Hypoxia-ischemia induces a rapid elevation of ubiquitin conjugate levels and ubiquitin immunoreactivity in the immature rat brain

Postnatal rats at 7 and 21 days of age were subjected to unilateral hypoxia-ischemia (H/I) by right carotid artery ligation followed by 1.5 to 2 hours of hypoxia (8% oxygen). Brains were frozen at specific intervals of recovery from 0 to 24 hours. Western blots of samples of right and left forebrain were immunodeveloped with a monoclonal antibody specific for ubiquitin, RHUb1. An elevation of ubiquitin conjugate levels in the right compared with the left forebrain of 7-day-old animals was detectable immediately following H/I and increased by close to 60% of control level within 1 hour of recovery. The conjugate immunoreactivity remained at this level for 6 hours but had declined to control levels by 24 hours of recovery. No such increase was observed in response to hypoxia alone. Similar changes were observed in samples from the 21-day-old rat brain. However, the elevation of ubiquitin conjugate levels was of slower onset and persisted longer than observed for the 7-day-old animals. Immunocytochemical studies of brain fixed by immersion in formaldehyde/acetone/methanol showed that ubiquitin-like immunoreactivity was increased in the right, but not left, cerebral cortex and hippocampus of animals subjected to H/I. The data suggest that elevated ubiquitination may represent a neuroprotective response to H/I.     

Mechanical properties of freely suspended semiconducting graphene-like layers based on MoS2

We fabricate freely suspended nanosheets of molybdenum disulphide (MoS₂) which are characterized by quantitative optical microscopy and high-resolution friction force microscopy. We study the elastic deformation of freely suspended nanosheets of MoS₂ using an atomic force microscope. The Young''s modulus and the initial pre-tension of the nanosheets are determined by performing a nanoscopic version of a bending test experiment. MoS₂ sheets show high elasticity and an extremely high Young''s modulus (0.30 TPa, 50% larger than steel). These results make them a potential alternative to graphene in applications requiring flexible semiconductor materials.PACS, 73.61.Le, other inorganic semiconductors, 68.65.Ac, multilayers, 62.20.de, elastic moduli, 81.40.Jj, elasticity and anelasticity, stress-strain relations.     

Melt spinning and drawing of 2‐methyl‐1,3‐propanediol‐substituted poly(ethylene terephthalate)

The structure and properties of fibers prepared from copolymers of poly(ethylene terephthalate) (PET) in which 2‐methyl‐1,3‐propanediol (MPDiol® Glycol is a registered trademark of Lyondell Chemical Company) at 4, 7, 10, and 25 mol% was substituted for ethylene glycol were studied and compared with those of PET homopolymer. Filaments were melt spun over a range of spinning conditions, and some filaments that were spun at relatively low spinning speeds were subjected to hot drawing. The filaments were characterized by measurements of birefringence, differential scanning calorimetry (DSC) crystallinity, melting point, glass transition temperature, wide‐angle X‐ray diffraction patterns, boiling water shrinkage, tenacity, and elongation to break. Filaments containing 25 mol% MPDiol did not crystallize in the spinline at any spinning speed investigated, whereas the other resins did crystallize in the spinline at high spinning speeds. However, compared with PET homopolymer, increasing substitution of MPDiol reduced the rate at which the crystallinity of the melt spun filaments increased with spinning speed and reduced the ultimate crystallinity that could be achieved by high‐speed spinning. The rate of development of molecular orientation, as measured by birefringence, also decreased somewhat with increasing MPDiol content. Shrinkage in boiling water decreased at high spinning speeds as the amount of crystallinity increased; however, the shrinkage decreased more slowly with increase in spinning speed as MPDiol content increased. Tenacity also decreased slightly at any given spinning speed as MPDiol content increased, but there was no significant effect on elongation to break. The addition of MPDiol in amounts up to 7 mol% increased the maximum take‐up velocity that could be achieved at a given mass throughput. This result indicates that the use of higher spinning speeds could potentially increase the productivity of melt spun yarns. Copolymer filaments spun at low speeds were readily drawn to produce highly oriented fibers with slightly less birefringence, crystallinity, and tenacity than similarly processed PET homopolymer. Preliminary dyeing experiments showed that the incorporation of MPDiol improved the dyeability of the filaments. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2598–2606, 2003     

Development of novel 1,2,3,4-tetrahydroisoquinoline derivatives and closely related compounds as potent and selective dopamine D3 receptor ligands

