Characteristics of Bi-metallic Interfaces Formed During Direct Energy Deposition Additive Manufacturing Processing

Metallurgical and Materials Transactions B - Various additive manufacturing processes are being evaluated to reduce the time and cost for fabrication of low volume, complex, and multifunctional...     

TBA studies of prepreg curing behavior

The torsional braid analysis (TBA) equipment has been used as an automated torsion pendulum to characterize prepreg materials in the form of single ply strips (2-1/2 × 1/8 in.). Compared to the use of coated glass braids, the main difference was a marked weakening of the gelation mechanical damping peak in isothermal runs. However, prepreg materials consisting of epoxy resins on glass, carbon or aramid fibers were successfully run isothermally to provide gelation and vitrification times as a function of temperature, or in constant heating rate scans to reveal the T < T_g and the T_g relaxations of the uncured resins, and at higher temperatures phenomena associated with gelation, vitrification and devitrification.     

Reaction Sequence and Microstructrual Development of CeO2-Doped Reaction-Bonded Mullite

A promising technique for the fabrication of mullite ceramics and mullite-matrix composites with low dimensional changes ("near-net-shape processing") is reaction bonding using Si metal and α-Al₂O₃ as starting materials, because sintering-induced shrinkage is compensated by Si-oxidation-induced volume expansion. A mullite reaction bonding (RBM) route which proceeds at much lower temperatures (lessthan equal to1350°C) than in conventional RBM systems (greaterthan equal to1500°C) is based on Ce doping which provides accelerated Si oxidation and mullite formation due to the formation of transient, low-viscosity Ce-Al-Si-O liquids. The present study shows that the required Ce-Al-Si-O liquids form in a reducing environment with Ce occurring as Ce³⁺. In an oxidizing environment, Ce is present as Ce⁴⁺, giving rise to precipitation of crystalline CeO₂. Ce³⁺ left and right arrow Ce⁴⁺ redox reactions in the temperature range under consideration appear to be controlled by the presence of nonoxidized Si in the samples. According to the present investigation the amount of CeO₂ added to the starting powders must be tailored carefully: Exaggerated CeO₂ content produces large amounts of low-viscosity Ce-Al-Si-O liquids which may have the disadvantage of excessive sealing of the open porosity. This slows the oxygen diffusion velocity into the specimen considerably, with the consequence that nonoxidized Si and a residual Ce-Al-Si-O glass coexist in the ceramics after processing. A solution to this problem is to simultaneously enhance mullite crystal growth through seeding which works against excessive liquid-phase-induced shrinkage of the samples. This in turn enables complete oxidation and recrystallization of all liquid phases.     

实施ICRP建议的主要挑战:近期和未来的发展（英文）

自2007年国际放射防护委员会(ICRP)发布一般性建议以来,在解决将这些建议付诸实践所面临的挑战方面取得了一些进展。值得注意的是,为放射防护管理而提出三类照射情况后(即,计划照射、现存照射及应急照射),我们进一步研究了它们在几个领域的应用,如涉及天然放射性物质的工业领域以及核事故发生后的应急与恢复领域。本文着重介绍了最近一些出版物提出的以及持续开展的工作中所涉及的主要问题,重点围绕与放射防护体系伦理基础有关的研究进展、放射防护体系在管理现存照射情况中的应用以及环境放射防护与ICRP防护体系的融合。最后,本文介绍了2022年ICRP成立的与放射防护体系应用相关的新工作组的工作目标。     

Enzymatic esterification of glycerol III. Lipase-catalyzed synthesis of regioisomerically pure 1,3-sn-diacylglycerols and 1 (3)-rac-monoacylglycerols derived from unsaturated fatty acids

Lipases that display high regioselectivities and broad substrate tolerance were used as catalysts for the efficient esterification of glycerol under the conditions of irreversible acyl transfer. A variety of unsaturated fatty acids, such as oleic, linoleic, erucic, ricinolic, hydroxystearic and coriolic acid, were used for this purpose in the form of their vinyl esters. Suitable biocatalysts were chosen on the basis of systematic screening experiments regarding their regioselectivities (RE) and substrate tolerances. Distinct differences were found and expressed in numerical RE values as a measure for differences of these biocatalysts as being specific, selective, and nonspecific. Based on these experiments, a variety of molecules were synthesized on a preparative scale (>150 mmol) in good yield (ca.85%) and with high regioisomerical purities (>95% RE).     

Behaviour of mortar and concrete at extremely low temperatures

The behaviour of hydrated cement paste, mortar and concrete specimens (age ～ 110 days) was investigated at low temperatures and after cyclic temperature-time histories. The relative changes of thermal strains, compressive and tensile splitting strength as well as the alteration of pore structure were studied. The strength in the frozen state increases with decreasing temperature and rising moisture content. If the frozen water-saturated mortar or concrete is reheated to room temperature a loss of strength is registered. The loss of strength increases with the number of temperature cycles. Storing the specimens at rel. hum. below 85% no losses were registered and no irreversible expansion occured. Water-saturated mortar showed after only 12 cycles an irreversible positive strain of 2,7%, indicating internal damage which was also proved by mercury porosimetry. Thus, the moisture content seems to be one of the decisive factors affecting the sensitivity of mortar and concrete subjected to extremely low temperatures.     

Nucleation and growth behavior of β-nucleated iPP during shear induced crystallization investigated by in-situ synchrotron WAXS and SAXS

Polymer crystallization under flow was investigated because final properties of polymers strongly depend on the crystalline structure and morphology formed during processing. In-situ synchrotron WAXS and SAXS were used to investigate the structure formation and morphological developments during quiescent and shear-induced crystallization of iPP with 3 different concentrations (0.01, 0.03 and 0.1 wt%) of β-nucleating agent. Under quiescent conditions, a high β-content was obtained at all those concentrations indicating the high β-nucleating efficiency of the nucleating agent. After application of shear, the β-nucleating ability at small concentration was retained, while at larger concentrations it was strongly retarded. Furthermore, the addition of β-nucleating agent was beneficial for the molecular alignment during processing, the anisotropic particles of β-nucleating agent were much more effective to align the molecular chains in the flow direction compared to isotropic ones. A crystallization scheme for the iPP β-nucleating agent under shear was proposed.