combustion, the interaction between flame and flow has been discussed. It was observed that the flow field is changed by combustion and the turbulence is reduced. In order to determine statistical quantities such as mean velocity and RMS of velocity fluctuation, a sampling number of 1000 is needed. Moreover, the velocity correlation coefficient was evaluated to obtain the integral length scale of the flow. For both cold flow and combustion, the PIV estimated scale is very close to that of LDV based on the assumption of Taylor's hypothesis. As a result, the spatial resolution in this study is about 6 times smaller than the integral length scale. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(7): 501–512, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20129     

Surface activity of the lipid products hydrolyzed with lipase and phospholipase A-2

We examined thein vitro surface activity, immersional wettability and adhesional wettability shown by aqueous solutions of soy lysophospholipid (SLP)/monoglyceride (MG)/fatty acid (FA), SLP/FA and SLP/MG, and found that many lipid mixtures showed significant surface activity when their MG and FA components consisted of polyunsaturated FA and/or medium chain FA. The more unsaturated the FA, the higher the surface activity. A mixture of SLP/medium chain fatty acid MG (medium chain MG)/medium chain FA showed the highest surface activity, and was comparable to an Aerosol-OT surfactant, the most effective wetting agent. SLP/polyunsaturated FA monoglyceride (polyunsaturated MG)/polyunsaturated FA, SLP/medium chain FA, and SLP/polyunsaturated FA, SLP/medium chain MG, and SLP/polyunsaturated MG also showed a high degree of activity. Wettability decreased rapidly when the amount of saturated, long chain FA moieties increased. It is recognized that the degrees of unsaturation and the chain length of FAs in the lipid mixtures have a decisive influence on surface activities. Higher ratios of MG and FA to SLP gave higher activity; and solubilizers such as bile salts were necessary to dissolve them in water.     

Stabilizing effect of the cyclodextrins additive to spray-dried particles of curcumin/polyvinylpyrrolidone on the supersaturated state of curcumin

Although curcumin is considered to have various therapeutic effects, its use as a functional food or supplement is restricted owing to its low water solubility and bioavailability. To increase the solubility of curcumin in water, the use of polyvinylpyrrolidone (PVP) and vinylpyrrolidone-vinyl acetate copolymers with a pyrrolidone skeleton was noted to be promising. In particular, the bi-component formulations of curcumin/PVP prepared through spray drying exhibited an amorphous state in powder X-ray diffraction observations and temporally increased the apparent solubility of curcumin to over 5000 times that of untreated curcumin; nevertheless, after 24 h, the solubility decreased owing to the unstable supersaturated state of curcumin. The addition of α-cyclodextrin (α-CyD) in the bi-component curcumin/PVP formulation helped maintain the supersaturated state of curcumin, whereas the addition of β- and γ-CyD led to the collapse of the supersaturated state. The addition of α-CyD can likely help inhibit the nucleation and crystal growth of curcumin, through the interaction among the solubilized units of curcumin/PVP and α-CyD.     

Preparation of microporous polypropylene sheets containing CaCO3 filler: Effect of draft ratio

Microporous polypropylene sheets were prepared as follows. First, polypropylene pellet-containing CaCO₃ filler was extruded to prepare base sheets, which were then biaxially stretched. The draft effect at the extrusion process was studied in relation to some properties of the resultant microporous polypropylene sheets. © 1996 John Wiley & Sons, Inc.     

Microporous polypropylene fibers containing poly(methylsilsesquioxane) filler

Microporous polypropylene fibers were prepared by stretching polypropylene fibers containing poly(methylsilsesquioxane) filler. The properties of the resultant fibers are controllable by adjusting the filler content and stretching degree. The resultant fibers have a fine texture of polypropylene fibrils, in which the filler particles are dispersed. Some properties were investigated: tensile strength, elongation, Young's modulus, porosity, pore size, and specific surface area. © 1996 John Wiley & Sons, Inc.     