Based on N-alkylated 1,2,3,4-tetrahydroisoquinoline derivatives, which are structurally related to the partial agonist BP 897, a series of novel, selective dopamine D3 receptor antagonists has been synthesised. Derivatisation included changes in the arylamide moiety and the tetrahydroisoquinoline substructure leading to compounds with markedly improved selectivities and affinities in the low nanomolar concentration range. From the 55 structures presented here, (E)-3-(4-iodophenyl)-N-(4-(1,2,3,4-tetrahydroisoquinolin-2-yl)butyl)acrylamide (51) has high affinity (Ki(hD3)=12 nM) and a 123-fold preference for the D3 receptor relative to the D2 receptor subtype. Its pharmacological profile offers the prospect of a novel radioligand as a tool for various dopamine D3-receptor-related in vitro and in vivo investigations.     

Optimized Growth of Heteroepitaxial (111) NiFe2O4 Thin Films on (0001) Sapphire with Two In‐Plane Variants via Chemical Solution Deposition

(111)‐oriented epitaxial thin films of nickel ferrite (NFO) are grown on c‐plane sapphire [α‐Al₂O₃(0001)] substrates using a chemical solution deposition technique. The processing conditions, including pyrolysis and annealing temperatures, are varied to achieve a film that shows maximum texture and epitaxy. It is shown that increasing the pyrolysis temperature to 400°C and decreasing the annealing temperature to 750°C for 10 min result in the highest degree of texture in the films. Lower film thickness also leads to a higher degree of texture. Microstructural studies confirm an in‐plane epitaxial relationship between the (111) NFO film and the (0001) Al₂O₃ substrate in two variants, [110]_NFO || or .     

On the role of pre-existing defects and magnetic flux avalanches in the degradation of YBa2Cu3O7–x coated conductors by quenching

YBa₂Cu₃O_7–x (YBCO) coated conductors are emerging as an important option for magnets for energy systems and experimental science. One of the remaining challenges for YBCO superconducting magnets is quench protection, i.e. ensuring that the YBCO is not damaged due to a fault condition. One key issue is understanding the underlying causes of degradation during a quench. Here, the microstructure of a quenched, degraded sampled is compared to that of an unquenched control sample. To facilitate microstructural analysis of the YBCO surface, the Cu stabilizer and Ag cap layer were removed by etching. Reactions between the Cu etchant and YBCO proved to be a signature of Ag/YBCO delamination. Two types of pre-existing defects were identified as initiation points of degradation. Defects on the conductor edge resulting in delaminated Ag lead to dendritic flux avalanches and high local heating, which cause further Ag delamination. This self-propagating effect results in dendritic Ag delamination, which is seen through etchant–YBCO reactions. Defects within the YBCO layer result in breaches in the protective Ag layer such that Cu etchant penetrates and reacts with the YBCO. Energy-dispersive X-ray spectroscopy analysis showed similar reactions as in the edge degradation but also showed pure Ag particles, which indicates that the local temperature was sufficient to cause localized Ag melting.     

Effect of 3 storage temperatures on the quality of kiwi fruit pulp concentrated at a reduced pressure

The effect of three storage temperatures (0, -9 and -18 degrees C) of the kiwi-fruit pulp reduced pressure concentrate, by a period of 3 months, in the physical (soluble solids, water activity, consistency and color), chemistry (pH, acidity, ascorbic acid, chlorophyll and pheophytin) and sensorial (appearance, aroma, acidity, sweetness, color and flavor) characteristics were studied. The greater deterioration was produced in the stored pulp to 0 degree C, while to -9 degrees C there is no significative differences, on the other hand, the kiwi-fruit pulp stored to -18 degrees C maintained large part of the original characteristics. It was observed that while the temperature and storage time increased, vitamin C and chlorophyll contents decreased, varying significantly consistency, color and appearance of product. The rest of the analyzed variables did not present significative differences during storage.     

Intermolecular interactions in phytochemical model systems studied by NMR diffusion measurements

Novel functional foods, such as tomato juice with soy, represent a new strategy to increase consumption of health promoting ingredients and phytochemicals. Interactions between soy protein, isoflavones, and tomato carotenoids could impact the bioaccessibility and bioavailability of individual phytochemicals. The primary objective of this study was to assess possible interactions between daidzein and daidzin, soy protein and carotenoids using proton one-dimensional and two-dimensional pulsed field gradient nuclear magnetic resonance spectroscopy experiments.