Corrosion inhibition of steel by sodium sulphite

The corrosion inhibition of steel in a closed system containing sodium sulphite at room temperature has been established. Steady-state potential as well as weight loss measurements indicated that sodium sulphite did not only remove O₂ from the solution but also brought complete cathodic protection. It was found also that sodium sulphite could tolerate the presence of Cl^?, SO₄^2? and S^2?. In case of sulphite—sulphate or sulphite—chloride mixtures a concentration of 5 × 10^?3M Na₂SO₃ was required to tolerate a wide range of concentration of these aggressive ions. A linear relationship was found between log sulphite concentration and log maximum tolerated concentration of sulphide.     

Comparing the Effects of Microwave and Conventional Heating Methods on the Evaporation Rate and Quality Attributes of Pomegranate (<Emphasis Type="Italic">Punica granatum</Emphasis> L.) Juice Concentrate

Pomegranate juice was concentrated by conventional heating and microwave heating at different operational pressures (12, 38.5, and 100 kPa), and their effects on evaporation rate and quality attributes of concentrated juice were investigated. The final juice concentration of 40° Brix was achieved in 140, 127, and 109 min at 100, 38.5, and 12 kPa, respectively, by using conventional heating. Applying microwave energy decreased required times to 118, 95, and 75 min. The changes in color, anthocyanin content, and antioxidant capacity during concentration processes were investigated. L*, a*, and b* parameters were measured to estimate the intensity of color loss. All Hunter color parameters decreased with time. Results showed that the degradation of color, anthocyanins, and antioxidant activity were more important in conventional heating compared to microwave heating method. Degradation rates increases by increasing process pressure. A first-order kinetics model was applied to modeling changes in total solid content, anthocyanin content, and antioxidant capacity.     

Recycling of used engine oil by different solvent

The refining of lubricating oils from waste lubricating oil was examined utilizing a novel blend of solvent extraction and activated alumina adsorbent. The activity of these solvent extraction blends {toluene, butanol and methanol (A)}, {toluene, butanol and ethanol (B)} and {toluene, butanol and isopropanol (C)} was evaluated experimentally, oil to solvent proportions from 1:1 to 1:3 were analyzed for mixture blend (C). The results confirm solvent mixture (A) gave good efficiency with the highest percent sludge removal. The maximum percent of sludge removal improves with the increase of solvent to oil ratios. The physical properties of the recycle oil were measured. The results show the change in the properties of recycling oil and have good efficiency.     

Efficient 3D point clouds classification for face detection using linear programming and data mining

Most of the applications related to security and biometric rely on skin region detection such as face detection, adult 3D objects filtering, and gesture recognition. In this paper, we propose a robust method for skin detection on 3D coloured point clouds. Then, we extend this method to solve the problem of 3D face detection. To do so, we construct a weighted graph from initial coloured 3D point clouds. Then, we present a linear programming algorithm using a predictive model based on a data mining approach to classify and label graph vertices as skin and non-skin regions. Moreover, we apply some refinement rules on skin regions to confirm the presence of a face. Furthermore, we demonstrate the robustness of our method by showing and analysing some experimental results. Finally, we show that our method deals with many data that can be represented by a weighted graph such as 2D images and 3D models.     

Synthesis and reactions of 2-(p-chloroanilino)-5- (D-galacto-1,2,3,4,5-pentahydroxypentyl)-1,3,4-thiadiazole

Oxidative cyclization of D -galactose (p-chlorophenyl)thiosemicarbazone gave 2-(p-chloroanilino)-5-( D -galacto-1,2,3,4,5-pentahydroxypentyl)-1,3,4-thiadiazole ( 1 ), whose acetylation afforded 2-[N-acetyl-N-(p-chlorophenyl)]-amino-5-( D -galacto-1,2,3,4,5-pentacetoxypentyl)- 1,3,4-thiadiazole ( 3 ). Its periodate oxidation of the glycol groups gave 2-(p-chloroanilino)-1,3,4-thiadiazole-5-carboxaldehyde ( 4 ), which can be transformed into 1,2-[2-(p-chloroanilino)-1,3,4-thiadiazol-5-yl]-1-hydroxy-2-oxoethane. A number of hydrazones of the formyl thiadiazole was prepared and its reduction with sodium borohydride gave 2-(p-chloroanilino)-5-hydroxymethyl-1,3,4-thiadiazole ( 6 ), whose acetylation gave a mono-O-acetyl derivative ( 7 ). Oxidation of the formyl thiadiazole gave 2-(p-chloroanilino)-1,3,4-thiadiazole ( 9 ). The spectral data of the compounds were discussed.     