Microorganisms in landfill bioreactors for accelerated stabilization of solid wastes

Landfill bioreactors (LBRs) with management of leachate and biogas have presented numerous advantages such as accelerated stabilization of solid wastes, reduced amount of leachate, and in situ leachate treatment. Such advantages have minimized environmental risks, have allowed extension of the useful life of the landfill site, and have fostered cost reduction. LBRs of three types have been developed using both anaerobic and aerobic modes: anaerobic, aerobic, and hybrid. Microorganisms in landfills cause various reactions related with organic fractions and heavy metals. Such functions have been stimulated in LBRs by recirculation of leachate with or without aeration. To date, most studies of microorganisms in LBRs have analyzed bacteria and archaea based on 16S rRNA genes and have analyzed fungi based on 18S rRNA genes from a taxonomical viewpoint. Indicator genes for specific functions in LBRs such as nitrification, denitrification, and methane production have also been monitored. The population dynamics of microorganisms in LBRs have been partially clarified, but the obtained data remain limited because of highly heterogeneous features of solid wastes inside LBRs. Systematic monitoring of microorganisms should be established to improve LBR performance.     

Structural hierarchy developed in injection molding of nylon 6/clay/carbon black nanocomposites

The influence of platelet-type clay nanoparticle (nanoplatelet) on the structural evolution in injection-molded nylon 6)/carbon composites was investigated. In the absence of nanoplatelets, the nylon 6/CB systems were found to exhibit unoriented structure with nylon 6 crystalline regions exhibiting exclusively α crystal form throughout the thickness of the samples. However, inclusion of nanoplatelets induces substantial local orientation of the nylon 6 chains in the molded parts in all processing conditions and compositions. In these clay/nylon 6/CB ternary nano systems, nylon 6 matrix was found to be exclusively in γ crystal form at the skin regions and α crystal form fraction increases towards the core of the molded parts as a result of decrease in cooling rate with depth during the solidification stage. Two nanoplatelet orientation behaviors were identified: (i) in the absence of irregular shaped CB, the nanoplatelets align parallel with one another following the local flow patterns. The latter behavior also causes enhanced orientation of the nylon 6 chains undergoing substantial shear amplification trapped in between the nanoplatelets (ii) in the CB-enriched regions, nanoplatelets though still remaining parallel to one another, are randomized by following the local contours of irregular shaped CB aggregates. These CB aggregates themselves were found to organize to form trains in larger scale as a result of flow alignment.     

Study of crater formation and sputtering process with large gas cluster impact by molecular dynamics simulations

Molecular dynamics (MD) simulations of large argon clusters impacting on silicon solid targets were performed in order to study the transient process of crater formation and sputtering. The MD simulations demonstrate that the initial momentum of incident cluster is transferred to target surface atoms through multiple collision mechanism, where the initial momentum, which is along to the surface normal before impact, is deflected to lateral direction. This momentum transfer process was analyzed by the calculation of the velocity at the crater edge (the interface between cluster and target). In the case of Ar₁₀₀₀ cluster impact on Si(1 0 0) target at low energy per atom less than 40 eV/atom, the maximum value of lateral velocity of the crater edge increases in proportional to the velocity of incident cluster atoms. On the other hand, the crater edge velocity saturates over 40 eV/atom of incident energy per atom. In this case, the whole of constituent cluster atoms are implanted into the target and expand in both lateral and reflective directions at the subsurface region of the target. These MD simulations demonstrated that this collisional process result in the high yield sputtering of the target atoms.     

Applications of microstructures fabricated by proton beam writing to electric-micro filters

Fabrication of high-aspect-ratio microstructures was performed by proton beam writing (PBW) using a microbeam line at Takasaki Ion Accelerators for Advanced Radiation Application (TIARA), JAEA Takasaki, JAPAN. As one of the applications of the high-aspect-ratio structures micro-machined by PBW, we utilized the high-aspect pillars for electric-micro filters of microbes such as Escherichia coli and Yeast based on the dielectrophoretic force. The filter is equipped with high-aspect pillars with a height of ～20 μm and a diameter of ～1 μm on a glass plate. Evaluation of the dielectrophoresis (DEP) device for capturing E. coli and Yeast was made using either observation by optical microscope or photoluminescence (PL) measurements.