Parameter estimation and optimization techniques for discrete-time semi-Markov models of H.264/AVC video traffic

We investigate a variety of known and new approaches for the estimation of the parameters of discrete-time semi-Markovian traffic models. We focus on modeling video traffic, since the accurate representation of its long-term autocorrelation is a challenge to the parameter estimation methods. The modeling techniques are applied to sample H.264/AVC-encoded video traces. We study their ability to reflect the autocorrelation and variability of the original traffic and also the delay probabilities of a resulting SMP/GI/1 queueing system. The delay probabilities are determined both by simulation and verified analysis of the queue.     

Computer-tailored smoking cessation intervention in a general population setting in Germany: outcome of a randomized controlled trial.

This study reports the outcome of a randomized controlled trial testing a computer-tailored smoking cessation intervention based on the transtheoretical model in a general population setting in Germany. Participants of the smoking intervention study were recruited from an existing general population health examination survey in a university hospital. The sample consisted of 611 current and former smokers at baseline, and of 485 participants in the core group of baseline daily cigarette smokers. Follow-ups were conducted 6, 12, 18, and 24 months after baseline. The intervention was designed for both current and former smokers, involved up to three individualized feedback letters, and was created using expert-system technology. Based on 7-day point-prevalence abstinence and 6-month prolonged abstinence as the outcome measures, the study identified no significant differences between the intervention and control groups. Modeling the full longitudinal data in generalized estimation equation analyses, using different nonresponse procedures, and adjusting for covariates did not alter the results. We conclude that the computer-tailored transtheoretical model-based smoking cessation intervention, as delivered in this study and in this special setting, was ineffective.     

Primary energy and comfort performance of ventilation assisted thermo-active building systems in continental climates

This article presents a simulation study comparing the primary energy and comfort performance of ventilation assisted thermo-active building systems (TABS) relative to a conventional all-air (VAV) system in a compact office building featuring good thermal envelope performance, heat recovery, and solar gain control for the continental climate of Omaha, Nebraska with pronounced heating and cooling periods. TABS heating is accomplished using a geothermal heat pump and TABS cooling using a geothermal heat exchanger without an additional vapor compression cycle required. It was found that the coordination of the TABS and VAV systems is crucial, i.e., supply air temperature and active layer temperature setpoints and reset schedules greatly affect the performance of the overall system. The small contribution of TABS in the heating case shows the need for the adaptation of the ventilation system configuration to the TABS system. Annual cooling energy demand for the ventilation assisted TABS is higher than for the pure VAV system, which is due to lower occupied period room operative temperatures and thus a higher comfort provided. While a 4% useful energy penalty for the combined TABS/VAV was recorded, the VAV case requires 20% more delivered energy than the TABS case because of the displacement of compressor driven coil loads with low-exergy cooling through the ground heat exchanger in the TABS case. A primary energy intensity of 189 kWh/m² a was recorded for the TABS case; in contrast, the conventional all-air (VAV) equipped building incurs a primary energy intensity of 229 kWh/m²a, which represents a penalty of 20%. Clear advantages of the TABS approach can be observed with respect to thermal comfort: during summer cooling periods, the mean radiant temperature of the TABS case is on average 2 K below that of the VAV case. Moreover, the VAV system is associated with a fairly constant predicted mean vote (PMV) value of 0.75, which is quite warm, while the TABS equipped system reveals an average of 0.56, which results in only 12% instead of 17% of people dissatisfied. Based on these results, ventilation assisted thermo-active cooling systems appear to be a very promising alternative to conventional all-air systems offering both significant primary energy as well as thermal comfort advantages provided the TABS is mated with low-exergy heating and cooling sources.     

Bistable swirled flames and influence on flame transfer functions

Large Eddy Simulations (LES) are used to study a lean swirl-stabilized gas turbine burner where the flow exhibits two stable states. In the first one, the flame is attached to the central bluff body upstream of the central recirculation zone which contains burnt gases. In the second one the flame is detached from the central bluff body downecirculation zone which is filled by cold unburnt gases and dominated by a strong Precessing Vortex Core (PVC). The existence of these two states has an important effect on the dynamic response of the flame (FTF): both gain and phase of the FTF change significantly in the detached case compared to the attached one, suggesting that the stability of the machine to thermoacoustic oscillations will differ, depending on the flame state. Bifurcation diagrams show that the detached flame cannot be brought back to an attached position with an increased fuel flow rate, but it can be re-attached by forcing it at high amplitudes. The attached flame however, behaves inversely: it can be brought back to the detached position by both decreasing or increasing the pilot mass flow rate, but it remains attached at all forcing amplitudes.     

