Stiffness of trabecular bone of the tibial plateau in patients with rheumatoid arthritis of the knee

Stiffness of subchondral proximal tibial trabecular bone is a factor in the stability of prostheses implanted into that bone. The stiffness of trabecular bone in osteoarthritis (OA) has been documented. Trabecular bone in rheumatoid arthritis (RA) is osteopenic in numerous sites and morphologically abnormal in the proximal tibia. Reliable data on proximal tibial bone in RA are lacking, although 1 study failed to identify abnormalities. The purposes of this study were (1) to document the stiffness of the proximal tibial cancellous bone in patients with RA, (2) to determine the effect of angular deformity on bone stiffness in rheumatoid patients, and (3) to compare RA stiffness values with those in published reports for OA. Fifteen tibial plateau were obtained from patients with RA during surgery. Each plateau was horizontally seated in a mold and covered with cement. The plateau was divided into 6 regions, which were used to facilitate comparison between specimens and the existing literature. Indentation tests were conducted with a 4-mm-diameter cylindrical indentor controlled by an MTS machine. The indentor descended at a rate of 2 mm/min to a maximum depth of 1.0 mm; load and displacement data were digitally recorded. Stiffness was calculated from the slope of the linear region of the curve using best-fit linear regression. Where varus deformity was present, stiffness in the medial plateau was higher overall than for the other compartment; whereas in the case of valgus deformity, stiffness of the lateral side was significantly higher (P < .05 for each observation). In comparison to older normal specimens, both the medial compartment of the varus RA specimens (P < .01) and the posterolateral compartment of the valgus RA specimens (P < .01) had significantly lower stiffness. Comparison with OA specimens showed that in varus RA, the posteromedial region had significantly lower stiffness than in varus OA at the same site (P < .01). In valgus RA, the lateral region had significantly lower stiffness than in valgus OA at the same site (P < .01). The mean stiffness ratio of the valgus RA was significantly (P < .01) altered from normal, and for the varus RA, it was significantly (P < .01) different from normal posteriorly. The stiffness ratios for the varus RA were significantly (P < .01) different from those for varus OA; there was no difference between valgus RA and valgus OA. It is concluded that RA affected bone has significantly lower stiffness than normal and osteoarthritic bone. The loaded plateau is stiffer than the unloaded plateau in angular deformity, but is still less stiff than normal bone and osteoarthritic plateaus with corresponding deformities.     

Action semantics-directed prototyping

We present a methodology for compiler synthesis based on Mosses-Watt's action semantics. Each action in action semantics notation is assigned specific “analysis functions”, such as a typing function and a binding-time function. When a language is given an action semantics, the typing and binding-time functions for the individual actions compose into typing and binding-time analyses for the language; these are implemented as the type checker and static semantics processor, respectively, in the synthesized compiler. Other analyses can be similarly formalized and implemented. We show a sample language semantics and its synthesized compiler, and we describe the compiler synthesizer that we have developed.     

Hemodynamic characteristics, myocardial kinetics and microvascular rheology of FS-069, a second-generation echocardiographic contrast agent capable of producing myocardial opacification from a venous injection

OBJECTIVES: We sought to 1) study the effects of FS-069 on cardiac and systemic hemodynamic function, myocardial blood flow, left ventricular wall thickening and pulmonary gas exchange when injected intravenously; and 2) compare the myocardial kinetics and microvascular rheology of FS-069 and Albunex when injected directly into a coronary artery. BACKGROUND: FS-069 is a second-generation echocardiographic contrast agent composed of perfluoropropane-filled albumin microspheres; it is capable of consistent and reproducible myocardial opacification from a venous injection. METHODS: Nine dogs were used to study the effects of FS-069 on hemodynamic function, pulmonary gas exchange, left ventricular wall thickening and myocardial blood flow and to characterize its myocardial kinetics when injected intravenously. These dogs were also used to compare the myocardial kinetics of FS-069 with those of Albunex during intracoronary injections. Nine Sprague-Dawley rats were used to compare the microvascular rheology of these two contrast agents, and in vitro modeling was performed to assess whether the microvascular findings of FS-069 can explain its echocardiographic behavior during direct coronary injections. RESULTS: There were no effects of 30 rapid venous injections of FS-069 (every 20 s) on cardiac output; mean aortic, pulmonary or left atrial pressures; and peak positive and negative first derivative of left ventricular pressure (dP/dt). Similarly, there were no effects of this agent on radiolabeled microsphere-measured regional myocardial blood flow, left ventricular wall thickening or pulmonary gas exchange. When injected intravenously, the myocardial transit of this agent resembled a gamma-variate form. When diluted FS-069 was injected directly into the coronary artery; however, its transit resembled the integral of gamma-variate function, with persistent myocardial opacification lasting several minutes, which was different from that of Albunex. Intravital microscopy revealed that, unlike Albunex, when no bubbles are entrapped within the microcirculation after an arterial injection, a very small fraction of the diluted, larger FS-069 microbubbles are entrapped. In vitro modeling confirmed that this small fraction of microbubbles can result in persistent myocardial opacification. CONCLUSIONS: FS-069 produces no changes in hemodynamic function, myocardial blood flow, left ventricular wall thickening or pulmonary gas exchange when injected intravenously in large amounts. When diluted FS-069 is injected into the coronary artery, a very small fraction of the larger bubbles are entrapped within the microcirculation, resulting in a persistent contrast effect. Thus, although FS-069 is a safe intravenous echocardiographic contrast agent, it cannot provide information on myocardial blood flow when injected directly into a coronary artery.     

