Biomimetic Synthesis of a Water‐Soluble Conducting Polymer of 3,4‐Ethylene‐dioxythiophene

A novel biomimetic route for the synthesis of a water‐soluble poly(3,4‐ethylenedioxithiophene) (PEDT) in the presence of poly(styrene sulfonate) (PSS) and using iron(III)‐tetra(p‐sulfonatophenyl)porphyrin (Fe^IIITSPP), cobalt(III)‐tetra(p‐sulfonatophenyl)porphyrin (Co^IIITSPP), manganese(III)‐tetra(p‐sulfonatophenyl)porphyrin (Mn^IIITSPP), and copper(II)‐tetra(p‐sulfonatophenyl)porphyrin (Cu^IITSPP) as effective catalysts is presented. The reactions were performed with different monomer, catalyst, template, and initiator concentrations. The absorbance of the polaron bands at various pH values indicated pH 2 as the best condition for polymerization. Precipitation or salting out was highly dependent on the mentioned factors. The formation of PEDT was confirmed by UV‐Vis and FT‐IR spectroscopy. Cyclic voltammetry proved the convenient electroactivity of the synthesized polymer. The presence of PSS that serves as a charge‐compensating dopant provides processability and water solubility and, in addition, a distinct advantage over similar reactions employing native enzymes due to higher stability and lower cost of the catalysts.     

Solid State 13C NMR and Diffuse Reflectance Mid-Infrared Spectroscopic Analysis of the Effects of Retting on the Chemical Composition of KenafFibre

Bast ribbons from Tainung 1 (T₁) and Guatemala 45 (G₄₅) cultivars of kenaf ( Hibiscus cannabinus ) were subjected to a chemical retting process. The resulting changes at the base and tip regions of each cultivar were analysed using solid-state ¹³C NMR and diffuse reflectance mid-infrared spectroscopies. Chemical retting was performed by boiling the substrates in NaOH (70 g litre⁻¹) +NaHSO₃ (5 g litre⁻¹) for 1 h, after which they were neutralised, washed and air dried. This process produced large decreases in the non-cellulosic components, though 25% of the phenolic component was left undegraded, and cellulose crystallinity was increased by ∽5% over that in unretted samples.     

Electroreduction of oxygen on gold-supported nanostructured palladium films in acid solutions

The electrochemical reduction of oxygen on thin Pd films with a nominal thickness of 0.25-10 nm on polycrystalline Au substrate (Pd/Au) was studied. The Pd films were prepared by electron beam evaporation and oxygen reduction was studied in 0.1 M HClO₄ and 0.05 M H₂SO₄ solutions using the rotating disk electrode (RDE) method. The surface morphology of Pd overlayers was examined by scanning tunnelling microscopy (STM). O₂ reduction predominantly proceeds through 4e⁻ pathway on all Pd/Au electrodes. The specific activity (SA) of oxygen reduction was lower in H₂SO₄ solution and decreased slightly with decreasing the Pd film thickness. In HClO₄, the SA was higher and not significantly dependent on the film thickness. The Tafel slope values close to −60 mV at low current densities and −120 mV at high current densities were found for all electrodes.     

Evaluation of Novalak Resins as a precursor for fabrication of carbon – carbon composites. Part I. Optimization of curing stages

Curing of novalak resin has been investigated by applying different thermal analysis methods and solvent extraction technique. Results revealed that cure can be optimized by finding the critical steps in cure and hold resin in these steps for appropriate time. Best results were also achieved by using resins which contained lower free phenol and hexamine amount. Application of pressure is necessary in initial stages of cure but found to be harmful in the final stages. It was also found that due to the defects produced in the final stages of curing, this process cannot be completed and long time post cure should be applied on these resins. By applying a special curing regime, it was proved that defects during pyrolysis stage could be decreased profoundly and a carbon residue of more than 67 percent expected. The results are explained by emphasis on carbon – carbon applications.     

Cold water immersion modulates the reinforcing effects of nitrous oxide in healthy volunteers.

The purpose of this study was to determine if a contextual variable manipulation, water temperature of a bath in which a forearm was immersed, would modulate the reinforcing effects of nitrous oxide (N?O) in healthy volunteers (N?=?12). Each of 2 separate choice experiments consisted of a lukewarm water session and a cold water session. Each session consisted of 3 trials: The 1st 2 were sampling trials in which participants inhaled either 100% oxygen or 40% N?0 for 25 min, and the last trial was a 25-min choice trial, in which participants chose between the 2 agents. In each of the 3 trials, participants immersed their forearm in either ice-cold or lukewarm water for 3 min. A variant of the McNemar test revealed that participants were more likely to choose N?O on cold water sessions than on warm water sessions. The authors conclude that N?O was more reinforcing when participants forearms were immersed in ice-cold water than when immersed in lukewarm water. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Dietary CLA alters yolk and tissue FA composition and hepatic histopathology of laying hens

