Development of cable fault location method using fiber optic distributed temperature sensor

When ground-fault problems occur on a cable line, immediate fault location and restoration are required. Therefore, various new methods to locate the fault point instantaneously have been investigated to replace such conventional methods as the Murray loop method and the pulse radar method [1]. These methods require a long time to locate the fault point. One possible fault location method is to sense the temperature rise following a ground fault using a fiber optic distributed temperature sensor. Application of this method was found feasible through sensing the temperature rise at a ground-fault test using a thermocouple as a temperature sensor with test cables [4]. A power/optical composite cable was prepared experimentally and after verifying its thermal mechanical performance, the temperature rise at an incidence of a fault was determined and the anticipated performance was demonstrated in a ground-fault test. This article describes the outline of the test.     

Decoder Initializing Technique for Improving Frame-Erasure Resilience of a CELP Speech Codec

The authors present and evaluate a technique for synchronizing the internal states of a code-excited-linear-prediction (CELP) encoder and decoder after the occurrence of frame erasure. The designed technique, called ldquoduplicated transmission (DT),rdquo uses some redundant information for realizing synchronization. The encoder performs encoding processes twice and sends two codes for each frame. One code is encoded by an encoder that is initialized. The code is used in cases where the previous frame is erased. An onset detector is combined with the DT technique to select the frames to which the DT should be applied. Subjective test results suggest that, by introducing DT selectively, the number of DT frames is reducible by about 80% without degrading the subjective quality. Results demonstrate that synchronization of the internal states is effective in cases of erasure of onset. The DT technique requires no additional algorithmic delay. For that reason, it would a better choice for particular applications for which the delay has a significant impact.     

The cause of the uneven carbonization process in wet coal charging in coke oven chamber

In the case of the wet coal charging process in coke oven chamber, it is known that the coking process is uneven and a local carbonization delay occurs. The reason was investigated through a laboratory-scale experiment and a quantitative estimation. A partial carbonization test in a test coke oven replicated the uneven plastic layer and local carbonization delay. It was revealed that most of the gas generated in the uncarbonized coal layer results from the evaporation of condensed water and that steam can break through the plastic layer in a test coke oven. Moreover, the order estimation implied that steam that generates in the uncarbonized coal layer and breaks through the plastic layer has sufficient heat capacity to cool the heating wall and delay the carbonization. It was also shown that the steam pressure peak measured in a commercial coke oven is much lower than the estimated steam pressure in this study assuming steam not breaking through the plastic layer. The above-mentioned results and quantitative investigation strongly support the ‘steam breaking through the plastic layer’ theory proposed by Dr. Rohde that an uneven carbonization process is caused by vaporized coal moisture breaking through the plastic layer at definite, unforeseeable points, which results in cooling of the wall by the steam flow.     

Effect of 8 MeV electron irradiation on electrical properties of CuInSe2 thin films

Radiation damages due to 8 MeV electron irradiation in electrical properties of CuInSe₂ thin films have been investigated. The n-type CuInSe₂ films in which the carrier concentration was about 3×10¹⁶ cm⁻³, were epitaxially grown on a GaAs(0 0 1) substrate by RF diode sputtering. No significant change in the electrical properties was observed under the electron fluence <3×10¹⁶ e cm⁻². As the electron fluence exceeded 10¹⁷ e cm⁻², both the carrier concentration and Hall mobility slightly decreased. The carrier removal rate was estimated to be about 0.8 cm⁻¹, which is slightly lower than that of III–V compound materials.     

Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

Suppression of photo-induced dilation in cyanide treated hydrogenated amorphous silicon films

Effects of cyanide (CN) treatment with hydrogenated amorphous silicon (a-Si:H) films have been investigated. The decrease of ΔV/V was observed in cyanide treated a-Si:H films and the successive thermal annealing at 200°C after CN treatment induced the further reduction of the ΔV/V. XPS spectra show the indirect evidence that the cyanide species is present within 10 nm from the hydrogenated amorphous silicon surface. The results of CN treatment with a-Si:H solar cells are demonstrated.     

