Growth of silicon nanowires on H-terminated Si {111} surface templates studied by transmission electron microscopy

We have studied the growth of silicon nanowires (SiNWs) by means of transmission electron microscopy. SiNWs are grown from nanocatalysts via the Vapor-Liquid-Solid (VLS) mechanism using silane (SiH4) gas as a source gas. The nanocatalysts are prepared on a hydrogen (H)-terminated Si surface. We have examined the formation mechanism of nanocatalysts on H-terminated surface and have observed several structural variants of SiNWs. According to the study we have suggested that many structural variations of SiNWs are possible, which modify the structural properties of SiNWs to great extents.     

Direct imaging of molecular chains in a poly(p-xylylene) single crystal

Individual chains comprising a β-form poly(p-xylylene) (PPX) single crystal were resolved with a high resolution electron microscope (JEM-500). In a polymer crystal the important limiting factor for resolution is radiation damage. The total end point dose of a PPX crystal is about 0.5 coulomb cm^?2 for 500 kV electron irradiation which is more than 20 times greater than that for a polyethylene crystal. The high resolution image obtained was processed by optical filtering to reduce noise due to the granularity of film. The processed image, which corresponds to the ab-plane projection of polymer chains, shows clearly the mutual arrangement of each molecule in the crystal. This high resolution image is sufficient to provide a starting point for determining the unknown crystal structure of the β-modification of PPX.     

Competitive adsorption of α-lactalbumin in the molten globule state

The molten globule state of α-lactalbumin is a partially denatured form with native-like secondary structure and disordered tertiary structure. Using circular dichroism measurements, it was demonstrated that the molten globule state was produced by decreasing the pH to 2.0 at 25°C or by removing bound Ca²⁺ by treatment with ethylenediamine—tetraacetic acid (EDTA) at pH 7.5 and 40°C. Tension measurements showed that α-lactalbumin in the molten globule state is more easily unfolded at liquid interfaces than is the native protein. Results of competitive adsorption experiments involving α-lactalbumin and β-lactoglobulin at the oil droplet surface in emulsions are consistent with preferential adsorption of α-lactalbumin during emulsification when it is in the molten globule state. In contrast to the difficulty of exchange between α-lactalbumin and β-lactoglobulin at the oil-water interface in emulsions at 25°C, it has been found that the two whey proteins are able partially to displace one another from the oil—water interface at 40°C. While native α-lactalbumin was found to be readily displaced from the oil—water interface by β-lactoglobulin at 40°C, it was found that α-lactalbumin in the molten globule state in the presence of EDTA at 40°C had itself the capacity for displacing β-lactoglobulin from the interface.     

Low Capture Switching Activity Test Generation for Reducing IR-Drop in At-Speed Scan Testing

At-speed scan testing, based on ATPG and ATE, is indispensable to guarantee timing-related test quality in the DSM era. However, at-speed scan testing may incur yield loss due to excessive IR-drop caused by high test (shift & capture) switching activity. This paper discusses the mechanism of circuit malfunction due to IR-drop, and summarizes general approaches to reducing switching activity, by which highlights the problem of current solutions, i.e. only reducing switching activity for one capture while the widely used at-speed scan testing based on the launch-off-capture scheme uses two captures. This paper then proposes a novel X-filling method, called double-capture (DC) X-filling, for generating test vectors with low and balanced capture switching activity for two captures. Applicable to dynamic & static compaction in any ATPG system, DC X-filling can reduce IR-drop, and thus yield loss, without any circuit/clock modification, timing/circuit overhead, fault coverage loss, and additional design effort.

Liquid film dryout in a boiling channel under flow oscillation conditions

A simple theory was developed to elucidate the influence of sinusoidal oscillation of the inlet flow rate on the occurrence of liquid film dryout in an annular two-phase flow regime in a boiling channel. The theory assumes that the critical heat flux (CHF) under an oscillatory condition can be calculated from values in steady states provided that the effect of axial mixing of the liquid film is appropriately considered. The trends of CHFs calculated using a one-dimensional three-fluid model and those experimentally measured under atmospheric pressure were in reasonable agreement with the proposed theory. However, the CHF values measured under oscillatory conditions were usually higher in the experiment than in the numerical simulation, which indicated that axial liquid transport induced by disturbance waves might enhance axial mixing of the liquid film.     

Direct contact melting of porous material

The direct contact melting of a porous material is investigated experimentally and analytically. The phase change material (PCM) is made of fine ice particles of a nearly uniform diameter, which is changed as a parameter. In the analysis, two models are proposed. One is calculated as the direct contact melting of a monolithic sample and another is treated as an assembly of the direct contact melting of the individual particles. As a result, it was found that the heat flux increased with the diameter, due to increase of permeability in a case of small diameter. But, in a case of large diameter, the heat flux decreased as the particle diameter increased because the direct contact melting occurred independently for the individual particles.     