Calculation of maximum surface settlement induced by EPB shield tunnelling and introducing most effective parameter

This study aims to predict ground surface settlement due to shallow tunneling and introduce the most affecting parameters on this phenomenon.Based on data collected from Shanghai LRT Line 2 project undertaken by TBM-EPB method,this research has considered the tunnel's geometric,strength,and operational factors as the dependent variables.At first,multiple regression(MR) method was used to propose equations based on various parameters.The results indicated the dependency of surface settlement on many parameters so that the interactions among different parameters make it impossible to use MR method as it leads to equations of poor accuracy.As such,adaptive neuro-fuzzy inference system(ANFIS),was used to evaluate its capabilities in terms of predicting surface settlement.Among generated ANFIS models,the model with all input parameters considered produced the best prediction,so as its associated R~2 in the test phase was obtained to be 0.957.The equations and models in which operational factors were taken into consideration gave better prediction results indicating larger relative effect of such factors.For sensitivity analysis of ANFIS model,cosine amplitude method(CAM) was employed; among other dependent variables,fill factor of grouting(n) and grouting pressure(P) were identified as the most affecting parameters.     

Inhibition effect of some polymers on the corrosion of cadmium in a hydrochloric acid solution

The effects of poly(vinyl alcohol) (PVA), poly(acrylic acid) (PAA), sodium polyacrylate (NaPA), poly(ethylene glycol) (PEG), pectin (P), and carboxymethyl cellulose (CMC) on the corrosion of cadmium in a 0.5M hydrochloric acid (HCl) solution were studied with both electrochemical impedance spectroscopy and Tafel plot techniques. Measurements were carried out at cathodic, open‐circuit, and anodic potentials. All the investigated polymers had inhibitory effects on both the cathodic (except for NaPA, P, and CMC) and anodic processes, with a predominant anodic inhibiting action. However, NaPA, P, and CMC exhibited a slight cathodic inhibiting action only at higher polymer concentrations. This behavior may be attributed to the very weak adsorbability of the polymers on the cathodic sites. Because PVA and PEG had hydroxy groups, there could be bridging between the polymer and the surface, resulting in an inhibiting effect in the HCl solution. However, PVA had much greater adsorbability on the surface than PEG at the anodic potential. The adsorption of most of the polymers obeyed a Temkin adsorption isotherm, and this indicated indicating that the main process of inhibition was adsorption. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 866–871, 2003     

A review of the desert gold jojoba (Simmondsia chinensis) whole plant,oil, and meal: Phytochemical composition,medicinal uses,and detoxification

Simmondsia chinensis (Link) C.K. Schneider (Jojoba) is a valuable shrub that can bear harsh conditions and is cultivated in many countries globally. Its prominence originates from the unique oil that constitutes more than 50% of the seeds. The great economic value of jojoba oil is highlighted in many fields, especially the cosmetic industry. The remaining meal, which is rich in proteins, constitutes a good source for cattle feeding. However, the presence of antinutritional principles in the meal limited its use and encouraged the researchers to find different ways for its detoxification. The detoxification ways of jojoba meal included physical, biological, and chemical treatments. The phytochemical composition of the oil was deeply studied, but for the remaining plant, only few studies have reported its chemical composition. Jojoba oil composed of wax esters (97%), fatty acids, fatty alcohols, sterols, and small percentage of vitamin E. Jojoba possesses a long traditional history. It has been used in folklore for treatment of cold, dysuria, and obesity. Many recent studies reported its medicinal and pharmacological properties like antioxidant, anti-inflammatory, antimicrobial, anticancer, anti-acne, anti-psoriasis, wound healing, and hepatoprotective activities. Many of these biological activities have been attributed to the presence of several phytochemicals such as simmondsin and phenolic compounds. In this review, the authors will highlight the previous phytochemical studies, medicinal applications of jojoba oil and different plant parts, and the various ways of meal detoxification.     

Volatiles Retention in the Drying of Skin Forming Materials PART 2: Natural Materials

ABSTRACT

The retention of ethanol as a simulated flavour was determined by drying single droplets in a horizontal wind tunnel, with fructose, reconstituted skim milk or coffee as the flavour encapaulant. Droplet temperature histories, ethanol content, and crust structure were evaluated for each encapsulant. No enhancement of volatile retention was obtained with the fructose eolutions irrespective of initial concentration, air velocity, or air temperature. Enhancement of the volatiles retention with the coffee and skim milk solutions correlated with an increase in initial solide concentration. resulting from selective diffusion phenomena and the formation of a resistant skin. In both cases air velocity had no significant effect upon volatiles retention. Skin forming materials with similar characteristics would be advantageous for flavour retention.