Ideal crosslinked-polymers and their characterization in free-radical monovinyl-divinyl copolymerizations

The critical conditions in which the classical Flory-Stockmayer gelation theory (F-S theory) is applicable to monovinyl-divinyl copolymerizations were pursued in detail. The resulting prepolymers or precursors of ideal crosslinked-polymers were characterized as standard polymers for the discussion of network formation in free-radical monovinyl-divinyl copolymerizations. Methyl methacrylate was copolymerized with a small amount of ethylene dimethacrylate, butylene dimethacrylate or nonapropyleneglycol dimethacrylate in the presence of lauryl mercaptan, a chain transfer agent to reduce the occurrence of a thermodynamic excluded volume effect and intramolecular crosslinking as the primary and secondary factors, respectively, for the greatly delayed gelation in the free-radical monovinyl-divinyl copolymerizations and, moreover, to keep the primary chain length constant by inhibiting a gel effect. The ratio of the actual gel point to the theoretical one reached 1.1, supporting the validity of F-S theory. The resulting prepolymers were subjected to SEC-MALLS analysis to determine the molecular weights, the molecular-weight distributions and the radii of gyration; the correlations of molecular weight vs. elution volume and radius of gyration vs. molecular weight were useful for the characterization of the precursors of ideal network-polymers.     

Theory of rough surface effects on the anisotropic BCS states

We present a Green's function theory of the rough surface effects on the anisotropic BCS states using the formulation developed in the randomly rippled wall model. It is shown that the randomly rippled wall formulation is general enough to treat rough surface effects from the specular limit to the diffusive limit. We propose a statistical wall configuration such that gives the diffusive limit in the normal state. Within the weak coupling theory, we give a formal solution of the quasi-classical Green's function in a slab geometry and in a semi-infinite geometry with arbitrarily rough surfaces. The formal solution already satisfies the boundary condition. In the diffusive limit, the present theory correctly recovers the linearized gap equation obtained by Kjäldman et al. for the p-wave state in a slab geometry.     

Failure to reject an allografted tumor after elimination of macrophages in mice

After an i.p. transplantation of an allogeneic tumor (Meth A) to C57BL/6 mice, a macrophage (M phi)-rich, non-T, non-NK cell population is induced as the major infiltrate and cytotoxic cells. We here evaluated the role of the M phi s in the rejection of allografted Meth A cells and characterized the M phi s in comparison with other well-known M phi s. At all time intervals after transplantation, the highest cytotoxic activities against Meth A tumor were obtained with the M phi-rich population. In addition, the lymphocyte-rich population had a significant but low cytotoxic activity, whereas two other population types, granulocytes and large granular cells, were inactive. When the M phi-rich or the T cell-depleted M phi-rich population was i.p. transplanted simultaneously with Meth A cells into untreated C57BL/6 mice, the tumor cells were rejected without growth. After specific elimination of M phi s by in vivo application of dichloromethylene diphosphonate-containing liposomes, the cytotoxic activity against Meth A cells was hardly induced at the transplantation site of Meth A cells and the allografted Meth A tumor continued to grow, indicating that a type of M phi is the effector cell essential for the rejection. In contrast to other well-known M phi s, the cytotoxic activity against Meth A cells was cell-to-cell contact dependent and soluble factor (e.g., NO and TNF-alpha) independent. Moreover, the cytotoxic activity of the M phi s (H-2b) against 51Cr-labeled Meth A (H-2d) cells was inhibited by the addition of unlabeled H-2d, but not H-2b, H-2k or H-2h, lymphoblasts as well as Meth A cells, implying the specific interaction of the M phi s with H-2d cells.     

Ectopic accumulation of 99mTc-HMDP in primary lung cancer in comparison with CT findings

Hypertension attributable to pheochromocytoma is a very attractive model for the elucidation of the pathogenesis of hypertension. Sixteen different point mutations in the RET proto-oncogene and 30 mutations in the Von Hippel-Lindau (VHL) tumor suppressor gene have been identified so far associated with expression of pheochromocytoma. Each of these mutations initiates either the syndrome of multiple endocrine neoplasia type 2 (MEN 2) (MEN 2A and MEN 2B) or the VHL disease. Certain mutations in both genes are associated with the presence of pheochromocytoma. In general, these pheochromocytomas produce catecholamines that result in hypertension. Therefore, analysis for germline mutations in these genes are of practical value, because susceptibility to these diseases can be predicted in as yet clinically unaffected relatives.