Pyropheophytin a and 1,2-Diacyl-glycerols Over Time Under Different Storage Conditions in Natural Olive Oils

The effect of storage conditions (light, temperature, container types) and time on the quality of natural olive oils from different cultivars and Australian regions were studied. The oils’ changing quality was monitored through several physico-chemical methods (free fatty acids, peroxide value, UV-spectrometry (K₂₃₂, K ₂₇₀ and ΔK), induction time, total polyphenol content, bitterness, pyropheophytin a and 1,2-diacyl-glycerol content) and sensory analysis over 24 months. Pyropheophytins a and 1,2-diacyl-glycerols criteria showed very good performance as indicators of overall olive oil quality and freshness as well as highlighting any problems during the storage of the product. Pyropheophytin a increment averaged 7 % per year and the 1,2-diacyl-glycerols decreased at an average of 23 % per year at normal storage conditions over time.     

Assessing the Antimicrobial Activity of Polyisoprene Based Surfaces

There has been an intense research effort in the last decades in the field of biofouling prevention as it concerns many aspects of everyday life and causes problems to devices, the environment, and human health. Many different antifouling and antimicrobial materials have been developed to struggle against bacteria and other micro- and macro-organism attachment to different surfaces. However the “miracle solution” has still to be found. The research presented here concerns the synthesis of bio-based polymeric materials and the biological tests that showed their antifouling and, at the same time, antibacterial activity. The raw material used for the coating synthesis was natural rubber. The polyisoprene chains were fragmented to obtain oligomers, which had reactive chemical groups at their chain ends, therefore they could be modified to insert polymerizable and biocidal groups. Films were obtained by radical photopolymerization of the natural rubber derived oligomers and their structure was altered, in order to understand the mechanism of attachment inhibition and to increase the efficiency of the anti-biofouling action. The adhesion of three species of pathogenic bacteria and six strains of marine bacteria was studied. The coatings were able to inhibit bacterial attachment by contact, as it was verified that no detectable leaching of toxic molecules occurred.     

Transparent polycrystalline alumina obtained by SPS: Green bodies processing effect

Starting from a commercial slurry of high purity α-Al₂O₃, freeze-dried powders, cast, filter-pressed or cold isostatically pressed samples were produced. Resulting powders or green bodies showing different particles packing were densified by spark plasma sintering (SPS) to obtain transparent polycrystalline α-Al₂O₃. Microstructure and real in-line transmittance (RIT) after SPS were dependent on the particles packing quality. Avoiding large agglomerates, narrowing the pore size distribution, reducing the most-frequent pore size (D_mode) and avoiding macroscopic heterogeneities within the green bodies enabled high RIT values to be achieved in the visible and near-infrared spectrum. However, a limit was achieved in the preparation of green bodies for which reducing the D_mode had no more influence on the optical behaviour of samples sintered by SPS. Finally, pure α-Al₂O₃ samples presenting a high RIT_640 nm value of 53% were produced from all the green bodies obtained by the following techniques: filter-pressing, slip casting and cold isostatic pressing.     

Shear-induced migration and axial development of particles in channel flows of non-Brownian suspensions

We present an experimental study on the shear-induced migration and axial development of particles in the channel flows of non-Brownian suspensions. The suspending fluid is Newtonian. We investigate fracturing flows with a Hele-Shaw type scaling through building a unique channel setup and an advanced optical system. The local particle concentration profiles are measured via the refractive-index matching technique for a wide range of bulk volume fraction, that is, . Simultaneously, the particle image velocimetry is performed to determine the velocity profile of the particle phase. We compare our experimental results with the available two-phase continuum frameworks and show discrepancies and similarities in the fully developed and axial development of the solid volume fraction profiles. We discuss directions in which the continuum frameworks require improvements.     

Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

Synthesis and Anticancer Properties of Oxazepines Related to Azaisoerianin and IsoCoQuines

In this article, we report the synthesis and biological properties of a series of novel oxazepines related to isoCA-4 having significant antitumor properties. Among them, three oxazepin-9-ol derivatives display a nanomolar or a sub-nanomolar cytotoxicity level against five human cancer cell lines (HCT116, U87, A549, MCF7, and K562). It was demonstrated that the lead compound in this series inhibits tubulin assembly with an IC₅₀ value of 1 μM and totally arrests the cellular cycle in the G2/M phase at the low concentration of 5 nM in HCT116 and K562 cells. Molecular modeling studies perfectly corroborates these promising results.     