Processing to optimize the strength of heavily drawn Cu-Nb alloys

Heavily drawn Cu-Nb alloys display quite high ultimate tensile strengths. A modification to the consumable arc-casting technique used to prepare these alloys is shown to decrease the as-cast niobium dendrite diameter,t ₀, and also increase strength. Evaluation of strength, niobium filament spacing and thickness data show that strength varies with as-cast niobium dendrite size as somewhere betweent _o ^–0.36 tot _o ^–0.50 . Splat-cooling techniques demonstrate that minimum niobium dendrite sizes as small as 0.22m are possible. These sizes are over a factor of 10 smaller than has been achieved by consumable arc casting, and it is therefore suggested that processing rapidly solidified powders of Cu-Nb alloys should have significant advantages for preparing high-strength heavily drawn Cu-Nb alloys.     

Polycyclic Aromatic Hydrocarbons Activate the Aryl Hydrocarbon Receptor and the Constitutive Androstane Receptor to Regulate Xenobiotic Metabolism in Human Liver Cells

Polycyclic aromatic hydrocarbons (PAHs) are environmental pollutants produced by incomplete combustion of organic matter. They induce their own metabolism by upregulating xenobiotic-metabolizing enzymes such as cytochrome P450 monooxygenase 1A1 (CYP1A1) by activating the aryl hydrocarbon receptor (AHR). However, previous studies showed that individual PAHs may also interact with the constitutive androstane receptor (CAR). Here, we studied ten PAHs, different in carcinogenicity classification, for their potential to activate AHR- and CAR-dependent luciferase reporter genes in human liver cells. The majority of investigated PAHs activated AHR, while non-carcinogenic PAHs tended to activate CAR. We further characterized gene expression, protein abundancies and activities of the AHR targets CYP1A1 and 1A2, and the CAR target CYP2B6 in human HepaRG hepatoma cells. Enzyme induction patterns strongly resembled the profiles obtained at the receptor level, with AHR-activating PAHs inducing CYP1A1/1A2 and CAR-activating PAHs inducing CYP2B6. In summary, this study provides evidence that beside well-known activation of AHR, some PAHs also activate CAR, followed by subsequent expression of respective target genes. Furthermore, we found that an increased PAH ring number is associated with AHR activation as well as the induction of DNA double-strand breaks, whereas smaller PAHs activated CAR but showed no DNA-damaging potential.     

Sulfur in chromia

The solubility of sulfur in chromia has been studied in H₂-H₂O-H₂S tagged with³⁵S at 973 and 1173 K at low oxygen and sulfur partial pressures typical for coal gasification-systems. For monocrystalline samples, it has been shown that sulfur-containing species are only present adsorbed on the surface of the specimens and can be removed by ultrasonic cleaning in acetone. The surface coverage after 4 weeks of exposure to H₂-H₂O-H₂S was between 2.8 and 19.3% of a monolayer. In polycrystalline chromia, sulfur was located only in pores and cracks of the sample. In dense, compact areas of the specimens the solubility of sulfur was below the detection limit of autoradiography, which was estimated to be better than 0.17 ppm.     

Silicon Nitride Derived from an Organometallic Polymeric Precursor: Preparation and Characterization

Partially crystalline Si₃N₄, with nanosized crystals and a specific surface area greater than 200 m²/g, is obtained by pyrolysis of a commercially available vinylic polysilane in a stream of anhydrous NH₃ to 1000°C. This polymer does not contain N initially. Crystallization to high-purity α-Si₃N₄ proceeds with additional heating above 1400°C under N₂. The changes in crystallinity, powder morphology, infrared spectra, and elemental compositions, for samples annealed from 1000° to 1600°C under N₂, are consistent with an amorphous-to-crystalline transformation. Although macroscopic consolidation and local densification occur at 1400°C, volatilization and accompanying weight loss limit bulk densification. The effect of temperature on specific surface area is examined and related to the sintering process. These results are applicable to pyrolysis, decomposition, and crystallization studies of ceramics synthesized by polymeric precursor routes.     

Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing

Prior research suggests that ergonomics work design and mixed teams (in age and gender) may compensate declines in certain abilities of ageing employees. This study investigates simultaneous effects of both team level factors on absenteeism and performance (error rates) over one year in a sample of 56 car assembly teams (N = 623). Results show that age was related to prolonged absenteeism and more mistakes in work planning, but not to overall performance. In comparison, high-physical workload was strongly associated with longer absenteeism and increased error rates. Furthermore, controlling for physical workload, age diversity was related to shorter absenteeism, and the presence of females in the team was associated with shorter absenteeism and better performance. In summary, this study suggests that both ergonomics work design and mixed team composition may compensate age-related productivity risks in manufacturing by maintaining the work ability of older employees and improving job quality.     

Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004