Development of rapid hygrothermal pasteurization using saturated water vapor

We developed a novel rapid hygrothermal pasteurization (RHP) method using saturated water vapor with a dew point of 100 °C. In the present study, the effects of RHP on microbiological quality and quality attributes such as color changes, firmness and ascorbic acid content on many fresh-cut fruits and vegetables (cabbage, cucumber, carrot, cherry tomato, bell pepper, strawberry, pineapple and melon) were investigated. The RHP was performed within a second by free-falling samples through a cylindrical processing chamber filled with steam. The RHP resulted in a 0.7–2.0 log order reduction in the numbers of naturally inoculated mesophilic bacteria. Furthermore, the RHP induced no significant changes in color and firmness of samples, except on the leafy vegetable, cabbage. Ascorbic acid was also retained approximately 80% and above. These results indicate that the RHP is a clean and effective method for decontaminating mesophilic bacteria on fresh fruits and vegetables with minimal changes in quality.Industrial relevanceIn fresh-cut industry, an effective and risk-free decontamination technology is required for use in place of a conventional method, washing by chlorine that can produce carcinogenic chlorinated by-products. In this study, the rapid hygrothermal pasteurization (RHP) method using saturated water vapor was invented and their ability for applying minimal processing was evaluated. The results showed that RHP, without using chemicals, can reduce microorganism load and preserve quality attributes in many kinds of fresh-cut fruits and vegetables. Therefore, RHP could be used as a novel method, which can be generally applicable to fresh-cut fruits and vegetables in the food industry.     

Study on the determination of pesticide residues in crops by ion-trap GC/MS/MS

Ion-trap GC/MS/MS was evaluated for the multi-residue determination of pesticides in agricultural products. Matrices were extracted from samples (spinach, carrot, onion and brown rice) with acetone and submitted to gel permeation chromatography, followed by a clean-up step through a graphite carbon cartridge. Thirty-five pesticides were added to either matrix, and analyzed by GC/MS/MS. Detection limits of pesticides by GC/MS/MS was almost the same as those by GC/MS (SIM). Coefficients of variation of peak area in 5 measurements of each pesticide at 0.1 microgram/mL or 0.05 microgram/mL with or without matrices were mostly acceptable, though those of 20 pesticides out of 35 were higher than 10% at a concentration of 0.02 microgram/mL. It was indicated that matrix artifacts, which interfere with GC/MS-Scan analysis, could be eliminated in some cases by using GC/MS/MS.     

Enantiomeric distribution of odour-active epoxyaldehydes in yuzu (Citrus junos Sieb. ex Tanaka)

The odour-active epoxyaldehydes cis-4,5-epoxy-(E)-2-decenal (1), trans-4,5-epoxy-(E)-2-decenal (2), and trans-4,5-epoxy-(E,Z)-2,7-decadienal (3) are present in yuzu (Citrus junos Sieb. ex Tanaka) volatile oil. These epoxyaldehydes have two chirality centres at the C4 and C5 positions in the epoxide moiety. To date, little is known about the enantiomeric distributions of the expoxyaldehydes in natural products. In this study, we examined the enantiomeric distributions of the epoxyaldehydes in yuzu volatile oil using multidimensional gas chromatography. The standard substrates used for 1 and 3 were synthesised enantioselectively using the Katsuki-Sharpless epoxidation. Standard substrates used for 2 were made via the asymmetric organocatalytic epoxidation with a proline-derivative catalyst. The 4S,5R- and 4R,5S-enantiomers of 1 were obtained in moderate enantiomeric excess (44–66 % ee), while 4S,5S- and 4R,5R-enantiomers of 2 and 3 were obtained in high enantiomeric excess (2, 90–92 % ee; 3, 96 % ee). Enantioselective multidimensional gas chromatography-mass spectrometry (enantio-MDGC-MS) revealed that the chiral centres at C4 and C5 in the cis-form (1) have the (4R,5S) absolute configuration, while trans-forms (2 and 3) have the (4S,5S) configuration. The finding of the absolute configuration at C5 (S) suggests that the optically active epoxyaldehydes may be formed along with retention of the S configuration at C13 of the lipid hydroperoxides 13(S)-hydroperoxy-9(Z),11(E)-octadecadienoic acid (13S-HPOD) or 13(S)-hydroperoxy-9(Z),11(E),15(Z)-octadecatrienoic acid (13S-HPOT) during enzymatic lipid oxidation. Finally, we propose a pathway for the formation of the optically active epoxyaldehydes in yuzu.