Entwurf und Konstruktion der Egg‐Graben Brücke

Aufgrund der hohen Erhaltungskosten von Brücken gibt es mittlerweile unterschiedliche Ansätze, um die Dauerhaftigkeit zu erhöhen. Vorgespannte Brücken ohne Betonstahl stellen hierfür einen neuen Ansatz dar. Zur Erforschung des Tragverhaltens solcher Strukturen wurde ein Forschungsprojekt gestartet und Großversuche durchgeführt. Die Landesbaudirektion Salzburg war von dieser innovativen Idee überzeugt und hat deshalb die Technologie beim Bau der Egg‐Graben Brücke ausgeschrieben. Die Egg‐Graben Brücke ist eine im Grundriss gekrümmte Bogenbrücke mit einer Länge von 50 m. Nach einer Bauzeit von 18 Monaten erfolgte im November 2009 die Freigabe für den Verkehr. Der vorliegende Aufsatz beschreibt die Technologie, den Entwurf sowie die beim Bau der Brücke gesammelte Erfahrung. Design and Construction of the Egg‐Graben Bridge Due to the high maintenance costs of bridges, there are now various approaches to enhance the durability. Post tensioned bridges without steel reinforcement represent one of these approaches. To investigate the structural behaviour of such constructions, a research project was started and large‐scale tests were carried out. The government of the province of Salzburg could be convinced of this innovative technology and tendered out the method for the construction of the Egg‐Graben Bridge. For the arch bridge, which is curved in plan, the superstructure is prestressed without using further steel reinforcement. After a construction period of 18 months the bridge was opened to traffic in November 2009. The paper describes the technology, the design and the experience gained from the construction of the bridge.     

Self-Assembled Germanium Quantum-Dot Supercrystals in Silicon with Extremely Low Thermal Conductivities for Thermoelectrics

Superlattices with one-dimensional (1D) phonon confinement were studied to obtain a low thermal conductivity for thermoelectrics. Since they are composed of materials with a lattice mismatch, they often show dislocations. Like 1D nanowires, they also decrease heat transport in only one main propagation direction. It is therefore challenging to design superlattices with a thermoelectric figure of merit ZT higher than unity. Epitaxial self-assembly is a major technology to fabricate three-dimensional (3D) Ge quantum-dot (QD) arrays in Si. They have been used for quantum and solar-energy devices. Using the atomic-scale phononic crystal model, 3D Ge QD supercrystals in Si also present an extreme reduction of the thermal conductivity to a value that can be under 0.04 W/m/K. Owing to incoherent phonon scattering, the same conclusion holds for 3D supercrystals with moderate QD disordering. As a result, they might be considered for the design of highly efficient complementary metal–oxide–semiconductor (CMOS)-compatible thermoelectric devices with ZT possibly much higher than unity. Such a small thermal conductivity was only obtained for two-dimensional layered WSe₂ crystals in an experimental study. However, electronic conduction in the Si/Ge compounds is significantly enhanced. The 0.04 W/m/K value can be computed for different Ge QD filling ratios of the Si/Ge supercrystal with size parameters in the range of current fabrication technologies.     

Inorganic carbon limitations on nitrification: experimental assessment and modelling

Nitrification is a two-step process that involves two different biomass populations: ammonia oxidising biomass (AOB) and nitrite oxidising biomass (NOB). Both populations are autotrophic (i.e. their carbon source is inorganic). Therefore, a deficit of this substrate should result in a decrease of the process rate. Recent technology advances such as the SHARON process have brought new scenarios in biological nitrogen removal where these limitations should be considered. Hence, this work examines the inorganic carbon limitation using respirometric and titrimetric techniques. For this aim, the nitrification rate was measured at different total inorganic carbon (TIC) concentrations. The experimental results obtained show that AOB was limited at TIC concentrations lower than 3mmol CL(-1). At the same time, no carbon source limitation for NOB was observed in spite of the low TIC concentrations attained (lower than 0.1mmol CL(-1)). The AOB limitation could be successfully modelled using Monod, Tessier and sigmoidal kinetics. The best fit was obtained with sigmoidal kinetics. However, unexpected biomass activity (oxygen consumption) was observed despite a very low TIC concentration (lower than 0.1mmol CL(-1)).     

Phase equilibria of hydrates from ternary mixtures of methane + ethane + propane and methane + propane + carbon dioxide

Hydrate–liquid–vapour (HLV) equilibrium of aqueous clathrates formed from gas mixtures can be complex compared to hydrates formed with single guests. Typically, pressure and temperature are controlled to obtain these data, but for multicomponent systems, it is necessary to control/report more intensive variables, namely, composition. Metastability, manifested as impractically long experimental times, has been reported to be a challenge with some multicomponent systems. We present HLV equilibrium conditions of two ternary gas mixtures: methane + ethane + propane (90:7:3 molar ratio) and methane + propane + carbon dioxide (55:5:40 molar ratio). Conditions varied in the temperature range of 275–285 K and the pressure range of 1.24–4.75 MPa. Experimental standard uncertainties were on average 0.10 K and 0.005 MPa for methane + ethane + propane and 0.19 K and 0.005 MPa for methane + propane + carbon dioxide. Our technique allowed us to bypass the limitations reported in the literature and provided fast, reproducible HLV equilibria for gas-dominated systems.     

Rail RCF damage quantification and comparison for different damage models

There are several fatigue-based approaches that estimate the evolution of rolling contact fatigue(RCF)on rails over time and built to be used in tandem with mul...     

Role of soil health in maintaining environmental sustainability of surface coal mining

Mountaintop coal mining (MCM) in the Southern Appalachian forest region greatly impacts both soil and aquatic ecosystems. Policy and practice currently in place emphasize water quality and soil stability but do not consider upland soil health. Here we report soil organic carbon (SOC) measurements and other soil quality indicators for reclaimed soils in the Southern Appalachian forest region to quantify the health of the soil ecosystem. The SOC sequestration rate of the MCM soils was 1.3 MgC ha(-1) yr(-1) and stocks ranged from 1.3 ± 0.9 to 20.9 ± 5.9 Mg ha(-1) and contained only 11% of the SOC of surrounding forest soils. Comparable reclaimed mining soils reported in the literature that are supportive of soil ecosystem health had SOC stocks 2.5-5 times greater than the MCM soils and sequestration rates were also 1.6-3 times greater. The high compaction associated with reclamation in this region greatly reduces both the vegetative rooting depth and infiltration of the soil and increases surface runoff, thus bypassing the ability of soil to naturally filter groundwater. In the context of environmental sustainability of MCM, it is proposed that the entire watershed ecosystem be assessed and that a revision of current policy be conducted to reflect the health of both water and soil.     

Welding of twinning-induced plasticity steels

This work focuses on the technical and technological aspects of fusion welding of high-manganese steels exhibiting twinning-induced plasticity (TWIP) for both similar and dissimilar joints. Changes in the alloy chemistry resulting from evaporation and dilution are discussed with respect to stacking fault energy and austenite stability. The influence of fusion welding on grain size and strength is also discussed. Conclusions are drawn with respect to optimization processes for fusion welding of TWIP steel.     

Improving dynamic response of power-factor correctors by usingseries-switching postregulator

A new method to improve the dynamic response of power-factor correctors (PFCs) is described in this paper. The method is based on the use of a new very highly efficient postregulator, called a series-switching postregulator. This new postregulator exhibits very high efficiency due to the fact that only a part of the total power undergoes a power conversion process. The proposed postregulator can be used with any PFC topology (either with or without a transformer), with no modifications in the topology, and can be easily protected against short circuits