Development of the Acidity of Zirconia-Supported Niobia Catalysts

A series of NbO _x /ZrO₂ catalysts containing up to 2.67wt Nb (ca. 80 nominal surface coverage) was prepared by incipient wetness impregnation from niobium oxalate and oxalic acid solution. The structure of the catalysts was monitored by X-ray diffraction and Raman spectroscopy. The results indicated the presence of a surface Nb phase. No evidence for the formation of crystalline Nb₂O₅ species was found. The development of the acidity as a function of Nb loading was monitored by adsorption of a basic probe molecule followed by infrared spectroscopy. The results indicated the appearance of Brnsted acid sites for a threshold of Nb loading. The abundance of Brnsted acid sites correlated well with the isopropanol dehydration activity. The overall behavior was very similar to that reported earlier for the WO _x /ZrO₂ system.     

Characterisation of electrodeposited nanocrystalline Ni–Mo alloys

Ni–Mo nanocrystalline layers were electrodeposited using direct current from citrate–ammonia solutions. The quartz crystal microbalance investigation confirms that the discharge process starts with hydrogen evolution before the onset of the alloy deposition. The grain size was estimated from X-ray line broadening. It decreases when the molybdenum content is increased. It is smaller for layers deposited at pH 9.5 than 8.5. The microhardness exhibits a maximum close to 800 Vickers for _Mo around 17 wt%. For higher _Mo a softening is observed showing a deviation from Hall-Petch behaviour due to small grain size. In deaerated hydrochloric solutions, the layers show a large passivation domain without any pitting. The corrosion currents as well as the passivation currents, higher than for the bulk Hastelloy B alloy, decrease when _Mo is increased.     

Geopolymer assembly by emulsion templating: Emulsion stability and hardening mechanisms

This work investigates emulsion templating to synthesize hexadecane oil/geopolymer composites. In a system with hexadecane as the internal (dispersed) phase and an alkali activated continuous phase without added surfactant, adding aluminosilicate clay particles does not increase resistance against creaming or coalescence, while adding a surfactant (L35 or CTAB) stabilizes the solid-liquid interface. Infrared studies and rheological studies of the associated geopolymerization determined that the presence of the organic phase or surfactant has no significant effect on the geopolymerization kinetics, as determined by the change in time of the Si-O-T IR stretching frequency and the rheological moduli involved during the process. The stabilization of the organic template is reminiscent of Pickering emulsion even though we employ a much greater amount of inorganic material for geopolymer formation. Although the addition of surfactant has a significant effect on the behavior of the paste, the percolation of the network remains unmodified, highlighting the fact that the phenomenon is not dependent on viscosity. Finally, rheological measurements were used to obtain the mass fractal dimension of the as-made gel network, which is able to differentiate the interfacial effect between surfactant molecules with a slightly denser interphase when a cationic surfactant is used.     

Synthesis and characterization of the polyols by air oxidation of soybean oil and its effect on the morphology and dynamic mechanical properties of poly(vinyl chloride) blends

The use of natural additives, with low toxicity and good compatibility, for PVC is becoming increasingly attractive. In this study, soybean oil additives were prepared by air oxidation reactions and blending with PVC. The oxidation reaction produced a significant increase in the number of hydroxyl groups in soybean oil; however, this kind of reaction results in the formation of a heterogeneous structure due to free radical reactions in the medium. The oxidized soybean oil improved the compatibility with PVC due to an increase in the number of polar groups, such as hydroxyls, and thus a reduction in the amount of atactic polymer was observed. Furthermore, an increase in the molecular weight of the oxidized oil, as well as large amounts of polar groups contributes to reducing the migration of oil in the PVC. Regarding the crystallinity of PVC, the use of pure and oxidized soybean oil causes small changes in the crystalline phase of the polymer. Oxidized soybean oil has great potential for usage as a secondary plasticizer for PVC. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42102.