On the Value of Monitoring Information for the Structural Integrity and Risk Management

This article introduces an approach and framework for the quantification of the value of structural health monitoring (SHM) in the context of the structural risk and integrity management for systems. The quantification of the value of SHM builds upon the Bayesian decision and utility theory, which facilitates the assessment of the value of information associated with SHM. The principal approach for the quantification of the value of SHM is formulated by modeling the fundamental decision of performing SHM or not in conjunction with their expected utilities. The expected utilities are calculated accounting for the probabilistic performance of a system in conjunction with the associated structural integrity and risk management actions throughout the life cycle, the associated benefits, structural risks, and costs and when performing SHM, the SHM information, their probabilistic outcomes, and costs. The calculation of the expected utilities necessitates a comprehensive and rigorous modeling, which is introduced close to the original formulations and for which analysis characteristics and simplifications are described and derived. The framework provides the basis for the optimization of the structural risk and integrity management based on utility gains including or excluding SHM and inspection information. Studies of fatigue deteriorating structural systems and their characteristics (1) provide decision support for the performance of SHM, (2) explicate the influence of the structural component and system characteristics on the value of SHM, and (3) demonstrate how an integral optimization of SHM and inspection strategies for an efficient structural risk and integrity management can be performed.     

Introducing a Semi-Coated Model to Investigate Antibacterial Effects of Biocompatible Polymers on Titanium Surfaces

Peri-implant infections from bacterial biofilms on artificial surfaces are a common threat to all medical implants. They are a handicap for the patient and can lead to implant failure or even life-threatening complications. New implant surfaces have to be developed to reduce biofilm formation and to improve the long-term prognosis of medical implants. The aim of this study was (1) to develop a new method to test the antibacterial efficacy of implant surfaces by direct surface contact and (2) to elucidate whether an innovative antimicrobial copolymer coating of 4-vinyl-N-hexylpyridinium bromide and dimethyl(2-methacryloyloxyethyl) phosphonate (VP:DMMEP 30:70) on titanium is able to reduce the attachment of bacteria prevalent in peri-implant infections. With a new in vitro model with semi-coated titanium discs, we were able to show a dramatic reduction in the adhesion of various pathogenic bacteria (Streptococcus sanguinis, Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis), completely independently of effects caused by soluble materials. In contrast, soft tissue cells (human gingival or dermis fibroblasts) were less affected by the same coating, despite a moderate reduction in initial adhesion of gingival fibroblasts. These data confirm the hypothesis that VP:DMMEP 30:70 is a promising antibacterial copolymer that may be of use in several clinical applications.     

Amphiphilic behaviour of poly(glycidol)-based macromonomers and its influence on homo-polymerisation in water and in water/benzene mixture

The properties of amphiphilic polyether macromonomers and their behaviour during homo-polymerisation in water and in water/benzene mixture are reported. Homo-poly(glycidol) macromonomer bearing polymerisable p-vinyl benzyl end groups (PGl55-St) and two block poly(glycidol)-b-poly(glycidyl phenyl ether) macromonomers, containing polymerisable p-vinyl benzyl end groups attached to the hydrophobic (PGl52-b-PGlPhE8-St) or hydrophilic (PGlPhE9-b-PGl54-St) block were used for investigations. DLS measurements showed formation of micelles by all macromonomers, what is the reason for enhanced homo-polymerisation. In water the polymerisation initiated with 4,4′-azobis(4-cyanovaleric acid) was fast, while macromonomer conversion was over 90%. Introduction of benzene to the polymerisation system resulted in formation of swollen (less packed) micelles and to a decrease of the local concentration of double bonds in the micelle core. As a result the decrease of reaction rate followed by longer polymerisation time in case of PGl55-St and PGl52-b-PGlPhE8-St was observed. Nevertheless, their conversion remained high and varied from 95 to 10. In contrast for PGlPhE9-b-PGl54-St increase of polymerisation rate, accompanied by slight increase of conversion was observed for homo-polymerisation in water/benzene mixture.