Quantitation of Sulfacetamide, Sulfadiazine, Sulfamerazine and Sulfame Thazine in Various Cominations Dsing High-Performance Liquid Chromatography

A reverse phase high-performance liquid chromatography method for the quantitation of sulfacetamide, sulfadiazine, sulfamerazine, and sulfamethazine in various combinations has been developed. The method is simple, accurate, precise and reproducible. The percent relative standard deviations based on 6 injections were 2.1, 0.6, 1.9, and 1.6 for sulfacetamide, sulfadiazine, sulfamerazine, and sulfamethazine, respectively. The ratio of peak heights (drug/internal standard) wer closely related (r value 0.99 or better) to concentrations (± 20% of the standard solution concentrations). The results of synthetic mixtures showed quantitative recovery and method was successfully applied to commercial dosage forms (tablets and suspension). Extraction of sulfa drugs from the dosage forms required a very simple procedure.     

CARD: A Contact-based Architecture for Resource Discovery in Wireless Ad Hoc Networks

Traditional protocols for routing in ad hoc networks attempt to obtain optimal or shortest paths, and in doing so may incur significant route discovery overhead. Such approaches may be appropriate for routing long-lived transfers where the initial cost of route discovery may be amortized over the life of the connection. For short-lived connections, however, such as resource discovery and small transfers, traditional shortest path approaches may be quite inefficient. In this paper we propose a novel architecture, CARD, for resource discovery in large-scale wireless ad hoc networks. Our mechanism is suitable for resource discovery as well as routing very small data transfers or transactions in which the cost of data transfer is much smaller than the cost of route discovery. Our architecture avoids expensive mechanisms such as global flooding and complex hierarchy formation and does not require any location information. In CARD resources within the vicinity of a node, up to a limited number of hops, are discovered using a proactive scheme. For resources beyond the vicinity, each node maintains a few distant nodes called contacts. Contacts help in creating a small world in the network and provide an efficient way to query for distant resources. Using contacts, the network view (or reachability) of the nodes increases, reducing the discovery overhead and increasing the success rate. On the other hand, increasing the number of contacts also increases control overhead. We study such trade-off in depth and present mechanisms for contact selection and maintenance that attempt to increase reachability with reduced overhead. Our schemes adapt gracefully to network dynamics and mobility using soft-state periodic mechanisms to validate and recover paths to contacts. Our simulation results show that CARD is scalable and can be configured to provide desirable performance for various network sizes. Comparisons with other schemes show overhead savings reaching over 93% (vs. flooding) and 80% (vs. bordercasting or zone routing) for high query rates in large-scale networks.     

Proton exchange membranes by radiation grafting of styrene onto fep films. III. Structural investigation

Structural investigation on proton-exchange membranes, obtained by the radiation grafting of styrene onto FEP films and subsequent sulfonation, was carried out by differential scanning calorimetry. The membrane crystallinity was found to show a decreasing trend with increasing degree of grafting. The melting temperature of all the membranes also showed a slight decrease as compared to the ungrafted FEP. The results have been explained in terms of the cumulative effect of the decrease in the crystalline/amorphous ratio by the incorporation of amorphous polystyrene grafts and of disruption of spherulitic crystallites of the FEP component in the membranes. The glass transition temperature of the membranes with different water contents was also evaluated. A correlation of the glass transition temperature with the residual water in dried membranes was established. © 1994 John Wiley & Sons, Inc.     

Satellite broadcasting of time and frequency signals

The authors discuss the advantages of broadcasting time from a satellite over the more traditional ground based methods such as short wave and low frequency standard time and frequency broadcasts. The authors describe several one way satellite time services currently operational and discuss, in particular, a broadcast service using the Indian domestic satellite INSAT. The signal format, transmitting and receiving setups, and the methods for satellite position prediction are described in detail for the INSAT broadcast. Some typical results of time and frequency calibration are also discussed     

The generalized Kuhn model of linear viscoelasticity

We propose a generalization of the Kuhn model of linear viscoelasticity. This generalization, which has four material parameters, is able to provide a near frequency independent response over a wide range of frequencies. It is useful for highly dissipative materials such as asphalt concrete. It is derived by generalizing Lubliner and Panoskaltsis’s modified Kuhn model, but we also show that it is closely related to fractional derivative models. We show that the model admits a rheological approximation, that is, an approximation by classical springs and dashpots. The model and rheological representation are compared to experimental data.     

A parametric study of strength reduction factors for elasto-plastic oscillators

Strength reduction factors (SRFs) continue to play a key role in obtaining design forces from elastic design spectra (via response modification factors) in ductility-based earthquake-resistant design. Despite several years of sustained research efforts, it has not been conclusively shown how SRF for a given singledegree-of-freedom structural system depends on various source and site parameters. A parametric study is carried out here for the explicit dependence of SRF spectrum (describing variation of SRF with system period for a given ductility demand) on strong motion duration, earthquake magnitude, geological site conditions, and epicentral distance in case of (non-degrading) elasto-plastic oscillators. For this, scaled response spectra are considered for different combinations of earthquake magnitude, site conditions and epicentral distance, and SRF spectra are generated from 1274 accelerograms recorded in western USA after making those compatible with each of these spectra. It is shown that there is no clear and significant dependence of SRF spectrum on strong motion duration. Further, the parametric dependence on earthquake magnitude, site conditions, and epicentral distance broadly conforms to the trends reported by earlier investigations. In particular, this study confirms that the dependence of SRF spectra on earthquake magnitude should not be ignored. This paper has been contributed in honour of Professor R N Iyengar, Indian Institute of Science, on the occasion of his formal retirement.     

A Study of Interspeaker Variability in Speaker Verification

We propose a new approach to the problem of estimating the hyperparameters which define the interspeaker variability model in joint factor analysis. We tested the proposed estimation technique on the NIST 2006 speaker recognition evaluation data and obtained 10%-15% reductions in error rates on the core condition and the extended data condition (as measured both by equal error rates and the NIST detection cost function). We show that when a large joint factor analysis model is trained in this way and tested on the core condition, the extended data condition and the cross-channel condition, it is capable of performing at least as well as fusions of multiple systems of other types. (The comparisons are based on the best results on these tasks that have been reported in the literature.) In the case of the cross-channel condition, a factor analysis model with 300 speaker factors and 200 channel factors can achieve equal error rates of less than 3.0%. This is a substantial improvement over the best results that have previously been reported on this task.     

Design development of a static sunshade using small scale modeling technique

The rising global demand for energy has triggered emphasis on conservation of energy. Buildings are one of the important energy consuming sectors. Passive solar architecture encompasses a wide range of strategies and options resulting in energy efficient building design and increased occupant's comfort. Passive solar design, aiming at increasing direct solar gains during winter period and to avoid overheating during summer period should make use of specific shading devices over energy efficient window. The static sunshades are most effective for solar control inside the buildings.Countries like India have composite climate, which can be classified under summer, winter and rainy season. Depending on the seasonal requirements, this paper introduces a new geometry of a static sunshade, designed by calculating the sun angles for the two dates. The static sun shading design methodology is validated with the help of small scale modeling experimentation technique, carried out in Pilani, Rajasthan (India). Although insulating materials can be used as a part of a building structure, its feasibility should be checked before particular application. In the present paper, the two small-scale experimental models of actual construction material with varying static sunshades, i.e. horizontal and the proposed one have been constructed and analyzed with the models of insulating material (Polyurethane Foam [PUF]). Depending upon the solar intersection over south facade wall, sunlit area and shaded area have been correlated with temperature inside the models to decide the effectiveness of the proposed sunshade.