The effect of dietary CLA along with n-3 PUFA on yolk FA profile and hepatic lipid accumulation was investigated. Laying hens (n=40) were randomly assigned to four experimental diets containing 0, 0.5, 1.0, or 2.0% CLA. Menhaden oil was used as the source of n-3 PUFA. Dietary CLA did not affect the total lipid content of egg yolk (P>0.05). The amounts of CLA isomers (cis-9 trans-11, trans-10 cis-12) in the egg yolk were proportional to the levels of CLA in the diet (P<0.05). The total CLA content in the egg yolk was 0, 0.97, 2.4, and 5.3 wt%, respectively (P<0.05). Addition of CLA resulted in an increase in saturated FA (P<0.05) with a concomitant reduction in monounsaturated FA (P<0.05) in the yolk, liver, abdominal fat, breast, and thigh muscle. No difference in saturated and monounsaturated FA content in heart and spleen tissue was noted. Dietary CLA at all concentrations resulted in an increase (P<0.05) in the total number of fat vacuoles and lipid infiltration in hepatocytes. The number of cells with 75% or higher lipid vacuolation in the cytoplasm was also increased (P<0.05) by 2.0% CLA. Dietary CLA at 0.5% levels resulted in an increase (P<0.05) in the total lipid content of hepatic tissue. The total lipid content in leg muscle was lower (P<0.05) in CLA-fed birds. However, no effect of CLA on lipid content of breast muscle, heart, spleen and adipose tissue was observed (P>0.05). The current study used CLA in a FFA form. The effects of using CLA in other form such as TG on avian hepatic tissue need to be investigated.     

Performance optimization of current focusing and virtual electrode strategies in retinal implants

The electrode configuration in an implanted visual prosthesis array affects the spatial electric field distribution within the retina, contributing to current focusing and virtual electrode (VE) stimulation strategies. In this paper, a finite element model incorporating various electrode configurations was used to study the interaction between electrode size and electrode-to-cell distance in current focusing and VE stimulation paradigms. The electrode array unit comprises an active electrode, six flanking return electrodes and a distant monopolar return. A quasi-monopolar (QMP) fraction is defined as the proportion of current which can be preferentially returned through the distant return, in comparison with the more adjacent flanking electrodes. The simulation results indicate that current focusing and VE strategies can be optimized by tuning the QMP fraction. The QMP fraction is adjusted to optimize the electric field spread based on retinal ganglion cell (RGC) density in the degenerate retina, thereby offsetting the effect of inhomogeneous distribution of surviving RGCs and leading to a uniform stimulation paradigm across electrodes. Importantly, there is negligible difference in functional performance across electrode configurations for distances less than the electrode diameter, implying that the stimulation mode does not significantly affect activation threshold or activated retinal area for electrode diameters greater than the retinal thickness. Furthermore, the QMP fraction has a significant effect on VE performance, defined by activation threshold and activated retinal area, when threshold current is evenly divided between two adjacent active electrodes.     

Synthesis and Characterization of Nb Substitution on (Bi-Pb)-2223 Superconductors

In this study, samples of \(\hbox {Bi}_{1.65}\hbox {Pb}_{{ 0.35-x}}\hbox {Nb}_{{ x}}\hbox {Sr}_{2}\hbox {Ca}_{2}\hbox {Cu}_{3}\hbox {O}_{10+\delta }\) were prepared by solid-state reaction method and the effect of Nb substitution for Pb on the structural and superconducting properties of this material was investigated. The room-temperature X-ray diffraction patterns indicated that all the samples have the dominant phase of high-\({T}_{\mathrm{c}}\) (Bi-2223). However, other phases such as Bi-2212 and some impurity phases like \(\hbox {SrCu}_{2}\hbox {O}_{2}\), \(\hbox {CuNb}_{2}\hbox {O}_{6}\), \(\hbox {CaCuO}_{3}\) and CuO were also obtained from XRD patterns. An increasing amount of \(\hbox {Nb}^{+5}\) substitutions for \(\hbox {Pb}^{+2}\) led to a phase transition from Bi-2223 to Bi-2212. Electrical resistivity and magnetic measurements revealed that the critical temperature and the critical current density decreases with increasing Nb content due to the enhancement of Bi-2212 phase and appearance of impurities. SEM images indicated that samples porosity changes due to the disrupted grain growth with the substitution of Pb ions with Nb ions.     

Robust nonlinear control schemes for finite-time tracking objective of a 5-DOF robotic exoskeleton

This paper investigates the finite-time robust tracking problem for a 5-DOF (degrees of freedom) upper-limb exoskeleton robot subjected to parametric uncertainties, unmodelled dynamics, and unknown human efforts. By developing the non-singular terminal sliding mode control approach, three innovative schemes of robust torques are proposed to steer configuration variables (angular displacements of joints) of the 5-DOF robotic exoskeleton to the reference trajectories within adjustable finite times. Based on mathematical analysis, it is proven that all suggested schemes of control inputs (input torques) accomplish and provide the mentioned tracking objective accurately. In addition, several new formulas (in the form of inequalities) are derived to determine and tune the needed finite times for achieving the tracking objective. Finally, three numerical examples are given to show the appropriate performance and the acceptable effectiveness of the proposed finite-time robust control schemes.     

Reducing Host Interference from Spread Spectrum Watermarking

Spread spectrum watermarking (SSW) is one of the most promising watermarking techniques. While SSW is very robust against additive noise, it suffers from an inherent noise. The noise results from host interference on detection of the embedded hidden information. The host interference is one of the main reasons for the relatively low embedding rate in SSW and its reduction is important. In this paper, a new method for use in an SSW detector is proposed to reduce the host interference. The proposed method is based on the law of large numbers and symbol detection of embedded information, instead of bit detection. Since the method is based on the detection of symbols longer than one bit, the detector can employ PN sequences with a larger length, resulting in decrease of the interference. The symbol error rate using this algorithm is calculated employing the maximum a posteriori criterion. Comparison of bit error rates between the modified SSW algorithm and conventional bit detection shows that the modified algorithm is much more robust against the host interference.